Maxim MAX392EUE Precision, quad, spst analog switch Datasheet

19-0236; Rev 1; 6/99
Precision, Quad, SPST Analog Switches
These switches are also fully specified for single +5V
operation, with 2Ω max RON match, 60Ω max RON, and
6Ω max flatness.
These low-voltage switches also offer 5pC max charge
injection, and ESD protection is greater than 2000V, per
method 3015.7.
Features
♦ Low On-Resistance, 20Ω Typical
♦ Guaranteed On-Resistance Match Between
Channels, <2Ω
♦ Guaranteed On-Resistance Flatness Over Signal
Range, 4Ω Max
♦ Guaranteed Charge Injection, <5pC
♦ Improved Leakage Over Temperature,
<2.5nA at +85°C
♦ Electrostatic Discharge >2000V per Method
3015.7
♦ Single-Supply Operation (+3V to +15V)
Bipolar-Supply Operation (±3V to ±8V)
♦ Low Power Consumption, <1µW
♦ TTL/CMOS-Logic Compatible
Ordering Information
PART
________________________Applications
Battery-Operated Systems Sample-and-Hold Circuits
Heads-Up Displays
Guidance and Control Systems
Audio and Video Switching Military Radios
Test Equipment
Communications Systems
±5V DACs and ADCs
PBX, PABX
TEMP. RANGE
PIN-PACKAGE
MAX391CPE
0°C to +70°C
16 Plastic DIP
MAX391CSE
MAX391CUE
MAX391C/D
MAX391EPE
MAX391ESE
MAX391EUE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
16 Narrow SO
16 TSSOP
Dice*
16 Plastic DIP
16 Narrow SO
16 TSSOP
Ordering Information continued at end of data sheet.
* Contact factory for dice specifications.
** Contact factory for availability and processing to MIL-STD-883.
_____________________Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
IN1
1
16 IN2
COM1
2
15 COM2
NC1
3
14 NC2
V-
4
13 V+
GND
5
NC4
6
COM4
7
10 COM3
IN4
8
MAX391
IN1
1
16 IN2
COM1
2
15 COM2
NO1
3
14 NC2
V-
4
13 V+
12 N.C.
GND
5
11 NO3
NO4
6
11 NC3
COM4
7
10 COM3
IN4
8
IN1
1
COM1
2
15 COM2
NO1
3
14 NO2
V-
4
13 V+
12 N.C.
GND
5
11 NC3
NO4
6
COM4
7
10 COM3
IN4
8
9
IN3
16 IN2
MAX392
9
DIP/SO/TSSOP
DIP/SO/TSSOP
MAX391
LOGIC
SWITCH
MAX392
LOGIC
SWITCH
0
1
N.C. = NO CONNECT
ON
OFF
0
1
IN3
OFF
ON
MAX393
12 N.C.
9
IN3
DIP/SO/TSSOP
LOGIC
MAX393
SWITCHES
1, 4
SWITCHES
2, 3
0
1
OFF
ON
ON
OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
MAX391/MAX392/MAX393
General Description
The MAX391/MAX392/MAX393 are precision, quad,
single-pole/single-throw (SPST) analog switches
designed to operate at +3V, +5V, or ±5V. The MAX391
has four normally closed (NC) switches, and the
MAX392 has four normally open (NO) switches. The
MAX393 has two NO and two NC switches. All three
devices offer low leakage (100pA max) and fast switching speeds (tON ≤ 130ns, tOFF ≤ 75ns). Power consumption is just 1µW—ideal for battery-operated equipment. All devices operate from a single +3V to +15V
supply or from dual ±3.0V to ±8V supplies.
With ±5V supplies, the MAX391/MAX392/MAX393 offer
guaranteed 2Ω max channel-to-channel matching, 30Ω
max on-resistance (RON), and 4Ω max RON flatness
over the specified range.
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to VV+ .......................................................................-0.3V to +17V
GND....................................................................-0.3V to +17V
GND..........................................................-0.3V to (V+ + 0.3V)
VIN, VCOM, VNC, VNO (Note 1) ........................................V- to V+
Current (any terminal) .........................................................30mA
Peak Current, COM, NO, NC
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
ESD per Method 3015.7 ..................................................>2000V
Note 1:
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above+70°C) ...........842mW
Narrow SO (derate 8.70mW/°C above +70°C) ............696mW
TSSOP (derate 6.7mW/°C above +70°C) ....................457mW
CERDIP (derate 10.00mW/°C above +70°C) ...............800mW
Operating Temperature Ranges
MAX39_C_ _ .......................................................0°C to +70°C
MAX39_E_ _.....................................................-40°C to +85°C
MAX39_M_ _ ..................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Signals on NC, NO, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = +5V ±10%, V- = -5V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
(Note 2)
MAX
UNITS
ANALOG SWITCH
Analog Signal Range
On-Resistance
On-Resistance Match Between
Channels (Note 4)
On-Resistance Flatness
(Note 5)
NO or NC Off Leakage Current
(Note 6)
COM Off Leakage Current
(Note 6)
VCOM,
VNO,
VNC
RON
∆RON
(Note 3)
V-
V+ = 4.5V,
V- = -4.5V,
ICOM = -10mA,
VNO or VNC = ±3.5V
V+ = 5V, V- = -5V,
ICOM = -10mA,
VNO or VNC = ±3V
V+ = 5V, V- = -5V,
RFLAT(ON) ICOM = -10mA,
VNO or VNC = ±3V
INO(OFF)
or
INC(OFF)
V+ = 5.5V,
V- = -5.5V,
VCOM = ±4.5V,
VNO or VNC = 4.5V
±
V+ = 5.5V,
V- = -5.5V,
ICOM(OFF)
VCOM = ±4.5V,
VNO or VNC = 4.5V
±
MAX391/MAX392/MAX393
Precision, Quad, SPST Analog Switches
COM On Leakage Current
(Note 6)
2
ICOM(ON)
V+ = 5.5V,
V- = -5.5V,
VCOM = ±4.5V,
VNO or VNC = ±4.5V
TA =
+25°C
V+
C, E
20
35
M
20
30
TA = TMIN to TMAX
V
Ω
45
TA = +25°C
0.3
2
Ω
TA = TMIN to TMAX
4
TA = +25°C
1
4
Ω
TA = TMIN to TMAX
6
TA = +25°C
-0.1
TA = TMIN C, E
to TMAX
M
-2.5
-5
TA = +25°C
-0.1
TA = TMIN C, E
to TMAX
M
-2.5
-5
TA = +25°C
-0.2
TA = TMIN C, E
to TMAX
M
-5.0
-20
0.01
0.1
2.5
5
0.01
0.1
2.5
5
0.01
_______________________________________________________________________________________
nA
nA
0.2
5.0
20
nA
Precision, Quad, SPST Analog Switches
(V+ = +5V ±10%, V- = -5V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
LOGIC INPUT
Input Current with Input
Voltage High
IINH
IN = 2.4V, all others = 0.8V
-0.5
0.005
0.5
µA
Input Current with Input
Voltage Low
IINL
IN = 0.8V, all others = 2.4V
-0.5
0.005
0.5
µA
Turn-On Time
tON
VCOM = ±3V, Figure 2
65
130
Turn-Off Time
tOFF
VCOM = ±3V, Figure 2
DYNAMIC
TA = +25°C
TA = TMIN to TMAX
175
TA = +25°C
35
TA = TMIN to TMAX
75
100
ns
ns
Break-Before-Make
Time Delay (Note 3)
tD
MAX393 only, RL = 300Ω, CL = 35pF, Figure 3
Charge Injection
(Note 3)
Q
CL = 1.0nF, VGEN = 0V,
RGEN = 0Ω, Figure 4
TA = +25°C
2
RL = 50Ω, CL = 5pF,
f = 1MHz, Figure 5
TA = +25°C
72
dB
RL = 50Ω, CL = 5pF,
f = 1MHz, Figure 6
TA = +25°C
85
dB
f = 1MHz, Figure 7
TA = +25°C
9
pF
COM Off Capacitance
CCOM(OFF) f = 1MHz, Figure 7
TA = +25°C
9
pF
COM On Capacitance
CCOM(ON) f = 1MHz, Figure 8
TA = +25°C
22
pF
Off Isolation (Note 7)
OIRR
Crosstalk (Note 8)
NC or NO Capacitance
C(OFF)
5
10
ns
5
pC
SUPPLY
Power-Supply Range
-8.0
+8.0
V
Positive Supply Current
I+
V+ = 5.5V, V- = -5.5V,
VIN = 0V or V+,
All channels on or off
TA = TMIN to TMAX
-1
1
µA
Negative Supply
Current
I-
V+ = 5.5V, V- = -5.5V,
VIN = 0V or V+,
All channels on or off
TA = TMIN to TMAX
-1
1
µA
_______________________________________________________________________________________
3
MAX391/MAX392/MAX393
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
MAX391/MAX392/MAX393
Precision, Quad, SPST Analog Switches
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = +5V ±10%, V- = 0V ±10%, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
(Note 2)
MAX
UNITS
ANALOG SWITCH
Analog Signal Range
On-Resistance
On-Resistance Match
Between Channels (Note 4)
On-Resistance Flatness
(Notes 3, 5)
NO or NC Off Leakage
Current (Note 9)
VCOM,
VNO,
VNC
(Note 3)
V+ = 4.5V,
ICOM = -10mA,
VNO or VNC = 3.5V
V+ = 5V,
ICOM = -1.0mA,
∆RON
VNO or VNC = 3V
V+ = 5V,
RFLAT(ON) ICOM = -1.0mA,
VNO or VNC = 1V, 3V
RON
INO(OFF)
or
INC(OFF)
V+ = 5.5V,
VCOM = 0V,
VNO or VNC = 4.5V
COM Off Leakage Current
(Note 9)
V+ = 5.5V,
ICOM(OFF) VCOM = 0V,
VNO or VNC = 4.5V
COM On Leakage Current
(Note 9)
ICOM(ON)
V+ = 5.5V,
VCOM = 5V,
VNO or VNC = 4.5V
0
TA = +25°C
V+
30
TA = TMIN to TMAX
75
TA = +25°C
0.8
TA = TMIN to TMAX
2
TA = TMIN to TMAX
TA = TMIN
to TMAX
TA = +25°C
TA = TMIN
to TMAX
C, E
M
TA = +25°C
TA = TMIN
to TMAX
C, E
M
6
8
-0.25
C, E
M
2
4
TA = +25°C
TA = +25°C
60
0.01
V
Ω
Ω
Ω
0.25
-0.1
-2.5
0.1
2.5
-0.1
0.1
-2.5
-5.0
2.5
5.0
-0.2
0.2
-5.0
-20
5.0
20
nA
nA
nA
DYNAMIC
Turn-On Time
tON
VNO or VNC = 3V
Turn-Off Time
tOFF
VNO or VNC = 3V
Break-Before-Make Time
Delay (Note 3)
Charge Injection
(Note 3)
TA = +25°C
85
TA = TMIN to TMAX
TA = +25°C
25
TA = TMIN to TMAX
tD
MAX393 only, RL = 300Ω, CL = 35pF
Q
CL = 1.0nF, VGEN = 0V,
RGEN = 0Ω, Figure 4
Positive Supply Current
I+
V+ = 5.5V, VIN = 0V or V+, all channels on or off
Negative Supply Current
I-
V+ = 5.5V, VIN = 0V or V+, all channels on or off
170
240
50
100
10
TA = +25°C
ns
ns
ns
1
5
pC
-1
1
µA
-1
1
µA
SUPPLY
4
_______________________________________________________________________________________
Precision, Quad, SPST Analog Switches
MAX391/MAX392/MAX393
ELECTRICAL CHARACTERISTICS—Single +3.3V Supply
(V+ = +3.0V to +3.6V, GND = 0V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
ANALOG SWITCH
Analog Signal Range
VCOM,
VNO,
VNC
(Note 3)
RON
V+ = 3V,
ICOM = -1.0mA,
VNO or VNC = 1.5V
Turn-On Time (Note 3)
tON
VNO or VNC = 1.5V
Turn-Off Time (Note 3)
tOFF
VNO or VNC = 1.5V
Channel On-Resistance
0
TA = +25°C
V+
83
TA = TMIN to TMAX
175
275
V
Ω
DYNAMIC
Break-Before-Make Time
Delay (Note 3)
tD
Charge Injection (Note 3)
Q
MAX393 only,
RL = 300Ω, CL = 35pF
CL = 1.0nF,
VGEN = 0V, RGEN = 0V
TA = +25°C
160
TA = TMIN to TMAX
500
TA = +25°C
40
TA = TMIN to TMAX
TA = +25°C
400
125
175
20
TA = +25°C
ns
ns
ns
1
5
pC
SUPPLY
Positive Supply Current
I+
V+ = 3.6V, VIN = 0V or V+, all channels on or off
-1
1
µA
Negative Supply Current
I-
V+ = 3.6V, VIN = 0V or V+, all channels on or off
-1
1
µA
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
Note 8:
Note 9:
The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Guaranteed by design.
∆RON = ∆RON max - ∆RON min.
Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25°C.
Off Isolation = 20log10 [ VCOM ⁄ (VNC or VNO) ], VCOM = output, VNC or VNO = input to off switch.
Between any two switches.
Leakage testing at single supply is guaranteed by testing with dual singles.
_______________________________________________________________________________________
5
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
A:
B:
C:
D:
V+ = +5V,
V- = -5V
35
TA = +125°C
TA = +85°C
TA = +25°C
TA = -55°C
120
MAX391-02
A: V+ = 3V, V- = -3V
B: V+ = 5V, V- = -5V
V- = 0V
100
80
30
RON (Ω)
A
25
20
25
V+ = 3V
RON (Ω)
30
A
B
60
40
20
B
V+ = 5V
C
15
20
15
V+ = 12V
D
10
0
10
-5.0
-2.5
2.5
0
5.0
2.5
0
6
8
10
RON vs. VCOM AND
TEMPERATURE (SINGLE SUPPLY)
OFF LEAKAGE CURRENT vs.
TEMPERATURE
ON LEAKAGE CURRENT vs.
TEMPERATURE
B
20
D
1
0.1
0.01
0.001
0
3
4
+25
-25
VCOM (V)
0.01
+75
+125
-75
CHARGE INJECTION vs. VCOM
SUPPLY CURRENT vs. TEMPERATURE
MAX391-07
10
1
V+ = 5V, V- = -5V
V+ = 5V
V- = 0V
-10
-20
I+, I-, (µA)
10
I+ at V+ = 5.5V
0.1
0.01
I- at V- = -5.5V
0.001
-30
0.0001
-5.0
-2.5
0
VCOM (V)
2.5
5.0
-75
+75
TEMPERATURE (°C)
100
20
0
+25
-25
TEMPERATURE (°C)
30
Q (pC)
0.1
0.0001
-75
5
1
MAX391-08
2
12
0.001
0.0001
1
V+ = 5.5V, V- = -5.5V
VCOM = ±4.5V
10
ON LEAKAGE (nA)
OFF LEAKAGE (nA)
A
C
V+ = 5.5V, V- = -5.5V
VCOM = ±4.5V
VNC OR VNO = ±4.5V
10
100
MAX351-05
100
MAX391-04
V+ = 5V
V- = 0V
TA = +125°C
TA = +85°C
TA = +25°C
TA = -55°C
40
6
4
2
VCOM (V)
60
0
0
5.0
VCOM (V)
A:
B:
C:
D:
80
-2.5
VCOM (V)
120
100
-5.0
MAX391-06
RON (Ω)
40
MAX391-01
40
35
RON vs. VCOM
(SINGLE SUPPLY)
RON vs. VCOM AND
TEMPERATURE (DUAL SUPPLIES)
MAX391-03
RON vs. VCOM
(DUAL SUPPLIES)
RON (Ω)
MAX391/MAX392/MAX393
Precision, Quad, SPST Analog Switches
+25
+125
TEMPERATURE (°C)
_______________________________________________________________________________________
+125
Precision, Quad, SPST Analog Switches
PIN
NAME
FUNCTION
1, 16, 9, 8
IN1–IN4
2, 15, 10, 7
COM1–COM4
3, 14, 11, 6
NO1–NO4
or
NC1–NC4
4
V-
5
GND
Ground
12
N.C.
No Connect—not internally connected
13
V+
Inputs
Analog Switch Common Terminal
Switch Inputs
Negative Supply-Voltage Input
Positive Supply-Voltage Input—connected to substrate
__________Applications Information
POSITIVE SUPPLY
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maximum ratings, because stresses beyond the listed ratings may cause permanent damage to the devices.
Always sequence V+ on first, followed by V-, and then
logic inputs. If power-supply sequencing is not possible, add two small signal diodes in series with supply
pins for overvoltage protection (Figure 1). Adding
diodes reduces the analog signal range to 1V below V+
and 1V below V-, but low switch resistance and low
leakage characteristics are unaffected. Device operation is unchanged, and the difference between V+ and
V- should not exceed 17V.
V+
NO
COM
Vg
VNEGATIVE SUPPLY
Figure 1. Overvoltage Protection Using Two External Blocking
Diodes
_______________________________________________________________________________________
7
MAX391/MAX392/MAX393
______________________________________________________________Pin Description
MAX391/MAX392/MAX393
Precision, Quad, SPST Analog Switches
______________________________________________Test Circuits/Timing Diagrams
+5V
MAX391
MAX392
MAX393
SWITCH
INPUT
SWITCH
OUTPUT
V+
NO
or NC
COM
V COM
VOUT
RL
300Ω
IN
GND
LOGIC
INPUT
LOGIC
INPUT
50%
0V
CL
35pF
t OFF
V-
0V
VOUT
SWITCH
OUTPUT
-5V
0V
0.9 x V0UT
0.9 x VOUT
t ON
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL
VOUT = VCOM
RL + RON
(
t r < 20ns
t f < 20ns
+3V
)
Figure 2. Switching Time
+5V
MAX393
VCOM1 = +3V
VCOM2 = +3V
V+
COM1
NO
RL2
GND
RL1
VOUT2
IN
LOGIC
INPUT
50%
VOUT1
NC
COM2
+3V
LOGIC
INPUT
0V
CL1
SWITCH
OUTPUT 1
(VOUT1)
CL2
0.9 x V0UT1
0V
SWITCH
OUTPUT 2
(VOUT2)
V-5V
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
0.9 x VOUT2
0V
RL = 300Ω
CL = 35pF
tD
tD
Figure 3. Break-Before-Make Interval (MAX393 only)
MAX391
MAX392
MAX393
+5V
∆VOUT
V+
RGEN
VOUT
COM
NC or
NO
VOUT
IN
OFF
CL
V GEN
GND
IN
V-
-5V
VIN = +3V
IN
OFF
ON
ON
OFF
Q = (∆V OUT )(C L )
IN DEPENDS ON SWITCH CONFIGURATION;
INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
Figure 4. Charge Injection
8
OFF
_______________________________________________________________________________________
Precision, Quad, SPST Analog Switches
SIGNAL
GENERATOR 0dBm
MAX391
MAX392
MAX393
+5V
10nF
COM
SIGNAL
GENERATOR 0dBm
V+
0V or
2.4V
IN
MAX391
MAX392
MAX393
+5V
10nF
V+
COM1
N01
IN1
IN2
50Ω
0V or 2.4V
COM
ANALYZER
NC
or NO
GND
GND
10nF
RL
COM2
N02
ANALYZER
V-
0V or 2.4V
-5V
Figure 5. Isolation
Figure 6. Crosstalk
10nF
MAX391
MAX392
MAX393
+5V
10nF
V+
COM
0V or
2.4V
IN
CAPACITANCE
METER
IN
f = 1MHz
NC
or NO
GND
V-
10nF
0V or
2.4V
NC
or NO
GND
-5V
Figure 7. Channel-Off Capacitance
MAX391
MAX392
MAX393
+5V
V+
COM
f = 1MHz
10nF
RL
-5V
CAPACITANCE
METER
NC
V-
V-
10nF
-5V
Figure 8. Channel-On Capacitance
_______________________________________________________________________________________
9
MAX391/MAX392/MAX393
_________________________________Test Circuits/Timing Diagrams (continued)
MAX391/MAX392/MAX393
Precision, Quad, SPST Analog Switches
__Ordering Information (continued)
PART
TEMP. RANGE
___________________Chip Topography
PIN-PACKAGE
MAX391EJE
-40°C to +85°C
16 CERDIP
MAX391MJE
-55°C to +125°C
16 CERDIP**
MAX392CPE
0°C to +70°C
16 Plastic DIP
MAX392CSE
0°C to +70°C
16 Narrow SO
MAX392CUE
MAX392C/D
MAX392EPE
MAX392ESE
MAX392EUE
MAX392EJE
MAX392MJE
MAX393CPE
MAX393CSE
MAX393CUE
MAX393C/D
MAX393EPE
MAX393ESE
MAX393EUE
MAX393EJE
MAX393MJE
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
16 TSSOP
Dice*
16 Plastic DIP
16 Narrow SO
16 TSSOP
16 CERDIP
16 CERDIP**
16 Plastic DIP
16 Narrow SO
16 TSSOP
Dice*
16 Plastic DIP
16 Narrow SO
16 TSSOP
16 CERDIP
16 CERDIP**
"A" COM1 IN1
IN2 COM2 "D"
0.102"
(2.59mm)
V-
V+
GND
"B" COM4 IN4
* Contact factory for dice specifications.
** Contact factory for availability and processing to MIL-STD-883B.
IN3 COM3 "C"
0.067"
(1.70mm)
MAX391
MAX392
PIN
NAME
PIN
NAME
PIN
A
NC1
A
NO1
A
NO1
B
NC4
B
NO4
B
NO4
C
NC3
C
NO3
C
NC3
D
NC2
D
NO2
D
NC2
TRANSISTOR COUNT: 76
SUBSTRATE CONNECTED TO V+
10
MAX393
______________________________________________________________________________________
NAME
Precision, Quad, SPST Analog Switches
TSSOP.EPS
______________________________________________________________________________________
11
MAX391/MAX392/MAX393
________________________________________________________Package Information
___________________________________________Package Information (continued)
SOICN.EPS
MAX391/MAX392/MAX393
Precision, Quad, SPST Analog Switches
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 1999 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
Similar pages