GOOD-ARK MBRF1650 Schottky barrier rectifier Datasheet

MBR16xx, MBRF16xx & MBRB16xx Series
Reverse Voltage 35 to 60 Volts
Schottky Barrier Rectifiers
Forward Current 16.0 Amperes
Features
‹ Plastic package has Underwriters Laboratory Flammability
Classifications 94V-0
‹ Metal silicon junction, majority carrier conduction
‹ Low power loss, high efficiency
‹ Guardring for overvoltage protection
‹ For use in low voltage, high frequency inverters, free wheeling,
and polarity protection applications
‹ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
Mechanical Data
‹ Case: JEDEC TO-220AC, ITO-220AC & TO-263AB molded
plastic body
‹ Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
‹ Polarity: As marked
‹ Mounting Position: Any
‹ Mounting Torque: 10 in-lbs maximum
‹ Weight: 0.08 ounce, 2.24 grams
ITO-220AC
TO-220AC
TO-263AB(D2PAK)
Mounting Pad Layout TO-263AB
Dimensions in inches and (millimeters)
366
Maximum Ratings and Electrical Characteristics
( TC = 25oC unless otherwise noted )
Parameter
Symbol
MBR1635
MBR1645
MBR1650
MBR1660
Unit
Maximum repetitive peak reverse voltage
VRRM
35
45
50
60
Volts
Working peak reverse voltage
VRWM
35
45
50
60
Volts
Maximum DC blocking voltage
V DC
35
45
50
60
Maximum average forward rectified current at TC=125oC
IF(AV)
16
Amps
Peak repetitive forward current (rated VR, sq. wave,
20KHz) at TC=125oC
IFRM
32
Amps
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
150
Amps
Peak repetitive reverse current at tp = 2.0us, 1KHz
IRRM
1.0
0.5
Amps
dv/dt
10,000
1,000
V/us
VF
0.63
0.75
Volt
0.57
0.65
0.2
1.0
40
50
Voltage rate of change (rated VR)
Volts
Maximum instantaneous forward voltage (Note 4)
at IF=16A, TC=25oC
at IF=16A, TC=125oC
Maximum instantaneous
reverse current at rated DC
blocking voltage (Note 4)
TC=25oC
TC=125oC
Typical thermal resistance from junction to case
RMS Isolation voltage (MBRF type only) from terminals
to heatsink with t = 1.0 second, RH < 30%
Operating junction temperature range
Storage temperature range
Notes:
IR
mA
o
RθJC
MBR 1.5 / MBRF 3.0 / MBRB 1.5
VISOL
4500 (Note 1)
3500 (Note 2)
1500 (Note 3)
TJ
-55 to +150
o
C
-55 to +150
o
C
TSTG
1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset
2. Clip mounting (on case), where leads do overlap heatsink
3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19")
4. Pulse test: 300us pulse width, 1% duty cycle
367
C/W
Volts
RATINGS AND CHARACTERISTIC CURVES
( TA = 25oC unless otherwise noted )
368
Similar pages