AZETTLER AZ986-1A-24DC4R2 40 amp 280-iso automotive relay Datasheet

AZ986
40 AMP 280-ISO
AUTOMOTIVE
RELAY
FEATURES
•
•
•
•
•
•
•
•
40 Amp contact rating
Coils to 24VDC
High operating temperature (125°C)
SPST (1 Form A), SPDT (1 Form C)
Available with shrouded weatherproof cover
Coil suppression available
ISO/TS 16949, ISO9001, ISO 14000
Tested in accordance with SAE J2544
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 40 A 14 VDC Res.
Ratings
Resistive load:
Max. switched power: 560 W (SPST)
560 W (N.O.)
420 W (N.C.)
Operate Time (max.)
7 ms at nominal coil voltage
Release Time (max.)
4 ms at nominal coil voltage
Max. switched current: 40 A (SPST)
40 A (N.O.)
30 A (N.C.)
Dielectric Strength
500 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms contact to contact
Insulation Resistance
600 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
-55°C (-67°F) to 125°C (257°F)
-55°C (-67°F) to 155°C (311°F)
Max. switched voltage: 100 VDC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material
Silver tin oxide
Resistance
< 100 milliohms initially
(6 V, 1 A voltage drop method)
Vibration
1.27mm DA 10-40 Hz
5 g 40-70 Hz
0.5mm DA 70-100 Hz
10 g 100-500 Hz
Shock
200 m/s2
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
0.110 Quick Connect
COIL
Power
At Pickup Voltage
(typical)
0.58 W
Max. Continuous
Dissipation
3.7 W at 20°C (68°F)
Temperature Rise
52°C (94°F) at nominal coil voltage
Temperature
Max. 180°C (356°F)
Note: Allow suitable slack on leads when wiring, and do
not subject the terminals to excessive force.
Weight
22 grams (37 grams shrouded version)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
1/17/07W
AZ986
RELAY ORDERING DATA
COIL SPECIFICATIONS
Nominal Coil
VDC
6
12
24
Must Operate
VDC
3.6
7.2
14.4
Max. Continuous
VDC
10
20.2
39.3
Coil Resistance
± 10%
27
109
436
RELAY ORDERING DATA
AZ986-1C-12DC2R1
Blank - Standard no diode, no resistor
R1 - 180 Ohm, ½ w resistor in parallel with 6 V coil
680 Ohm, ½ w resistor in parallel with 12 V coil
2700 Ohm ½ w resistor in parallel with 24 V coil
R2 - 220 Ohm, ½ w resistor in parallel with 6 V coil
820 Ohm, ½ w resistor in parallel with 12 V coil
3200 Ohm ½ w resistor in parallel with 24 V coil
D1 - 1A7 diode in parallel with coil, anode
on #86 terminal
D2 - 1A7 diode in parallel with coil, cathode
on #86 terminal
D3 - 1A4 diode in parallel with coil, anode
on #86 terminal
D4 - 1A4 diode in parallel with coil, cathode
on #86 terminal
C1 - Plastic dust cover unsealed
C2 - Plastic dust cover sealed
C3 - Plastic dust cover, shrouded, steel mounting
bracket, unsealed
C4 - Plastic dust cover, shrouded, steel mounting
bracket, sealed
24D - 24 volt coil
12D - 12 volt coil
6D - 6 volt coil
1A - SPNO Single pole normally open
1C - SPDT Single pole double throw
Basic series designation - AZ986
1/17/07W
AZ986
MECHANICAL DATA
Outline Dimensions
Versions C1 & C2
Outline Dimensions
Versions C3 & C4
1.122 MAX
[28.5]
Wiring Diagram
.654
[16.6]
Ø.262
[6.65]
1.004 MAX
[25.5]
.433±.020
[11.0±0.5]
.354
[9.0]
87
85
.858
[21.8]
86
.319±.008
[8.1±0.2]
1.780
[45.2]
.638±.008
[16.2±0.2]
.776
[19.7]
1.122 MAX
[28.5]
.563
[14.3]
.031
[0.8]
.110
[2.8]
.110
[2.8]
1.398
[35.5]
.638
[16.2]
.319
[8.1]
1.398
[35.5]
5x.031
[0.8]
.638±.008
[16.2±0.2]
+.008
5X.031 -.004
[0.8 ] +0.2
1 Form A
87
5x.110
[2.8]
.307±.008
[7.8±0.2]
.319±.008
[8.1±0.2]
30
87A
86
85
30
.307
[7.8]
-0.1
.504
[12.8]
.307
[7.8]
5X.110±.008
[2.8±0.2]
1 Form C
BOTTOM VIEW
BOTTOM VIEW
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
1/17/07W
Similar pages