Coilcraft LPS4414-335ML Shielded power inductors â lps4414 Datasheet

Document 548-1
Shielded Power Inductors – LPS4414
• Very low DCR; excellent current handling
• 4.4 × 4.4 mm footprint; only 1.4 mm tall
Designer’s Kit C340 contains 3 of each values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 82.3 – 89.8 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth
Recommended pick and place nozzle: OD: 4.5 mm; ID: ≤ 2 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5 Irms (A)6
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS4414-301ML_
LPS4414-501ML_
LPS4414-701ML_
LPS4414-102ML_
LPS4414-152ML_
LPS4414-182ML_
LPS4414-222ML_
LPS4414-332ML_
LPS4414-472ML_
LPS4414-562ML_
LPS4414-682ML_
LPS4414-822ML_
LPS4414-103ML_
LPS4414-123ML_
LPS4414-153ML_
LPS4414-183ML_
LPS4414-223ML_
LPS4414-333ML_
LPS4414-473ML_
LPS4414-563ML_
LPS4414-683ML_
LPS4414-104ML_
LPS4414-124ML_
LPS4414-154ML_
LPS4414-224ML_
LPS4414-334ML_
LPS4414-474ML_
LPS4414-564ML_
LPS4414-684ML_
LPS4414-824ML_
LPS4414-105ML_
LPS4414-155ML_
LPS4414-185ML_
LPS4414-225ML_
LPS4414-335ML_
0.30
0.50
0.70
1.0
1.5
1.8
2.2
3.3
4.7
5.6
6.8
8.2
10
12
15
18
22
33
47
56
68
100
120
150
220
330
470
560
680
820
1000
1500
1800
2200
3300
0.040
0.050
0.055
0.060
0.078
0.087
0.110
0.165
0.215
0.260
0.270
0.350
0.380
0.380
0.440
0.530
0.590
0.715
0.935
1.15
1.35
1.90
2.60
3.10
4.10
6.00
9.50
10.7
11.7
15.1
16.3
26.4
35.0
42.5
56.0
470
330
225
190
150
130
115
85.0
68.0
58.0
54.0
50.0
43.0
38.0
36.0
31.0
27.0
23.0
18.0
16.0
14.6
11.0
10.0
9.0
6.7
5.6
4.3
4.0
3.5
3.0
2.6
2.2
1.9
1.9
1.3
5.6
4.3
3.7
3.0
2.9
2.7
2.2
1.8
1.4
1.4
1.2
1.1
1.1
0.94
0.85
0.76
0.69
0.47
0.39
0.37
0.32
0.26
0.23
0.22
0.18
0.14
0.13
0.12
0.10
0.10
0.10
0.096
0.089
0.082
0.072
5.7
4.4
3.75
3.1
3.1
2.8
2.3
1.9
1.5
1.4
1.3
1.3
1.2
0.97
0.89
0.80
0.72
0.49
0.42
0.39
0.33
0.28
0.24
0.23
0.20
0.16
0.14
0.13
0.11
0.105
0.102
0.099
0.094
0.089
0.078
5.8
4.5
3.8
3.2
3.2
2.9
2.35
1.95
1.55
1.5
1.4
1.3
1.3
1.0
0.92
0.82
0.74
0.51
0.43
0.40
0.34
0.285
0.25
0.24
0.20
0.165
0.145
0.14
0.12
0.11
0.106
0.100
0.097
0.092
0.083
2.35
2.10
1.85
1.75
1.55
1.50
1.25
1.15
0.90
0.75
0.70
0.70
0.70
0.66
0.63
0.56
0.53
0.49
0.44
0.42
0.36
0.31
0.27
0.24
0.22
0.17
0.14
0.13
0.13
0.11
0.10
0.085
0.075
0.065
0.055
3.25
2.80
2.50
2.30
2.00
1.90
1.60
1.50
1.20
1.10
1.00
0.98
0.95
0.88
0.82
0.75
0.68
0.65
0.58
0.54
0.48
0.40
0.34
0.32
0.29
0.23
0.23
0.17
0.17
0.14
0.13
0.11
0.10
0.080
0.070
1. Please specify termination and packaging codes:
LPS4414-223MLC
Termination: L = RoHS compliant silver-palladiumplatinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current at which the inductance drops the specified
amount from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 548-1
Revised 11/21/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 548-2
Shielded Power Inductors – LPS4414 Series
Typical L vs Current
Typical L vs Frequency
10000
10000
3300 µH
3300 µH
330 µH
100
100 µH
33 µH
10
10 µH
3.3 µH
1
0.1
0.1
Current (A)
1
330 µH
100 µH
100
33 µH
10 µH
10
3.3 µH
1 µH
1
1 µH
0.01
1000 µH
1000
1000 µH
Inductance (µH)
Inductance (µH)
1000
10
Current Derating
0.1
0.01
1
0.1
10
Frequency (MHz)
0.169 ±0.004
4,30 ±0,10
0.169 ±0.004
4,30 ±0,10
100
XXX X
90
80
70
Dash
number
60
0.0551 max
*
1,40
40
30
20
10
0
Winding
direction
Internal
code
50
25°C
Percent of rated current
120
110
Isat
Irms
-40
-20
0
20
Recommended
Land Pattern
0.128
3,25
0.059
1,50
40
60
80
100
120 140
0.030 typ
0,75
Ambient temperature (°C)
0.185
4,70
0.118
3,00
0.030 typ
0,75
* For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
Dimensions are in
0.124
3,15
0.055
1,40
0.059
1,50
0.118
3,00
0.185
4,70
inches
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 548-2
Revised 11/21/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages