Fujitsu FTR-K1AL005WLBBG Power relay 1 pole - 10a high sensitivity Datasheet

FTR-K1 SERIES
POWER RELAY
1 POLE - 10A High Sensitivity
RoHS compliant
FTR-K1 Series
n FEATURES
l
l
l
l
l
l
l
l
l
Low profile (height: 15.7mm)
HIGH ISOLATION
Insulation Distance (between coil and contacts): 10mm min.
Dielectric strength: 5KV
Surge strength: 10KV
UL F Class wire
Low coil power (400mW)
Cadmium free contacts
SAFETY STANDARDS
UL, CSA, VDE, SEMKO approved
UL, CSA TV-5 rating approved (1 form A type)
RoHS Compliant
UL F class isolation
VDE Glow-wire ignitablility test 775 (IEC60335-1) approved
n ORDERING INFORMATION
[Example]
FTR-K1
(a)
A
(b)
L
(c)
005
(d)
W
(e)
LA
(f )
(– BG) (g)
(a)
Series Name
FTR-K1 : FTR-K1 Series
(b)
Contact Arrangement
A
: 1 form A (SPST-NO)
(c)
Coil Type / Enclosure
L
: High sensitivity (200 mW) / flux free
(d)
Nominal Voltage
005
018
: 5 VDC,
: 18 VDC
(e)
Contact Material / TV type
W
: AgSnO2
(f)
Terminal Pitch
LA
LB
: 10A high sensitive (250 mW) 3.5mm pitch
: 10A high sensitive (250 mW) 5.0mm pitch
(f)
Special Designation
BG
: Gold plated ; 3µm
006 : 6VDC,
024 : 24VDC,
009 : 9VDC
048 : 48VDC
012 : 12VDC
Actual marking does not carry the type name : "FTR"
E.g.: Ordering code: FTR-K1AL012WLA
Actual marking: K1AL012WLA
FTR-K1 SERIES
n PART NUMBERS
250mW type
Ordering Part Number
Series
Contact
Coil Power
Coil
Voltage
FTR-K1AL005W-LA-(BG)
5
FTR-K1AL006W-LA-(BG)
6
FTR-K1AL009W-LA-(BG)
9
FTR-K1AL012W-LA-(BG)
12
FTR-K1AL018W-LA-(BG)
18
FTR-K1AL024W-LA-(BG)
24
FTR-K1AL048W-LA-(BG)
FTR-K1AL005W-LB-(BG)
FTR-K1
A: 1 form A
L: 250 mW
48
5
FTR-K1AL006W-LB-(BG)
6
FTR-K1AL009W-LB-(BG)
9
FTR-K1AL012W-LB-(BG)
12
FTR-K1AL018W-LB-(BG)
18
FTR-K1AL024W-LB-(BG)
24
FTR-K1AL048W-LB-(BG)
48
Contact
Material
Terminal
Pitch
Special
LA: 10A
3.5mm
pitch
W: AgSnO2
BG: Gold
plated
LB: 10A
5.0mm
pitch
n COIL DATA CHART
Coil
Voltage
Nominal
Voltage
(VDC)
Max. Coil
Voltage*1
Coil
Resistance
(±10%)
Must Operate
Voltage*2
Must
Release Voltage*2
005
5
15.0 VDC
100 Ω
3.75 VDC
0.5 VDC
006
6
18.0 VDC
145 Ω
4.5 VDC
0.6 VDC
009
9
27.0 VDC
325 Ω
6.75 VDC
0.9 VDC
012
12
36.0 VDC
575 Ω
9.0 VDC
1.2 VDC
018
18
54.0 VDC
1,300 Ω
13.5 VDC
1.8 VDC
024
24
72.0 VDC
2,310 Ω
18.0 VDC
2.4 VDC
048
48
144.0 VDC
9,216 Ω
36.0 VDC
4.8 VDC
Nominal Power
(mW)
250
Note: All values in the table are measured at 20°C.
*1: No contact current at 20°C
*2: Specified values are subject to pulse wave voltage
FTR-K1 SERIES
n SPECIFICATIONS
Item
FTR-K1 AL ( ) W- (LA, LB)
Contact Arrangement
1 form A
Material
Coil
AgSnO2
Resistance (initial)
Maximum 100 mΩ at 1 A, 6 VDC
Rating
10 A, 250 VAC
Maximum Carrying Current*1
10 A
Maximum Switching Rating
2,500VA
Maximum Switching Voltage
440 VAC
Minimum Switching Load*2
10 mA 5 VDC
Nominal Power (at 20ºC)
250mW
Operate Power (at 20ºC)
141 mW
Operating Temperature
-40ºC to +85ºC (no frost), (LB: -40ºC to +105ºC)
Time
Value
Operate (without diode)
Maximum 15ms (at nominal voltage, no bounce)
Release (without diode)
Maximum 5ms (at nominal voltage, no bounce)
Life
Mechanical
20 x 106 operations minimum
AC Contact rating
100 x 103 operations min.
DC contact rating
-
Vibration
Resistance
Misoperation
10 to 55 Hz, at double amplitude of 0.7 mm
Endurance
10-55Hz, at double amplitude of 1.5 mm
Shock
Resistance
Misoperation
Electrical
Other
Weight
Endurance
Min. 100m/s2 (11±1ms)
Min. 1,000m/s2 (6±1ms)
Approximately 13g
*1 Need to consider the heat from PCB when max. current is more than 10A.
*2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
FTR-K1 SERIES
n INSULATION
Item
FTR-K1
Note
Resistance (initial)
Minimum 1,000 MΩ 1 min.
at 500 VDC
Dielectric
Strength
open contacts
1,000 VAC (50/60 Hz) 1 min.
coil and contacts
5,000 VAC (50/60 Hz) 1 min.
Surge Voltage (coil and contact)
10,000 V
Clearance/Creepage
10 mm / 10 mm
Insulation (DIN EN61810-1 VDE0435)
Voltage
Pollution
Isolation material group
250 V
3
IIIa
1.2 x 50µs standard wave
Isolation category / Reference voltage (VDE0110b) C / 250 V
n SAFETY STANDARDS
Type
Compliance
Contact rating
UL
UL 508
Flammability: UL 94-V0 (plastics)
E63614
FTR-K1AL ( )W-(LA, LB)
10A, 277 VAC (resistive)
1/3 HP, 125VAC
1/2 HP, 277VAC
Pilot duty: B300
FTR-K1CL( )W-LA
10A, 277 VAC (resistive)
CSA
C22.2 No. 14
LR 40304
VDE
0435, 0631, 0700, 0860
SEMKO
EN 61058-1:1992 and A1
250VAC, 10 (3)A 40T85 (-LA)
EN 61095:1993 and A1+A11 250VAC, 10 (3)A 40T105(-LB)
FTR-K1AL ( )W-(LA, LB)
10A, 250 VAC, 150,000 cycles, LA: 85ºC, LB:105ºC
3A, 250 VAC (cosØ=0.4), 100,000 cycles, LA: 85ºC, LB:105ºC
FTR-K1CL( )W-LA
10A, 250VAC, 100,000 cycles, 85ºC
Complies with NEMKO, DEMKO, FIMKO
FTR-K1 SERIES
n CHARACTERISTIC DATA
70
0A
60
50
40
30
20
0
0
0A
0
0.2
0.4
0.6
0.8
.0
Service Life (03 operations)
Life Curve
000
250VAC resistive
500
250VAC cosφ=0.7
200
00
AC250V cosφ=0.4
30
(05ºC)
20
0
0
2
3
4
5
6
7
8
2
9 0 2
Contact Current Load (A)
0A
0A
.5
ot coil)
ge (h
rate volta
0.5
e
must op
coil)
ge (cool
ate volta
er
op
must
0
20
40
60
80
80
5
2
0.5
0.2
Release
70
60
50
40
30
80
200
500 000
70
60
50
40
30
0
Nominal Voltage Multiplying Factor
00
FTR-KAL02W-LA
N=00
Make
90
0
0 20 30 40 50 60 70 80 90 00
50
Distribution of Contact Resistance
20
0
20
00
20
0
0
Contact Voltage (V)
FTR-KAL02W-LA
N=00
Operate
90
FTR-K-AL
AC resistive
0
0.
00
Maximum Switching Power
20
Ambient temperature (ºC)
Distribution of Operation &
Release Voltage
00
FTR-K AL
300
50
FTR-K AL
.2
Coil Power (W)
50
Switching Current (A)
80
Operating Range
2.5
Distribution (%)
90
Distribution (%)
Temperature Rise (deg.)
Nominal voltage multiplying factor
Coil Temperature Rise
00
0
0
0
20
30
40
Contact Resistance (mΩ)
50
FTR-K1 SERIES
n DIMENSIONS
l Dimensions
l Schematics
(BOTTOM VIEW)
FTR-K1AL ( ) W-LA
29 +0.3
12.7+0.3
5
8
15.7+0.3
NO
COM
2
4
0.5
0.3
φ 0.45
(2.6)
20
3.5
3.3
Orientation mark
Presolder
0.9
(2.6)
0.9
7.5
l PC board mounting
hole layout
(BOTTOM VIEW)
(29)
20
(2.6)
2-φ ±0.
3.5
7.5
(2.6)
2-φ .3±0.
l Dimensions
l Schematics
(BOTTOM VIEW)
FTR-K1AL ( ) W-LB
15.7 +0.3
8
7
5
12.7 +0.3
29 +0.3
COM
NO
COM
NO
4
2
20 ±0.25
0.5
5
0.9
(2.6)
0.9
7.5
l PC board mounting
hole layout
(BOTTOM VIEW)
(2.6)
20
2-φ±0.
5
4-φ .3±0.
(2.6)
(2.6)
0.3
7.5
φ 0.45
3.3
Orientation mark
Unit: mm
FTR-K1 SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l
All signal and power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, DecaBDE).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
FTR-K1 SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. July 21, 2008.
Similar pages