Maxim MAX5027EUT-T 500khz, 36v output, sot23, pwm step-up dc-dc converter Datasheet

19-2239; Rev 2; 3/09
KIT
ATION
EVALU
E
L
B
AVAILA
500kHz, 36V Output, SOT23,
PWM Step-Up DC-DC Converters
The MAX5025–MAX5028 constant-frequency, pulsewidth modulating (PWM), low-noise boost converters
are intended for low-voltage systems that often need a
locally generated high voltage. These devices are
capable of generating low-noise, high output voltages
required for varactor diode biasing in TV tuners, set-top
boxes, and PCI cable modems. The MAX5025–
MAX5028 operate from as low as 3V and switch at
500kHz.
The constant-frequency, current-mode PWM architecture provides for low output noise that is easy to filter. A
40V lateral DMOS device is used as the internal power
switch, making the devices ideal for boost converters
up to 36V. The MAX5025/MAX5026 adjustable versions
require the use of external feedback resistors to set the
output voltage. The MAX5027/MAX5028 offer a fixed
30V output. These devices are available in a small, 6pin SOT23 package.
Applications
Features
♦ Input Voltage Range:
3V to 11V (MAX5026/MAX5028)
4.5V to 11V (MAX5025/MAX5027)
♦ Wide Output Voltage Range: VCC to 36V
♦ Output Power: 120mW (max)
♦ User-Adjustable Output Voltage with
MAX5025/MAX5026 Using External Feedback
Resistors
♦ Fixed 30V Output Voltage: MAX5027/MAX5028
♦ Internal 1.3Ω (typ), 40V Switch
♦ Constant PWM Frequency Provides Easy Filtering
in Low-Noise Applications
♦ 500kHz (typ) Switching Frequency
♦ 1μA (max) Shutdown Current
♦ Small, 6-Pin SOT23 Package
TV Tuner Power Supply
Low-Noise Varactor Diode Biasing
Ordering Information
Set-Top Box Tuner Power Supply
PART
PCI Cable Modem
Voice-Over-Cable
TEMP RANGE
PIN-PACKAGE
MAX5025EUT-T
-40°C to +85°C
6 SOT23-6
MAX5026EUT-T
-40°C to +85°C
6 SOT23-6
LCD Power Supply
MAX5027EUT-T
-40°C to +85°C
6 SOT23-6
Avalanche Photodiode Biasing
MAX5028EUT-T
-40°C to +85°C
6 SOT23-6
Typical Operating Circuit
Selector Guide appears at end of data sheet.
VCC = 4.5V TO 11V
(MAX5027)
VCC = 3V TO 11V
(MAX5028)
L1
D1
LX
VCC
TOP VIEW
MAX5027
MAX5028
SHDN
FB
C1
Pin Configuration
VOUT
30V
C2
PGND 1
PGND
GND 2
MAX5025–
MAX5028
6
LX
5
VCC
4
SHDN
GND
FB 3
SOT23-6
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX5025–MAX5028
General Description
MAX5025–MAX5028
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
ABSOLUTE MAXIMUM RATINGS
VCC to GND ............................................................-0.3V to +12V
PGND to GND .......................................................-0.1V to +0.1V
FB to GND (MAX5025/MAX5026)...............-0.3V to (VCC + 0.3V)
FB to GND (MAX5027/MAX5028)...........................-0.3V to +40V
SHDN to GND.............................................-0.3V to (VCC + 0.3V)
LX to GND ..............................................................-0.3V to +45V
Peak LX Current ................................................................600mA
Operating Temperature Range ...........................-40°C to +85°C
Continuous Power Dissipation (TA = +70°C)
6-Pin SOT23 (derate 8.7mW/°C above +70°C)..........695.7mW
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +165°C
Lead Temperature (soldering 10s) ..................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = 5V, SHDN = VCC, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
SUPPLY VOLTAGE
Input Voltage Range
Undervoltage Lockout
Supply Current
Shutdown Current
VCC
VUVLO
ICC
ISHDN
MAX5026/MAX5028
3.0
11
MAX5025/MAX5027
4.5
11
Rise/fall, hysteresis = 3mV
2.25
V
2.65
2.95
V
MAX5025/MAX5026, FB = 1.4V
MAX5027/MAX5028, FB = 35V
350
1000
µA
SHDN = GND
0.01
1
µA
BOOST CONVERTER
Switching Frequency
fSW
MAX5025/MAX5027
345
500
1000
MAX5026/MAX5028, VCC = 3.3V
410
500
670
MAX5025/MAX5027,
ILOAD = 2mA, VCC = 4.5V to 11V,
VOUT = 30V
0.25
Line Regulation
%/V
MAX5026/MAX5028,
ILOAD = 0.5mA, VCC = 3V to 11V,
VOUT = 30V
0.25
MAX5025/MAX5027,
VCC = 5V, ILOAD = 0 to 4mA,
VOUT = 30V
2.0
%
Load Regulation
MAX5026/MAX5028,
VCC = 3.3V, ILOAD = 0 to 1mA,
VOUT = 30V
Thermal Shutdown
Thermal Shutdown Hysteresis
2
kHz
1.0
140
°C
2
°C
_______________________________________________________________________________________
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
MAX5025–MAX5028
ELECTRICAL CHARACTERISTICS (continued)
(VCC = 5V, SHDN = VCC, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1)
PARAMETER
FB Set Point
SYMBOL
VFB
FB Input Bias Current
IFB
Output Voltage
Adjustment Range
CONDITIONS
MIN
TYP
MAX
MAX5025, VCC = 4.5V to 11V
1.19
1.25
1.31
MAX5027, VCC = 4.5V to 11V
28.5
30.0
31.5
MAX5026, VCC = 3.3V to 11V
1.212
1.25
1.288
MAX5028, VCC = 3.3V to 11V
29.0
UNITS
V
30
31
MAX5025/MAX5026, FB = 1V
110
310
nA
MAX5027/MAX5028, FB = 30V
100
170
µA
36
V
VCC + 1
MAX5025/MAX5026
LX OUTPUT
LX On-Resistance
RON
ILX = 40mA
Switch Current Limit
ILIM
Note 2
MAX5026/MAX5028,
VCC = 3V
2.0
4.0
VCC = 5V
1.3
3.0
1.0
2.5
VCC = 11V
LX Leakage Current
VLX = 40V
260
MAX5025/MAX5026,
VFB = 1.4V
0.01
Ω
mA
10
µA
0.8
V
MAX5027/MAX5028,
VFB = 35V
LOGIC INPUT: SHDN
Input Low Level
VIL
Input High Level
VIH
Input Bias Current
2.4
-1
V
1
µA
Note 1: All devices are 100% production tested at TA = +25°C. All temperature limits are guaranteed by design.
Note 2: Switch current-limit accuracy is typically ±20% and is a function of the input voltage. ILIM = (VIN/5) (260mA).
_______________________________________________________________________________________
3
Typical Operating Characteristics
(VCC = 5V, VOUT = 30V, TA = +25°C, unless otherwise noted.)
EFFICIENCY vs. LOAD CURRENT
(VOUT = 12V)
40
MAX5026
VCC = 5V,
VOUT = 12V
CIRCUIT OF FIGURE 2.
R1 = 147kΩ, R2 = 16.2kΩ
30
20
10
80
70
40
MAX5026
VCC = 5V,
VOUT = 12V
CIRCUIT OF FIGURE 2.
R1 = 147kΩ, R2 = 13kΩ
30
10
60
2
4
6
8
10
MAX5026
VCC = 5V,
VOUT = 24V
CIRCUIT OF FIGURE 2.
R1 = 147kΩ, R2 = 8.07kΩ
10
0
0
2
4
6
8
0
1
2
3
4
5
LOAD CURRENT (mA)
EFFICIENCY vs. LOAD CURRENT
(VOUT = 30V)
MAX5026 MINIMUM STARTUP VOLTAGE
vs. LOAD CURRENT
MAX5026/MAX5028
SUPPLY CURRENT vs. SUPPLY VOLTAGE
MAX5026
VCC = 5V,
VOUT = 30V
CIRCUIT OF FIGURE 2.
R1 = 147kΩ, R2 = 6.34kΩ
10
2
3
2.5
2.0
1.5
400
350
300
250
200
150
100
0.5
50
0
0
0
4
MAX5025-28 toc06
450
1.0
0
1
3.0
500
SUPPLY CURRENT (μA)
30
20
3.5
STARTUP VOLTAGE (V)
40
MAX5025-28 toc05
4.0
MAX5025-28 toc04
50
1
2
3
4
CURRENT INTO VCC PIN
DEVICE NOT SWITCHING
0
3
6
9
12
LOAD CURRENT (mA)
SUPPLY VOLTAGE (V)
MAX5026
NO LOAD SUPPLY CURRENT
vs. SUPPLY VOLTAGE
SUPPLY CURRENT vs. TEMPERATURE
MAX5026
SWITCHING FREQUENCY vs. TEMPERATURE
8
6
4
VCC = 11V
750
VCC = 9V
650
VCC = 7V
550
VCC = 5V
450
VCC = 3V
350
250
2
CURRENT INTO VCC PIN
150
0
5
7
SUPPLY VOLTAGE (V)
9
11
650
VCC = 5V
VOUT = 30V
CIRCUIT OF FIGURE 2.
600
SWITCHING FREQUENCY (kHz)
10
MAX5025-28 toc08
12
850
SUPPLY CURRENT (μA)
MAX5025-28 toc07
CIRCUIT OF FIGURE 2
VOUT = 30V
550
500
450
400
350
300
250
200
-40
-20
0
20
40
TEMPERATURE (°C)
60
80
-40
-20
0
20
40
TEMPERATURE (°C)
_______________________________________________________________________________________
60
80
MAX5025-28 toc09
LOAD CURRENT (mA)
16
3
30
LOAD CURRENT (mA)
60
14
40
LOAD CURRENT (mA)
70
0
50
20
0
0
EFFICIENCY (%)
50
20
0
4
60
70
EFFICIENCY (%)
50
80
MAX5025-28 toc03
90
EFFICIENCY (%)
60
EFFICIENCY vs. LOAD CURRENT
(VOUT = 24V)
MAX5025-28 toc02
70
EFFICIENCY (%)
EFFICIENCY vs. LOAD CURRENT
(VOUT = 15V)
MAX5025-28 toc01
90
80
NO LOAD SUPPLY CURRENT (mA)
MAX5025–MAX5028
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
EXITING SHUTDOWN
ENTERING SHUTDOWN
MAX5025-28 toc10
OUTPUT
VOLTAGE
20V/div
MAX5025-28 toc11
30V
30V
5V
INDUCTOR
CURRENT
50mA/div
5V
OUTPUT
VOLTAGE
20V/div
5V
SHUTDOWN
VOLTAGE
5V/div
5V
0V
SHUTDOWN
VOLTAGE
5V/div
2ms/div
100ms/div
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 1mA.
CIRCUIT OF FIGURE 3
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 1mA.
CIRCUIT OF FIGURE 3
LIGHT-LOAD SWITCHING WAVEFORM
WITHOUT RC FILTER
LIGHT-LOAD SWITCHING WAVEFORM
WITH RC FILTER
MAX5025-28 toc12
MAX5025-28 toc13
VOUT
2mV/div
AC-COUPLED
VOUT
1mV/div
AC-COUPLED
LX PIN
20V/div
LX PIN
20V/div
0V
IL
100mA/div
0mA
0V
IL
100mA/div
1μs/div
0mA
1μs/div
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 0.1mA.
CIRCUIT OF FIGURE 2
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 0.1mA.
CIRCUIT OF FIGURE 3
MEDIUM-LOAD SWITCHING WAVEFORM
WITHOUT RC FILTER
MEDIUM-LOAD SWITCHING WAVEFORM
WITH RC FILTER
MAX5025-28 toc15
MAX5025-28 toc14
VOUT
5mV/div
AC-COUPLED
VOUT
1mV/div
AC-COUPLED
LX PIN
20V/div
LX PIN
20V/div
0V
0V
IL
200mA/div
0mA
1μs/div
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 2mA.
CIRCUIT OF FIGURE 2
IL
200mA/div
0mA
1μs/div
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 2mA.
CIRCUIT OF FIGURE 3
_______________________________________________________________________________________
5
MAX5025–MAX5028
Typical Operating Characteristics (continued)
(VCC = 5V, VOUT = 30V, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(VCC = 5V, VOUT = 30V, TA = +25°C, unless otherwise noted.)
HEAVY-LOAD SWITCHING WAVEFORM
WITHOUT RC FILTER
HEAVY-LOAD SWITCHING WAVEFORM
WITH RC FILTER
MAX5025-28 toc16
MAX5025-28 toc17
VOUT
5mV/div
AC-COUPLED
VOUT
1mV/div
AC-COUPLED
LX PIN
20V/div
LX PIN
20V/div
0V
IL
200mA/div
0mA
0V
IL
200mA/div
0mA
1μs/div
1μs/div
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 4mA.
CIRCUIT OF FIGURE 2
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 4mA.
CIRCUIT OF FIGURE 3
LOAD TRANSIENT RESPONSE
LINE TRANSIENT RESPONSE
MAX5025-28 toc18
MAX5025-28 toc19
OUTPUT
VOLTAGE
200mV/div
AC-COUPLED
OUTPUT
VOLTAGE
1mV/div
AC-COUPLED
0mV
LOAD
CURRENT
10mA/div
0mA
0mV
INPUT
VOLTAGE
100mV/div
AC-COUPLED
0mV
1ms/div
2ms/div
MAX5026, VCC = 5V, VOUT = 30V, ILOAD = 0 TO 4mA.
CIRCUIT OF FIGURE 2
MAX5026, VCC = 5V TO 5.2V, VOUT = 30V, ILOAD = 1mA.
CIRCUIT OF FIGURE 2
MAX5028
FB PIN VOLTAGE vs. TEMPERATURE
MAX5025-28 toc20
1.270
1.265
VCC = 11V
VCC = 5V
1.255
1.250
VCC = 3V
1.245
30.2
VCC = 11V
30.0
29.8
VCC = 5V
29.6
1.240
29.4
1.235
29.2
1.230
VCC = 3V
29.0
-40
6
30.4
FB PIN VOLTAGE (V)
1.260
MAX5025-28 toc21
MAX5026
FB PIN VOLTAGE vs. TEMPERATURE
FB PIN VOLTAGE (V)
MAX5025–MAX5028
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
-20
0
20
40
TEMPERATURE (°C)
60
80
-40
-20
0
20
40
TEMPERATURE (°C)
_______________________________________________________________________________________
60
80
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
SWITCH ON-RESISTANCE
vs. TEMPERATURE
LX LEAKAGE CURRENT vs. TEMPERATURE
2.5
2.0
VCC = 5V
1.5
0.040
0.035
0.030
0.025
0.020
0.015
0.010
1.0
0.005
VCC = 11V
0
0.5
0
20
40
60
0
20
40
60
TEMPERATURE (°C)
LOAD REGULATION
MAX5026
MAXIMUM LOAD CURRENT
vs. INPUT VOLTAGE
MAX5026
VCC = 5V
WITHOUT RC FILTER
(CIRCUIT OF FIGURE 2)
30
WITH RC FILTER
(CIRCUIT OF FIGURE 3)
29
-20
TEMPERATURE (°C)
32
31
-40
80
28
80
100
MAXIMUM LOAD CURRENT (mA)
-20
MAX5025-28 toc24
-40
OUTPUT VOLTAGE (V)
CURRENT INTO LX PIN
VLX = 40V
0.045
MAX5025-28 toc25
RON (Ω)
VCC = 3V
MAX5025-28 toc23
MAX5026
0.050
LX LEAKAGE CURRENT (μA)
MAX5025-28 toc22
3.0
A
B
10
C
D
E
A: VOUT = 12V
B: VOUT = 24V
C: VOUT = 30V
D: VOUT = 32V
E: VOUT = 36V
1
0.1
0
1
2
3
LOAD CURRENT (mA)
4
5
3
5
7
9
11
INPUT VOLTAGE (V)
_______________________________________________________________________________________
7
MAX5025–MAX5028
Typical Operating Characteristics (continued)
(VCC = 5V, VOUT = 30V, TA = +25°C, unless otherwise noted.)
MAX5025–MAX5028
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
Pin Description
PIN
MAX5025/
MAX5026
MAX5027/
MAX5028
NAME
FUNCTION
1
1
PGND
Power Ground. Connect directly to local ground plane. Use a star ground configuration
for low noise.
2
2
GND
Ground. Connect directly to local ground plane.
3
—
FB
Feedback Pin. Reference voltage is approximately 1.25V. Connect resistive-divider tap
here. Minimize trace area at FB. See Setting the Output Voltage section.
—
3
FB
Feedback Pin. Connect VOUT to FB for +30V. Internal resistors divide down the output
voltage.
4
4
SHDN
5
5
VCC
6
6
LX
Shutdown Pin. Connect to VCC to enable device. Connect to GND to shut down.
Input Supply Voltage. Bypass with a 4.7µF ceramic capacitor.
Drain of Internal 40V N-Channel DMOS. Connect inductor/diode to LX. Minimize trace
area at this pin to keep EMI down.
Detailed Description
The MAX5025–MAX5028 current-mode PWM controllers operate in a wide range of DC-DC conversion
applications including boost, flyback, and isolated output configurations. These converters provide lownoise, high output voltages making them ideal for varactor diode tuning applications as well as TFT LCD
bias. Other features include shutdown, fixed 500kHz
PWM oscillator, and a wide input range: 3V to 11V for
MAX5026/MAX5028 and 4.5V to 11V for MAX5025/
MAX5027.
The MAX5025–MAX5028 operate in discontinuous
mode in order to reduce the switching noise at the output. Other continuous mode boost converters generate
a large voltage spike at the output when the LX switch
turns on because there is a conduction path between
the output, diode, and switch to ground during the time
needed for the diode to turn off.
To reduce the output noise even further, the LX switch
turns off by taking 40ns typically to transition from “ON”
to “OFF.” As a consequence, the positive slew rate of
the LX node is reduced and the current from the inductor does not “force” the output voltage as hard as
would be the case if the LX switch were to turn off more
quickly.
PWM Controller
The heart of the MAX5025–MAX5028 current-mode
PWM controllers is a BiCMOS multi-input comparator
that simultaneously processes the output-error signal
and switch current signal. The main PWM comparator
8
is direct summing, lacking a traditional error amplifier
and its associated phase shift. The direct summing
configuration approaches ideal cycle-by-cycle control
over the output voltage since there is no conventional
error amp in the feedback path.
The device operates in PWM mode using a fixed-frequency, current-mode operation. The current-mode
feedback loop regulates peak inductor current as a
function of the output error signal.
SHDN Input
The SHDN pin provides shutdown control. Connect
SHDN to V CC for normal operation. To disable the
device, connect SHDN to GND.
Design Procedure
The MAX5025–MAX5028 can operate in a number of
DC-DC converter configurations including step-up, single-ended primary inductance converter (SEPIC), and
flyback. The following design discussions are limited to
step-up, with a complete circuit shown in the
Application Circuits section.
Setting the Output Voltage
The output voltage of the MAX5027/MAX5028 is fixed
at 30V. The output voltage of the MAX5025/MAX5026 is
set by two external resistors (R1 and R2, Figure 2 and
Figure 3). First select the value of R2 in the 5kΩ to
50kΩ range. R1 is then given by:
_______________________________________________________________________________________
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
ULVO
3
FB
-A
OSCILLATOR
MAIN PWM
COMPARATOR
SHDN
4
LX
6
PGND
1
CONTROL
LOGIC
+A
REF
THERMAL
SHUTDOWN
+C
2
GND
5
VCC
-C
CURRENTLIMIT
COMPARATOR
N
L =
MAX5025
MAX5026
Figure 1. Functional Diagram
Use the following formula to calculate the upper bound
of the inductor value at different output voltages and
output currents. This is the maximum inductance value
for discontinuous mode operation.
LUPPER =
⎛V
⎞
R1 = R2 ⎜ OUT - 1⎟
⎝ VREF ⎠
where VREF is 1.25V
Determining Peak Inductor Current
If the boost converter remains in the discontinuous
mode of operation, then the approximate peak inductor
current, ILPEAK, is represented by the formula below:
ILPEAK =
2 TS ( VOUT − VIN ) IOUT
ηL
where TS is the period, VOUT is the output voltage, VIN
is the input voltage, IOUT is the output current, and η is
the efficiency of the boost converter.
(47μH) (VOUT − VIN )
(25V)
2
VIN
(VOUT − VIN ) TSη
2
2 IOUT VOUT
Calculate the lower bound, LLOWER, for the acceptable
inductance value using the following formula, which will
allow the maximum output current to be delivered without reaching the peak current limit:
LLOWER =
2 TS ( VOUT − VIN ) IOUT
⎛V
⎞
η ⎜ IN (260mA)⎟
⎝ 5
⎠
2
Notice that the switch current limit, (VIN/5)(260mA), is a
function of the input voltage, VIN. The current rating of
the inductor should be greater than the switch current
limit.
Table 1. Inductor Vendors
VENDOR
PHONE
FAX
PART NUMBER OF 47µH INDUCTOR
Coilcraft
847-639-6400
847-639-1469
DT1608C-473
Sumida
847-545-6700
847-545-6720
CDRH4D28-470
Toko
847-297-0070
847-699-7864
A915BY-470M
_______________________________________________________________________________________
9
MAX5025–MAX5028
Determining the Inductor Value
47µH is the recommended inductor value when the output voltage is 30V and the input voltage is 5V. In general, the inductor should have a current rating greater
than the current-limit value. For example, the inductor’s
current rating should be greater than 150mA to support
a 4mA output current. Equivalent series resistance
(ESR) should be below 1Ω for reasonable efficiency.
Due to the MAX5025–MAX5028’s high switching frequency, inductors with a ferrite core or equivalent are
recommended. Powdered iron cores are not recommended due to their high losses at frequencies over
500kHz. Table 1 shows a list of vendors and 47µH
inductor parts.
For 4mA output current and output voltages other than
30V, the inductor can be simply scaled in value
according to the following formula:
MAX5025–MAX5028
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
Capacitor Selection
For a design in which VIN = 5V, VOUT = 30V, IOUT =
4mA, η = 0.5, and TS = 2µs,
LUPPER = 87µH
Output Filter Capacitor
The output filter capacitor should be 1µF or greater. To
achieve low output ripple, a capacitor with low ESR, low
ESL, and high capacitance value should be selected.
For very low output ripple applications, the output of the
boost converter can be followed by an RC filter to further reduce the ripple. Figure 3 shows a 100Ω, 1µF filter used to reduce the switching output ripple to
1mVp-p.
X7R ceramic capacitors are better for this boost application because of their low ESR and tighter tolerance
over temperature than the Y5V ceramic capacitors.
Table 3 below lists manufacturers of recommended
capacitors.
and
LLOWER = 12µH.
For a worst-case scenario in which VIN = 4.75V, VOUT
= 29V, IOUT = 4.4mA, η = 0.5, and TS = 1.25µs,
LUPPER = 46µH
and
LLOWER = 9µH.
The choice of 47µH as the recommended inductance
value is reasonable given the worst-case scenario
above. In general, the higher the inductance, the lower
the switching noise. Load regulation is also better with
higher inductance.
Input Capacitor
Bypass VCC with a 4.7µF ceramic capacitor as close to
the IC as is practical.
Diode Selection
The MAX5025–MAX5028’s high switching frequency
demands a high-speed rectifier. Schottky diodes are
recommended for most applications because of their
fast recovery time and low forward-voltage drop.
Ensure that the diode’s peak current rating is greater
than or equal to the peak inductor current. Also, the
diode reverse breakdown voltage must be greater than
VOUT. Table 2 lists diode vendors.
Applications Information
Layout Considerations
The MAX5025–MAX5028 switch at high speed, mandating careful attention to layout for optimum performance. Protect sensitive analog grounds by using a
star ground configuration. Minimize ground noise by
connecting GND, PGND, the input bypass-capacitor
ground lead, and the output-filter ground lead to a single point (star ground configuration). Also, minimize
Table 2. Schottky Diode Vendors
VENDOR
PHONE
FAX
PART NUMBERS
Comchip
510-657-8671
510-657-8921
CDBS1045
Panasonic
408-942-2912
408-946-9063
MA2Z785
ST-Microelectronics
602-485-6100
602-486-6102
TMMBAT48
Vishay-Telefunken
402-563-6866
402-563-6296
BAS382
Zetex
631-360-2222
631-360-8222
ZHCS500
Table 3. Capacitor Table
COMPANY
PHONE
FAX
Murata
814-237-1431
814-238-0490
Taiyo Yuden
408-573-4150
408-573-4159
TDK
10
847-803-6100
847-803-6296
PART NUMBERS
GRM42-2X7R105K050AD (1µF capacitor)
GRM32-1210R71C475R (4.7µF capacitor)
UMK325BJ105KH (1µF capacitor)
EMK316BJ475ML (4.7µF capacitor)
C3225X7R1H155K (1.5µF capacitor)
C3225X7R1H105K (1µF capacitor)
______________________________________________________________________________________
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
Figures 2 and 3 show the MAX5025/MAX5026 operating in a 30V boost application. Figure 3 has an RC filter
to reduce noise at the output. These circuits provide
output currents greater than 4mA with an input voltage
of 5V or greater. They are designed by following the
Design Procedure section. Operating characteristics of
these circuits are shown in the Typical Operating
Characteristics section.
Inductor Layout
The shielded drum type inductors have a small air gap
around the top and bottom periphery. The incident fringing magnetic field from this air gap to the copper plane
on the PC board tends to reduce efficiency. This is a
result of the induced eddy currents on the copper plane.
To minimize this effect, avoid laying out any copper
planes under the mounting area of these inductors.
VCC = 4.5V TO 11V
(MAX5025)
VCC = 3V TO 11V
(MAX5026)
VCC
C1
4.7μF
L1 TOKO 47μH INDUCTOR
47μH A915BY-470M
ZETEX SCHOTTKY DIODE
D1 ZHCS500
VOUT
LX
+30V
R1
147kΩ
MAX5025
MAX5026
SHDN
FB
C2
1μF
R2
6.34kΩ
PGND GND
Figure 2. Adjustable 30V Output Circuit
VCC = 4.5V TO 11V
(MAX5025)
VCC = 3V TO 11V
(MAX5026)
VCC
C1
4.7μF
L1 TOKO 47μH INDUCTOR
47μH A915BY-470M
ZETEX SCHOTTKY DIODE R3
100Ω
D1 ZHCS500
LX
MAX5025
MAX5026
SHDN
FB
PGND GND
VOUT
+30V
R1
147kΩ
C2
1μF
C3
1μF
R2
6.34kΩ
Figure 3. Adjustable 30V Output Circuit with RC Filter
______________________________________________________________________________________
11
MAX5025–MAX5028
30V Boost Application Circuit
trace lengths to reduce stray capacitance, trace resistance, and radiated noise. The trace between the output voltage-divider (MAX5025/MAX5026) and the FB
pin must be kept short, as well as the trace between
GND and PGND.
MAX5025–MAX5028
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
Selector Guide
PART
OUTPUT
FREQUENCY
TOLERANCE
FB SET POINT
TOLERANCE
INPUT VOLTAGE
MAX5025
Adjustable
-31% to +100%
±5%
4.5V to 11V
MAX5026
Adjustable
-18% to +34%
±3%
3V to 11V
MAX5027
Fixed 30V
-31% to +100%
±5%
4.5V to 11V
MAX5028
Fixed 30V
-18% to +34%
±3%
3V to 11V
Package Information
____________________Chip Information
TRANSISTOR COUNT: 365
PROCESS: BiCMOS
12
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages.
PACKAGE TYPE
PACKAGE CODE
DOCUMENT NO.
6 SOT23
S8-2
21-0058
______________________________________________________________________________________
500kHz, 36V Output, SOT23,
Step-Up DC-DC Converters
REVISION
NUMBER
REVISION
DATE
DESCRIPTION
PAGES
CHANGED
0
10/01
Initial release
—
1
12/01
Released the MAX5027
1
2
3/09
Revised the Absolute Maximum Ratings section.
2
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13
© 2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX5025–MAX5028
Revision History
Similar pages