MA-COM MABA-010655-CF1A40-V3 Available on tape and reel Datasheet

MABA-010655-CF1A40
Transformer, 10/100BASE-T Ethernet Transformer
1 MHz - 100 MHz
Rev. V3
Features






Surface mount
100 Ohm bal-bal, 1:1 Impedance ratio
Product suited for both RX and TX channel
260°C reflow compatible
RoHS* compliant and lead free
Available on tape and reel
Description
M/A-Com Technology Solutions MABA-010655CF1A40 is a 10/100BASE-T Ethernet Transformer in
a low cost, surface mount package.
Electrical Specifications: TA = 25°C, 0dBm, Z0 = 50Ω, Pin = 0dBm
Parameter
Frequency
Units
Min
Typ
Max
Insertion Loss (Sdd21)
1 - 3 MHz
3 - 10 MHz
10 - 65 MHz
65 - 100 MHz
dB
dB
dB
dB
-0.25
-0.5
-0.5
-0.6
-0.20
-0.20
-0.30
-0.43
-
Return Loss (Sdd11 and Sdd22)
1 - 100 MHz
dB
-
-30
-20
Differential to Common
Mode Rejection (Scd21)
1 - 100 MHz
dB
-
-37
-35
DC Resistance Balance
N/A
%
-
1.5
3.5
Schematic
Pin Configuration
Pin no.
Function
1
Primary Dot
2
Ground
3
Primary
4
Secondary
5
Ground
6
Secondary Dot
To Network
To PHY
Note: Solderable area is underside of the carrier.
Castellations will not show solder wetting
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MABA-010655-CF1A40
Transformer, 10/100BASE-T Ethernet Transformer
1 MHz - 100 MHz
Rev. V3
Return Loss: Input (Sdd11)
0
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1.0
-10
-20
dB
dB
Insertion Loss: (Sdd21)
-30
-40
-50
-60
-70
1
12
23
34
45
56
67
78
89 100
1
12
23
Frequency (MHz)
-10
-30
dB
dB
-20
-40
-50
-60
-70
23
34
45
56
56
67
78
89
100
Return Loss: Output (Sdd22)
0
12
45
Frequency (MHz)
Differential to Common Mode
Rejection (Scd21)
1
34
67
78
Frequency (MHz)
89 100
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
1
12
23
34
45
56
67
78
89 100
Frequency (MHz)
Electrical Specifications: Z0 = 50Ω, TA = 25°C, Pin = 0dBm
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MABA-010655-CF1A40
Transformer, 10/100BASE-T Ethernet Transformer
1 MHz - 100 MHz
Rev. V3
Outline Drawing
1.
2.
3.
4.
Dimensions in mm.
Tolerance: ±0.2mm unless otherwise noted.
Model number and lot code printed on reel.
Plating finish: ENIG on both sides, 0.05 to 0.1 µm gold over 3 to 6 µm nickel
Application Circuit
Recommended Footprint
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MABA-010655-CF1A40
Transformer, 10/100BASE-T Ethernet Transformer
1 MHz - 100 MHz
Tape & Reel Information
Rev. V3
Ordering Information
Parameter
Units
Value
Part Number
Description
Qty per reel
-
900
MABA-010655-CF1A40
Tape & Reel
Reel Size
mm
330
MABA-010655-CF1ATB
Customer Evaluation Board
Tape Width
mm
16.00
Pitch
mm
8.00
Ao
mm
5.70
Bo
mm
7.00
Ko
mm
4.20
Orientation
-
F46
Reference Application Note ANI-019 for orientation
Recommended Maximum Ratings
Parameter
Value
Input power
250mW
DC current
600mA
Hi Pot
1500 Vrms
Operating Temperature
-40°C to +110°C
Storage Temperature
-55°C to +100°C
Temperature data available on request
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages