TECHNICAL DATA SHEET FLOATING ADAPTOR RPC-3.50 JACK – 7/16 PLUG 03K760-S22N3 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface RPC-3.50 side according to IEC 60169-23 RPC-3.50 side mechanically compatible with RPC-2.92 and SMA 7/16 side according to IEC 60169-4, VG 95250, CECC 22190, DIN 47223 Documents N/A Material and plating RF_35/08.06/4.0 Connector parts Center contact Outer contact RPC-3.50 side Outer contact 7/16 side Flange Dielectric 1 Dielectric 2 Material Beryllium copper Stainless steel Brass Brass PP PTFE Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Plating Gold, min. 0.8 µm, over chemical nickel Passivated Silver, 3-6 µm Flash white bronze over silver(e.g. Optargen®) Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: [email protected] Page 1/2 TECHNICAL DATA SHEET FLOATING ADAPTOR RPC-3.50 JACK – 7/16 PLUG 03K760-S22N3 Electrical data Impedance Frequency Return loss Return loss 50 Ω DC to 8 GHz ≥ 32 dB, DC to 2.5 GHz ≥ 25 dB, 2.5 GHz to 8 GHz Insertion loss Insulation resistance Center contact resistance RPC-3.50 Outer contact resistance RPC-3.50 Center contact resistance 7/16 Outer contact resistance 7/16 Test voltage Working voltage ≤ 0.05 x f(GHz) ≥ 5 GΩ ≤ 3.0 mΩ ≤ 2.0 mΩ ≤ 0.4 mΩ ≤ 1.5 mΩ 1000 V rms 335 V rms dB Mechanical data Mating cycles RPC-3.50 Mating cycles 7/16 Center contact captivation Coupling test torque RPC-3.50 Recommended torque RPC-3.50 Misalignment: radial Spring force Spring travel ≥ 500 ≥ 500 ≥ 27 N 1.70 Nm 0.80 Nm to 1.10 Nm 0.55 mm min. min. 33 N at rest max. 62 N at max. spring travel 7 mm max. Environmental data Temperature range Thermal shock Corrosion Vibration Shock Moisture resistance 2002/95/EC (RoHS) -40°C to +85°C MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method compliant 107, 101, 204, 213, 106 Condition Condition Condition Condition B B D I Tooling N/A Suitable cables N/A Packing Standard Weight 1 pce in box 111 g/pce RF_35/08.06/4.0 While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date Armin Maiwälder 19/04/05 Martin Moder 20/08/12 d00 12-0192 Georg Schiele 20/08/12 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: [email protected] Page 2/2