KBP200 - KBP210 SILICON BRIDGE RECTIFIERS PRV : 50 - 1000 Volts Io : 2.0 Amperes KBP 0.71 (18.0) 0.63 (16.0) FEATURES : * * * * * * High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board 0.825 (20.95) 0.605 (15.36) + AC AC 0.035 (0.89) 0.028 (0.71) 0.500 (12.7) MIN. MECHANICAL DATA : 0.16 (4.00) 0.14 (3.55) 0.276 (7.01 ) 0.236 (5.99) 0.105 (2.66) 0.085 (2.16) * Case : Molded plastic * Epoxy : UL94V-O rate flame retardant * Terminals : Plated lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 3.4 grams Dimensions in inches and ( millimeter ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL KBP 200 KBP 201 KBP 202 KBP 204 KBP 206 KBP 208 KBP 210 UNIT Maximum Recurrent Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Current Tc = 50°C IF(AV) 2.0 Amps. IFSM 60 Amps. 2 It 10 A 2S VF 1.0 Volts IR 10 µA IR(H) 1.0 mA CJ 24 pF RθJA 30 °C/W TJ - 50 to + 125 °C TSTG - 50 to + 125 °C RATING Peak Forward Surge Current, Single half sine wave Superimposed on rated load (JEDEC Method) Rating for fusing ( t < 8.3 ms. ) Maximum Forward Voltage per Diode at IF = 1.0 Amp. Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Junction Capacitance per Diode (Note 1) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range Notes : 1 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2 ) Thermal resistance from Junction to Ambient with units mounted on a 0.47" X 0.47" ( 12mm X 12mm ) Cu. Pads. UPDATE : MARCH 6, 2000 RATING AND CHARACTERISTIC CURVES ( KBP200 - KBP210 ) AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.0 60 Hz, Resistive or inductive load. 1.5 1.0 0.5 P.C. Board Mounted with 0.47" X 0.47" ( 12mm X 12mm ) Cu. pads. 0 0 25 50 75 100 125 150 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 80 70 60 TJ = 55 ° C 50 40 30 20 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 10 0 175 1 CASE TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES PER DIODE FORWARD CURRENT, AMPERES 100 Pulse Width = 300 µs 1 % Duty Cycle 10 1.0 TJ = 25 ° C 0.1 10 TJ = 100 ° C 1.0 TJ = 25 ° C 0.1 0.01 0 20 40 60 80 100 120 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS 1.8 140