Diodes DL4002-13-F 1.0a surface mount glass passivated rectifier Datasheet

DL4001 - DL4007
1.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER
Features
•
•
•
•
•
Glass Passivated Junction
High Current Capability
Low Forward Voltage Drop
Low Leakage Current
Lead Free Finish/RoHS Compliant Version (Note 2)
A
B
C
Mechanical Data
•
•
•
•
•
•
•
Case: MELF
Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
Terminals: Solderable per MIL-STD-202, Method 208
Lead Free Plating (Matte Tin Finish).
Polarity: Cathode Band
Marking: Cathode Band Only
Approximate Weight: 0.25 grams
MELF
Dim
Min
Max
A
4.80
5.20
B
2.40
2.60
C
0.55 Nominal
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
@TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Symbol
DL
4001
DL
4002
DL
4003
DL
4004
DL
4005
DL
4006
DL
4007
Unit
VRRM
VRWM
VR
50
100
200
400
600
800
1000
V
VR(RMS)
35
71
141
283
424
566
707
V
Average Forward Rectified
Current
@ TT = 75°C
Peak Forward Surge Current 8.3ms single half sine-wave
Superimposed on Rated Load
IO
1.0
A
IFSM
30
A
Maximum Forward Voltage
@ IF = 1.0A
VFM
1.1
V
@ TA = 25°C
@ TA = 100°C
IRM
5.0
50
μA
RθJA
50
°C/W
CT
15
pF
Tj, TSTG
-55 to +150
°C
Maximum DC Reverse Current
@Rated DC Blocking Voltage
Typical Thermal Resistance, Junction to Ambient Air
Typical Total Capacitance (Note 1)
Operating and Storage Temperature Range
Notes:
1. Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
2. RοHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
DS16001 Rev. 9 - 3
1 of 2
www.diodes.com
DL4001-DL4007
© Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
IO, AVERAGE RECTIFIED CURRENT (A)
1.0
0.8
0.6
0.4
0.2
0
40
60
80
100
120 140
160
TA, AMBIENT TEMPERATURE (ºC)
Fig. 1 Forward Current Derating Curve
1.0
0.1
0.01
0.4
180
0.6
0.8
1.0
1.2
1.4
1.6
1.8
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
IFSM, PEAK FORWARD SURGE CURRENT (A)
100
CT, TOTAL CAPACITANCE (pF)
10
10
f = 1MHz
TJ = 25ºC
30
25
20
15
10
5
0
1
1
1
10
100
VR, REVERSE VOLTAGE (V)
Fig. 3 Typical Total Capacitance vs. Reverse Voltage
10
100
NUMBER OF CYCLES AT 60 Hz
Fig. 4 Max Non-Repetitive Peak Forward Surge Current
Ordering Information
Device
DL4001-13-F
DL4002-13-F
DL4003-13-F
DL4004-13-F
DL4005-13-F
DL4006-13-F
DL4007-13-F
Packaging
MELF
MELF
MELF
MELF
MELF
MELF
MELF
Shipping
5,000/Tape & Reel
5,000/Tape & Reel
5,000/Tape & Reel
5,000/Tape & Reel
5,000/Tape & Reel
5,000/Tape & Reel
5,000/Tape & Reel
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product
described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,
harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written
approval of the President of Diodes Incorporated.
DS16001 Rev. 9 - 3
2 of 2
www.diodes.com
DL4001-DL4007
© Diodes Incorporated
Similar pages