Sanyo ENA1832A Ultrahigh-speed switching diode Datasheet

RD2006FR
Ordering number : ENA1832A
SANYO Semiconductors
DATA SHEET
RD2006FR
Diffused Junction Silicon Diode
Ultrahigh-Speed Switching Diode
Features
•
•
•
•
VF=1.75V max (IF=20A)
VRRM=600V
trr=21ns (typ.)
Halogen free compliance
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Repetitive Peak Reverse Voltage
VRRM
Average Output Current
Surge Forward Current
IO
IFSM
Junction Temperature
Tj
Storage Temperature
Tstg
Conditions
Ratings
DC bias
Sine wave, 10ms single pulse
A
°C
--55 to +150
°C
Product & Package Information
• Package
: TO-220F-2FS
• JEITA, JEDEC
: SC-67
• Minimum Packing Quantity : 50pcs./magazine
RD2006FR-H
4.7
Marking
Electrical Connection
2
3.23
RD2006
FR LOT No.
1.28
1
12.98
1.47 MAX
0.8
1
2.76
*
0.8 MAX
15.8
15.87
6.68
3.3
2.54
A
220
unit : mm (typ)
7532-001
10.16
V
20
150
Package Dimensions
3.18
Unit
600
2
0.5
part is not a metal
* : This
but a resin
5.08
1 : Cathode
2 : Anode
SANYO : TO-220F-2FS
http://www.sanyosemi.com/en/network/
91912 TKIM/91510SA TKIM TC-00002488 No. A1832-1/6
RD2006FR
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Reverse Voltage
VR
VF
IR
Forward Voltage
Reverse Current
Reverse Recovery Time
Thermal Resistance
Ratings
Conditions
min
IR=1mA
IF=20A
typ
Unit
max
600
V
1.6
trr1
VR=600V
IF=10A, di / dt=100A/μs
trr2
Rth(j-c)
IF=0.5A, IR=1A
Between the junction part and the case smoothing current
1.75
V
100
μA
50
ns
21
ns
3.5
°C / W
Ordering Information
Device
RD2006FR-H
memo
Pb Free and Halogen Free
°C
C
0°
2
=1
Ta
0
0.5
5
1.0
1.5
(2)
(3)
(4)
360°
25
Rectangular
wave
20
θ
360°
15
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
(5)DC
10
5
0
5
0
10
15
20
25
Average Output Current, IO -- A
Surge Forward Current, IFSM(Peak) -- A
20ms
t
200
180
160
140
120
5 7 0.1
2
3
5
Time, t -- s
7 1.0
2
3
5 7 10
IT15949
100
IT15946
Tc max -- IO
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
(5)DC
125
100
75
(4)
50
0
(3)
(2)
10
5
15
(5)
20
25
Average Output Current, IO -- A
IT15948
IFSM -- Pulse Time
450
IS
3
10
1.0
150
25
30
Current waveform 50Hz sine wave
2
2
(1)
220
100
0.01
3
IT15947
IFSM -- t
240
5
(5)
Case Temperature, Tc max -- °C
180°
7
175
35
30
100
Reverse Voltage, VR -- V
Surge Forward Current, IFSM(Peak) -- A
Average Forward Power Dissipation, PF(AV) -- W
(1)
2
IT15945
PF(AV) -- IO
Sine wave
3
10
0.1
2.0
Forward Voltage, VF -- V
40
f=100kHz
7
25°C
Junction Capacitance, Cj -- pF
70
10
7
5
3
2
1.0
7
5
3
2
Cj -- VR
1000
--4
0°
C
Forward Current, IF -- A
Shipping
50pcs./magazine
IF -- VF
100
7
5
3
2
0.1
7
5
3
2
0.01
7
5
3
2
0.001
Package
TO-220F-2FS
IS
400
t
350
300
250
200
150
0
2
4
6
Time, t -- ms
8
10
12
IT15950
No. A1832-2/6
Transient Thermal Resistance, Rth(j-c) -- °C / W
RD2006FR
Rth(j-c) -- t
10
7
5
3
2
1.0
7
5
3
2
0.1
0.001 2 3
5 70.01
2 3
5 7 0.1
2 3
Time, t -- s
5 7 1.0
2 3
5 7 10
IT15951
No. A1832-3/6
RD2006FR
Magazine Specification
RD2006FR-H
No. A1832-4/6
RD2006FR
Outline Drawing
RD2006FR-H
Mass (g) Unit
1.8
mm
* For reference
No. A1832-5/6
RD2006FR
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for new introduction or other application
different from current conditions on the usage of automotive device, communication device, office equipment,
industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.)
prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be
solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer' s
products or equipment.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,
high current, high voltage, or drastic temperature change, even if it is used within the range of absolute
maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a
confirmation.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of September, 2012. Specifications and information herein are subject
to change without notice.
PS No. A1832-6/6
Similar pages