DC / DC Converter Series CT-13DS1 SERIES 3000Vdc Isolation Single & Dual Output 1 Watt Dc-Dc Converter FEATURES: ●Small Footprint ●22PIN SMD Package ●High Efficiency up to 80% ●Recognized By UL 60950-1 ●Unregulated Output Types ●High Power Density ●Industry Standard Pinout ●Operating Temperature:-40℃ TO +85℃ ●No External Component Required Specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified Output Output Package Efficiency Style Part Number Voltage Current Vdc mA % TYP CT-XXS03NNL CT-XXS05NNL CT-XXS09NNL CT-XXS12N2NL CT-XXS15N2NL CT-XXD03NNL CT-XXD05NNL CT-XXD09NNL CT-XXD12N2NL CT-XXD15N2NL 3.3 5 9 12 15 ±3.3 ±5 ±9 ±12 ±15 303 200 112 84 67 ±150 ±100 ±56 ±42 ±34 Note:1.”XX” Is Input Voltage:03=3.3Vdc,05=5Vdc, 09=9Vdc,12=12Vdc,15=15Vdc. 3.The input voltage increases, there will be an increase in efficiency. Input Specifications Parameters Voltage Tolerance Filter Conditions Vo,Io Nom Min Conditions Min 65 70 75 78 80 65 70 75 78 80 1 1 1 2 2 1 1 1 2 2 2.Over 12Vdc,15Vdc input voltage, using the 2nd package. Typ Max Units ±10 % Max Units ±5 % Capacitor Output Specifications Parameters 100% full load Voltage Tolerance Short Circuit Protection Typ Short Term 1 Sec Line Regulation For 1.0% OF Vin 1.2 Load Regulation 3.3V (10% To 100% F.L) 15 Load Regulation 5V, 9V (10% To 100% F.L) 12&8.0 Load Regulation 12V,15V (10% To 100% F.L.) 8.5&7.0 % BW=DC To 20MHz 75 mVp-p Ripple & Noise Transient response setting time 50% load step change % % 350 % us General Specifications Parameters Conditions Min Isolation Resistance 500Vdc 1000 Switching Frequency Full load,nominal input Non Condensing Free air Convection DAP MIL-HDBK-217F@25℃ Package1 or Package2 Package 1 Package 2 Max Units 85 95 MΩ KHz ℃ % 100 -40 Operating Temperature Humidity Cooling Case material MTBF Weight Dimensions Dimensions Typ 3500000 1.8 15.24x8.0x7.30 15.24x8.0x8.50 Hours g mm mm  CET Technology, LLC • www.cettechnology.com, E: [email protected] • T: 603.894.6100 • F: 603.894.6161 DC / DC Converter Series CT-13DS1 SERIES 3000Vdc Isolation Single & Dual Output 1 Watt Dc-Dc Converter Tolerance Envelope Graph 100 120% 80% +Vout Cin GND 3.3V:Cin 5V :Cin 9V :Cin 12V:Cin 15V:Cin Cin 3.3V :Cout 22uF,16V 5V :Cout 10uF,25V 9V :Cout 4.7uF,25V 12V:Cout 2.2uF,25V 15V:Cout 1uF,50V GND 110% 13DS1 - 05 S 12 N 2 NL A B C D E F G A:Series B:Input Voltage C:Single(S)Dual(D) D:Output Voltage E:Unregulated(N) F:Packge G:RoHS Version +Vout Single Cout 4.7uF,25V 4.7uF,25V 4.7uF,25V 2.2uF,25V 1uF,5 0V Part Number Vin -Vout 120% Output Current(%) Recommended Test Circuit Vin 90% 100 100% 85 Ambient Temperature(℃) 80% -40 10% 0 70% 70% 60% Nature Convection 90% 40% 25 100% 50% 50 110% 20% 75 30% Output Voltage(%) OutPut Power(%) Temperature Derating Graph 3.3V:Cin 5V :Cin 9V :Cin 12V :Cin 15V:Cin Cout Dual 4.7uF,25V 4.7uF,25V 4.7uF,25V 2.2uF,25V 1uF,50V Com Cout 3.3V :Cout 22uF,16V 5V :Cout 10uF,25V 9V :Cout 4.7uF,25V 12V:Cout 2.2uF,25V 15V:Cout 1uF,50V -Vout Markings and Dimensions 12.70 12 2.54±0.10 1 22 12 1.00 11 2.54±0.10 1 1.00 2.00 11.75 2.00 0.50±0.05 12.70 15.24 8.00 8.00 7.75 22 2 7.75 15.24 11.75 1 11 0.50±0.05 2.54 SUGGESTED PAD LAYOUT 2.54 7.30 8.50 SUGGESTED PAD LAYOUT 12.70 11.00 7.00 12.70 8.20 11.00 Unit：mm Unless otherwise specified, all tolerances are ±0.25 PIN Connection PIN Single Dual 1 -Vin -Vin 3 +Vin +Vin 5 NC NC 9 -Vout Com 11 NC -Vout 12 NC NC 14 +Vout +Vout 18 NC NC 20 NC NC 22 NC NC  CET Technology, LLC • www.cettechnology.com, E: [email protected] • T: 603.894.6100 • F: 603.894.6161