ITF F9251 Saw bandpass filter 925.0 mhz Datasheet

SAW Bandpass Filter 925.0 MHz
Features
RF bandpass filter
No matching 50Ω single-ended operation
Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm )
RoHS Compliant
Package Dimensions
1
2
I
9251
3
6
6
1
5
5
2
4
4
3
Pin Configuration
Dimensions shown are nominal in millimeters
2
Input
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
5
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameter
Unit
Minimum
Typical
Maximum
Operating Temperature Range
℃
-20
25
75
Storage Temperature Range
℃
-40
Power Handling Capability
dBm
-
85
-
10
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9251
Rev. Date
2012-11-29
Rev.
NCNK02-AS01
1/7
SAW Bandpass Filter 925.0 MHz
Specifications
Fc = 925.0 MHz
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
925.0
-
MHz
Insertion Loss ( 922.0 ~ 928.0 MHz )
-
2.9
4.2
dB
Ripple ( 922.0 ~ 928.0 MHz )
-
0.5
2.0
dB
VSWR ( 922.0 ~ 928.0 MHz )
-
2.0
2.5
775.0 ~ 835.0 MHz
40
46
-
835.0 ~ 895.0 MHz
36
45
-
970.0 ~ 992.0 MHz
36
46
-
992.0 ~ 1075.0 MHz
38
44
-
Attenuation
Input/Output Impedance
dB
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9251
Rev. Date
2012-11-29
Rev.
NCNK02-AS01
2/7
SAW Bandpass Filter 925.0 MHz
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
I2)
9251 3)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9251
Rev. Date
2012-11-29
Rev.
NCNK02-AS01
3/7
SAW Bandpass Filter 925.0 MHz
Typical Performance ( at 25℃
℃)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9251
Rev. Date
2012-11-29
Rev.
NCNK02-AS01
4/7
SAW Bandpass Filter 925.0 MHz
Input / Output VSWR
Input / Output Smith Charts
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9251
Rev. Date
2012-11-29
Rev.
NCNK02-AS01
5/7
SAW Bandpass Filter 925.0 MHz
Packing Specification
1. Reeling Quantity : 1000 pcs / reel, 3000 pcs / reel
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F9251
Rev. Date
2012-11-29
Rev.
NCNK02-AS01
6/7
SAW Bandpass Filter 925.0 MHz
Carrier Tape Dimensions [unit : mm]
A
3.40 ± 0.1
B
3.40 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F9251
Rev. Date
2012-11-29
Rev.
NCNK02-AS01
7/7
Similar pages