NJRC NJG1553F-C4 1.5ghz/1.9ghz mixer gaas mmic Datasheet

NJG1553F
1.5GHz/1.9GHz MIXER GaAs MMIC
nGENERAL DESCRIPTION
nPACKAGE OUTLINE
NJG1553F is a mixer GaAs MMIC featured low distortion,
high conversion gain and low noise figure.
This mixer includes a local amplifier, and ideally suitable
for 1.5/1.9Hz band digital mobile phone and PHS handsets.
The very small MTP package is adopted.
NJG1553F
nFEATURES
lLow voltage operation
lHigh conversion gain
+2.7V
9dB typ. @fRF= 1489.0MHz, PLO= -10dBm, PRF= -30dBm
7dB typ. @fRF= 1900MHz, PLO= -10dBm, PRF= -30dBm
-1dBm typ. @fRF1= 1489.0MHz, fRF2= 1489.1MHz
PLO= -10dBm, PRF= -30dBm
4dBm typ. @fRF1= 1900.0MHz, fRF2= 1900.1MHz
PLO= -10dBm, PRF= -25dBm
6dB typ. @fRF= 1489.0MHz, PLO= -10dBm
9dB typ. @fRF= 1900MHz, PLO= -10dBm
MTP6 (Mount Size: 2.8 x 2.9 x 1.2mm)
lHigh Input IP3
lLow noise figure
lPackage
nPIN CONFIGURATION
F Type
(Top View)
1
6
PIN Connection
1. IFOUT
2. BPC
2
5
3. VLO
4. LOIN
5. GND
3
4
6. RFIN
NOTE :The
portion above shows orientation mark
printed on the package surface.
-1-
NJG1553F
nABSOLUTE MAXIMUM RATINGS
PARAMETERS
Mixer Supply Voltage
Local Amplifier Supply
Voltage
Mixer RF Input Power
Mixer LO Input Power
Power Dissipation
Operating Temperature
Storage Temperature
SYMBOL
VMIX
(Ta=25°C, Zs=Zl=50Ω)
RATINGS
UNITS
5
V
CONDITIONS
VLO
PRFIN
PLOIN
PD
Topr
Tstg
VMIX=2.7V, VLO=2.7V
VMIX=2.7V, VLO=2.7V
5
V
10
10
150
-30~+85
-40~+150
dBm
dBm
mW
°C
°C
nRECOMMENDED OPERATING RANGE
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
Mixer Supply Voltage
VMIX
2.5
2.7
4.5
V
Local Amplifier Supply
Voltage
VLO
2.5
2.7
4.5
V
nELECTRICAL CHARACTERISTICS (DC)
(Ta=25°C, VMIX=2.7V, VLO=2.7V)
PARAMETERS
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Mixer Current
IMIX
PRF=OFF, PLO=OFF
-
5.0
7.0
mA
Local Amplifier Current
ILO
PRF=OFF, PLO=OFF
-
2.0
3.2
mA
-2-
NJG1553F
nELECTRICAL CHARACTERISTICS (RF 1.5GHz band)
(Ta=25°C, VMIX=2.7V, VLO=2.7V, fIF=130MHz, PLO=-10dBm
Application 1.5GHz, fLO=1619MHz)
CONDITIONS
MIN TYP MAX UNITS
PARAMETERS
SYMBOL
Conversion Gain
3rd Order Intercept
Point
Noise Figure
G C1
fRF=1489MHz, PRF=-30dBm
6.0
9.0
-
dB
IIP3_1
fRF=1489.0MHz+1489.1MHz
-
-1.0
-
dBm
fRF=1489.0MHz
-
6.0
8.0
dB
NF1
nELECTRICAL CHARACTERISTICS (RF 1.9GHz band)
PARAMETERS
Conversion Gain
3rd Order Intercept
Point
Noise Figure
(Ta=25°C, VMIX=2.7V, VLO=2.7V, fIF=240MHz, PLO=-10dBm
Application 1.9GHz, fLO=1660MHz)
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
G C2
fRF=1900MHz, PRF=-30dBm
4.0
7.0
dB
IIP3_2
NF2
fRF=1900.0MHz+1900.1MHz
-
4.0
-
dBm
fRF=1900.0MHz
-
9.0
11.0
dB
-3-
NJG1553F
nTYPICAL CHARACTERISTICS (Application 1 1.5GHz, fLO=1619MHz)
Conversion Gain , Noise Figure
vs. LO Power
IF , IM3 , IM5 vs. RF Power
14
20
8
12
0
6
10
4
8
10
2
-40
-30
-20
-10
0
IF
-20
-40
IM3
6
-60
4
-80
-50
10
-40
-30
Condition
fIF=130MHz
fRF=1489MHz,PRF=-30dBm
fLO=1619MHz
VMIX=VLO=2.7V
-10
0
Condition
fIF=130MHz
fRF1=1489.0MHz
fRF2=1489.1MHz
fLO=1619MHz,PLO=-10dBm
VMIX=VLO=2.7V
Conversion Gain , Noise Figure , Input-IP3
vs. V
,V
Input-IP3 vs. LO Power
MIX
14
2
Conversion Gain (dB)
0
IIP3 (dBm)
-20
RF Power (dBm)
LO Power (dBm)
IIP3
-2
IM5
-4
-6
-8
LO
NF
12
10
8
6
4
Gc
8
2
IIP3
6
0
-10
-12
-50
-40
-30
-20
-10
LO Power (dBm)
Condition
fIF=130MHz
fRF1=1489.0MHz,PRF=-30dBm
fRF2=1489.1MHz
fLO=1619MHz
VMIX=VLO=2.7V
3IF-IM3
-Gc
IIP3=
2
@PRF=-30dBm
-4-
0
10
4
1.5
-2
2
2.5
3
V
MIX
3.5
,V
LO
4
4.5
(V)
Condition
fIF=130MHz
fRF1=1489.0MHz,PRF=-30dBm
fRF2=1489.1MHz
fLO=1619MHz,PLO=-10dBm
3IF-IM3
IIP3=
-Gc
2
@PRF=-30dBm
5
NF (dB) , IIP3 (dBm)
0
-50
IF , IM3 , IM5 (dBm)
NF
Noise Figure (dB)
Conversion Gain (dB)
Gc
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
Condition
fIF=130MHz
fRF=1489MHz
fLO=1619MHz
VMIX=VLO=2.7V
Condition
fIF=130MHz
fRF=1489MHz,PRF=-30dBm
fLO=1619MHz
VMIX=VLO=2.7V
14
12
12
10
Gc
8
10
8
6
NF
Noise Figure (dB)
Conversion Gain (dB)
Conversion Gain , Noise Figure
vs. RF Frequency
4
6
2
4
1475 1480 1485 1490 1495 1500 1505 1510 1515
RF Frequency (MHz)
Condition
fIF=130MHz
fRF1=1489.0MHz,PRF=-30dBm
fRF2=1489.1MHz
fLO=1619MHz
VMIX=VLO=2.7V
Condition
fIF=130MHz
PRF=-30dBm
PLO=-10dBm
VMIX=VLO=2.7V
Upper LOCAL
3IF-IM3
IIP3=
-Gc
2
@PRF=-30dBm
-5-
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
Condition
fIF=130MHz
fRF=1489MHz,PRF=-30dBm
fLO=1619MHz,PLO=-10dBm
Condition
fIF=130MHz
fRF1=1489.0MHz,PRF=-30dBm
fRF2=1489.1MHz
fLO=1619MHz,fLO=-10dBm
3IF-IM3
-Gc
IIP3=
2
@PRF=-30dBm
-6-
Condition
fIF=130MHz
fRF=1489MHz
fLO=1619MHz,PLO=-10dBm
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
RFIN PORT EXTERNAL MATCHING NETWORK IMPEDANCE PLOT
LOIN PORT EXTERNAL MATCHING NETWORK IMPEDANCE PLOT
-7-
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
IFOUT PORT EXTERNAL MATCHING NETWORK IMPEDANCE PLOT
-8-
NJG1553F
nTYPICAL CHARACTERISTICS (Application 1 1.9GHz, fLO=1660MHz)
18
6
16
4
14
Gc
2
12
0
10
NF
-2
-20
-10
0
IM3
-40
IM5
-80
-50
6
-30
IF
-20
-60
8
-40
0
10
-40
-30
0
Condition
fIF=240MHz
fRF1=1900.0MHz
fRF2=1900.1MHz
fLO=1660MHz,PLO=-10dBm
VMIX=VLO=2.7V
Condition
fIF=240MHz
fRF=1900MHz,PRF=-30dBm
fLO=1660MHz
VMIX=VLO=2.7V
Conversion Gain , Noise Figure , Input-IP3
vs. V
,V
Input-IP3 vs. LO Power
10
4
9
Conversion Gain (dB)
6
2
IIP3 (dBm)
-10
RF Power (dBm)
LO Power (dBm)
IIP3
0
-2
-4
-6
-8
-50
-20
MIX
LO
10
9
NF
8
8
7
7
Gc
6
6
5
5
IIP3
4
-40
-30
-20
-10
LO Power (dBm)
Condition
fIF=240MHz
fRF1=1900.0MHz,PRF=-25dBm
fRF2=1900.1MHz
fLO=1660MHz
VMIX=VLO=2.7V
3IF-IM3
IIP3=
-Gc
2
@PRF=-25dBm
0
10
3
1.5
NF (dB) , IIP3 (dBm)
-4
-50
IF , IM3 , IM5 vs. RF Power
20
IF , IM3 , IM5 (dBm)
8
Noise Figure (dB)
Conversion Gain (dB)
Conversion Gain , Noise Figure
vs. LO Power
4
3
2
2.5
3
V
MIX
3.5
,V
LO
4
4.5
5
(V)
Condition
fIF=240MHz
fRF1=1900.0MHz,PRF=-30dBm
fRF2=1900.1MHz
fLO=1660MHz,PLO=-10dBm
3IF-IM3
-Gc
IIP3=
2
@PRF=-25dBm
-9-
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
Condition
fIF=240MHz
fRF=1900MHz
fLO=1660MHz
VMIX=VLO=2.7V
Conversion Gain (dB)
14
Conversion Gain , Noise Figure
vs. RF Frequency
12
NF
10
8
Gc
7
6
6
1895
1900
1905
1910
1915
RF Frequency (MHz)
3IF-IM3
-Gc
IIP3=
2
@PRF=-25dBm
- 10 -
9
8
4
1890
Condition
fIF=240MHz
fRF1=1900.0MHz,PRF=-25dBm
fRF2=1900.1MHz
fLO=1660MHz
VMIX=VLO=2.7V
10
Condition
fIF=240MHz
PRF=-30dBm
PLO=-10dBm
VMIX=VLO=2.7V
Lower LOCAL
1920
5
1925
Noise Figure (dB)
Condition
fIF=240MHz
fRF=1900MHz,PRF=-30dBm
fLO=1660MHz
VMIX=VLO=2.7V
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
Condition
fIF=240MHz
fRF=1900MHz,PRF=-30dBm
fLO=1660MHz,PLO=-10dBm
Condition
fIF=240MHz
fRF=1900MHz
fLO=1660MHz,PLO=-10dBm
Condition
fIF=240MHz
fRF1=1900.0MHz,PRF=-25dBm
fRF2=1900.1MHz
fLO=1660MHz,fLO=-10dBm
3IF-IM3
-Gc
IIP3=
2
@PRF=-25dBm
- 11 -
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
RFIN PORT EXTERNAL MATCHING NETWORK IMPEDANCE PLOT
LOIN PORT EXTERNAL MATCHING NETWORK IMPEDANCE PLOT
- 12 -
NJG1553F
nTYPICAL CHARACTERISTICS (Continued)
IFOUT PORT EXTERNAL MATCHING NETWORK IMPEDANCE PLOT
nTYPICAL CHARACTERISTICS (Application 1 1.9GHz, fLO=2110MHz)
Conversion Gain , Noise Figure
vs. RF Frequency
8
7
10
0
9
Gc
8
6
5
1890
20
7
1895
1900
1905
1910
1915
RF Frequency (MHz)
Condition
fIF=210MHz
PRF=-30dBm
PLO=-10dBm
VMIX=VLO=2.7V
Upper LOCAL
1920
6
1925
IF , IM3 (dBm)
NF
9
IF , IM3 vs. RF Power
11
Noise Figure (dB)
Conversion Gain (dB)
10
IF
-20
-40
-60
-80
-50
IM3
-40
-30
-20
-10
0
10
RF Power (dBm)
Condition
fIF=210MHz
fRF1=1900.0MHz
fRF2=1900.1MHz
fLO=2110MHz,PLO=-10dBm
VMIX=VLO=2.7V
- 13 -
NJG1553F
nTYPICAL CHARACTERISTICS (Application 1 1.9GHz, fLO=1634.62MHz)
IF , IM3 vs. RF Power
8
20
6
18
4
16
2
14
20
Gc
0
12
-2
10
NF
IF , IM3 (dBm)
0
Noise Figure (dB)
Conversion Gain (dB)
Conversion Gain , Noise Figure
vs. LO Power
IF
-20
-40
IM3
-60
-4
8
-6
-50
6
-40
-30
-20
-10
0
-80
-50
10
-40
LO Power (dBm)
-30
-20
-10
0
RF Power (dBm)
Condition
fIF=220.38MHz
fRF1=1855.0MHz
fRF2=1855.1MHz
fLO=1634.62MHz,PLO=-10dBm
VMIX=VLO=2.7V
Condition
fIF=220.38MHz
fRF=1855MHz,PRF=-30dBm
fLO=1634.62MHz
VMIX=VLO=2.7V
nTYPICAL CHARACTERISTICS (Application 1 1.9GHz, fLO=1749.62MHz)
Conversion Gain vs. LO Power
IF , IM3 vs. RF Power
8
20
Gc
0
4
IF , IM3 (dBm)
Conversion Gain (dB)
6
2
0
-2
IF
-20
-40
-4
IM3
-60
-6
-8
-50
-40
-30
-20
-10
LO Power (dBm)
Condition
fIF=210.38MHz
fRF=1960MHz,PRF=-30dBm
fLO=1749.62MHz
VMIX=VLO=2.7V
- 14 -
0
10
-80
-50
-40
-30
-20
-10
RF Power (dBm)
Condition
fIF=210.38MHz
fRF1=1960.0MHz
fRF2=1960.1MHz
fLO=1749.62MHz,PLO=-10dBm
VMIX=VLO=2.7V
0
NJG1553F
nTYPICAL CHARACTERISTICS (Application 1 2.1GHz, fLO=1914.62MHz)
Conversion Gain vs. LO Power
IF , IM3 vs. RF Power
20
0
Gc
5
IF , IM3 (dBm)
Conversion Gain (dB)
10
0
IF
-20
-40
-5
IM3
-60
-10
-50
-40
-30
-20
-10
0
-80
-50
10
-40
-30
-20
-10
LO Power (dBm)
RF Power (dBm)
Condition
fIF=220.38MHz
fRF=2135MHz,PRF=-30dBm
fLO=1914.62MHz
VMIX=VLO=2.7V
Condition
fIF=220.38MHz
fRF1=2135.0MHz
fRF2=2135.1MHz
fLO=1914.62MHz,PLO=-10dBm
VMIX=VLO=2.7V
0
nTYPICAL CHARACTERISTICS (Application 2 1.9GHz, fLO=2110MHz)
Conversion Gain , Noise Figure
vs. RF Frequency
11
IF , IM3 vs. RF Power
10
20
9
0
8
8
7
Gc
7
6
1890
6
1895
1900
1905
1910
1915
RF Frequency (MHz)
Condition
fIF=210MHz
PRF=-30dBm
PLO=-10dBm
VMIX=VLO=2.7V
Upper LOCAL
1920
5
1925
IF , IM3 (dBm)
9
Noise Figure (dB)
Conversion Gain (dB)
NF
10
IF
-20
-40
IM3
-60
-80
-50
-40
-30
-20
-10
0
10
RF Power (dBm)
Condition
fIF=210MHz
fRF1=1900.0MHz
fRF2=1900.1MHz
fLO=2110MHz,PLO=-10dBm
VMIX=VLO=2.7V
- 15 -
NJG1553F
nAPPLICATION CIRCUIT 1
PARTS LIST 1
1.5GHz Band
PART ID
L1
L2
L3
L4
L5
L6
L7
C1
C2
C3
C4
C5
C6
C7
C8
R1
R2
- 16 -
1.9GHz BAND
Upper LOCAL
Lower LOCAL
Upper LOCAL
fLO=1619MHz
fIF=130MHz
10nH
8.2nH
12nH
12nH
6.8nH
100nH
47nH
1000pF
11pF
100pF
100pF
1000pF
10pF
100pF
1000pF
270Ω
270Ω
fLO=1660MHz
fIF=240MHz
6.8nH
4.7nH
12nH
10nH
5.6nH
39nH
15nH
560pF
8pF
100pF
100pF
1000pF
10pF
100pF
1000pF
270Ω
470Ω
fLO=2110MHz
fIF=210MHz
4.7nH
3.3nH
6.8nH
5.6nH
3.9nH
47nH
27nH
560pF
8pF
100pF
100pF
1000pF
10pF
100pF
1000pF
240Ω
430Ω
COMMENT
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
TAMA Electronics(CRG16G)
TAMA Electronics(CRG16G)
NJG1553F
nAPPLICATION CIRCUIT 1
PARTS LIST 2
1.9GHz Band
2.1GHz Band
Lower LOCAL Lower LOCAL Lower LOCAL
COMMENT
PART ID fLO=1634.62MHz fLO=1749.62MHz fLO=1914.62MHz
fIF=220.38MHz fIF=210.38MHz fIF=220.38MHz
L1
6.8nH
6.8nH
4.7nH
TAIYO-YUDEN(HK1608)
L2
4.7nH
4.7nH
3.9nH
TAIYO-YUDEN(HK1608)
L3
12nH
12nH
10nH
TAIYO-YUDEN(HK1608)
L4
10nH
8.2nH
6.8nH
TAIYO-YUDEN(HK1608)
L5
6.8nH
5.6nH
4.7nH
TAIYO-YUDEN(HK1608)
L6
39nH
39nH
39nH
TAIYO-YUDEN(HK1608)
L7
22nH
22nH
22nH
TAIYO-YUDEN(HK1608)
C1
560pF
560pF
560pF
MURATA(GRM39)
C2
8pF
8pF
8pF
MURATA(GRM39)
C3
10pF
10pF
10pF
MURATA(GRM39)
C4
100pF
100pF
100pF
MURATA(GRM39)
C5
1000pF
1000pF
1000pF
MURATA(GRM39)
C6
10pF
10pF
10pF
MURATA(GRM39)
C7
100pF
100pF
100pF
MURATA(GRM39)
C8
1000pF
1000pF
1000pF
MURATA(GRM39)
R1
TAMA Electronics(CRG16G)
240Ω
270Ω
330Ω
R2
MURATA(GRM39)
430Ω
390Ω
470Ω
- 17 -
NJG1553F
nAPPLICATION CIRCUIT 2
This circuit is purposed for improving input IP3 performance by setting mixer current to around
10mA by adding external resistance to BPC terminal.
Reference value
Application 1
IIP3=+4dBm
Application 2
IIP3=+5.1dBm
PARTS LIST
1.9GHz Band
Upper LOCAL
PART ID
L1
L2
L3
L4
L5
L6
L7
C1
C2
C3
C4
C5
C6
C7
C8
R1
R2
R3
- 18 -
fLO=2110MHz
fIF=210MHz
4.7nH
3.3nH
6.8nH
4.7nH
3.9nH
47nH
27nH
560pF
8pF
100pF
1000pF
1000pF
10pF
100pF
1000pF
240Ω
430Ω
82Ω
COMMENT
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
TAIYO-YUDEN(HK1608)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
MURATA(GRM39)
TAMA Electronics(CRG16G)
TAMA Electronics(CRG16G)
TAMA Electronics(CRG16G)
NJG1553F
nRECOMMENDED PCB DESIGN
IFOUT
(TOP VIEW)
VMIX
C5
VLO
L5
PCB : FR-4, t=0.5mm
C8
C7
STRIPLINE WIDTH=1mm
C6
(Zo=50Ω)
C2
R2
NJG1553F
L3
1
RFIN
L1
L2
C3
C1
R1
L4
LOIN
C4
L6
L7
(SIZE: 22.5mm x 30mm)
PRECAUTIONS
[1] Please locate L5 and R1 close to VLO terminal (3).
[2] Distance from L1 and RFIN terminal (6) is 3.5mm.
[3] Distance from L3 and LOIN terminal (4) is 3.5mm.
[4] Please locate C1 close to BPC terminal (2).
[5] Please locate C6, C7, C8 close to C2, L7.
[6] Please locate C3, C4 close to R1, L5.
- 19 -
NJG1553F
nMEASURING BLOCK DIAGRAM
Vdd=2.7V
VMIX
SG
(LOCAL)
VLO
IFOUT
D.U.T.
PCB
LOIN
Spectrum
Analyzer
RFIN
SG
(RF)
Conversion Gain Measurement Block Diagram
Vdd=2.7V
VMIX
BPF
SG
(LOCAL)
LOIN
VLO
D.U.T.
PCB
IFOUT
NF Meter
RFIN
Noise
Source
BPF
Noise Figure Measurement Block Diagram
Vdd=2.7V
VMIX
SG
(LOCAL)
LOIN
VLO
D.U.T.
PCB
IFOUT
Spectrum
Analyzer
RFIN
SG
(RF1)
SG
(RF2)
Power
Comb
.
ATT
IF , IM3 , IM5 Measurement Block Diagram
- 20 -
NJG1553F
nPACKAGE OUTLINE (MTP6)
Lead material
: Copper
Lead surface finish
: Solder plating
Molding material
: Epoxy resin
Unit
: mm
Weight
: 14mg
Cautions on using this product
This product contains Gallium-Arsenide (GaAs) which is a harmful material.
• Do NOT eat or put into mouth.
• Do NOT dispose in fire or break up this product.
• Do NOT chemically make gas or powder with this product.
• To waste this product, please obey the relating law of your country.
[CAUTION]
The specifications on this databook are only
given for information , without any guarantee
as regards either mistakes or omissions. The
application circuits in this databook are
described only to show representative usages
of the product and not intended for the
guarantee or permission of any right including
the industrial rights.
This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with
care to avoid these damages.
- 21 -
Similar pages