Bourns H-46-6A Turns-counting dial Datasheet

T
PL
IA
N
M
CO
*R
oH
S
Features
Applications
■ Large package size
■ Power supplies
■ For use with precision potentiometers up to
■ Sensors
■
■
■
■
20 turns
Excellent readability
Precision feel - no backlash
Cast housing
RoHS compliant*
■ Medical
■ Automation
■ Test equipment
H-46 Turns-Counting Dial
Mechanical and Physical Characteristics
Number of Turns ............................................................................................................................................................................. 0 to 20
Dial Divisions ...........................................................................................................................................................................100 per turn
Readability – Over 10 Turns .....................................................................................................................................Within 1/100 of a turn
Torque With Brake Engaged ..............................................................................................................21.18 N-cm (30.0 oz.-in.) maximum
Markings ..................................................................................................................................................... Black on chrome background
Locking Brake .......................................................................................................................................................................................Yes
Weight ............................................................................................................................................................................73 grams (2.5 oz.)
Set Screw ..........................................................................................................................................................UNC N4-44, one included
Set Screw Tightening Torque ...............................................................................................................16.94 N-cm (1.5 lbs.-in.) minimum
Hex Key Size ........................................................................................................................................................................... 1.5 mm hex
Shaft and Bushing Requirements
Shaft Diameter Requirements ................................................................................................................................... Refer to chart below
Shaft Extension Beyond Panel .................................................................................................................... 17.5 mm (0.689 in.) minimum
23.5 mm (0.925 in.) maximum
Bushing Extension Beyond Panel ................................................................................................................ 4.5 mm (0.177 in.) maximum
H-46 MOUNTING INSTRUCTIONS
Using the existing Antirotation Lug
1. Drill 3.2 mm (0.125) diameter antirotation
pin hole on vertical centerline 14.3 mm
(0.562) below center of potentiometer
mounting hole.
2. Mount potentiometer shaft counterclockwise to obtain minimum resistance or
voltage ratio. This is not necessarily
identical with the mechanical stop.
3. Loosen set screws in knob of dial. Set dial to “0.0” reading.
4. While holding outer ring of dial, position unit lightly against
panel. Tighten knob set screws to potentiometer shaft.
4.
5.
Dimensional Drawings
Using the Antirotation Device
1. Remove antirotation lug from dial
by using pliers.
2. Mount potentiometer in panel with
antirotation device nut (supplied
with dial) and lockwasher (supplied
with potentiometer).
3. Turn potentiometer shaft counterclockwise to obtain minimum
resistance or voltage ratio. This is
not necessarily identical with the
mechanical stop.
Loosen set screws in knob of dial. Set dial to “0.0” reading.
While holding outer ring of dial, position unit lightly against panel.
Tighten knob set screws to potentiometer shaft.
How To Order
Part
Number
24.0
(.944)
12.50
(.492)
PANEL LAYOUT
10.31
DIA.
(.405)
Accepts Shaft
Diameter
H-46-6A
6.35 mm (.250)
H-46-6M
6 mm (.236)
Finish
Satin
Chrome
Satin
Chrome
46.0
(1.811)
DIMENSIONS:
MM
(INCHES)
14.30
(.562)
3.17
DIA.
(.124)
REV. 01/14
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
Similar pages