DC11 POWER ENTRY MODULES WITHOUT LINE FILTER Actual information about approvals can be found on http://www.schurter.com/approvals C14 70° C Description Characteristics - Panel mount: Screw-on version from front or rear side, snap-in version from front side - 2 Functions: Connector Protection class I, Line switch 1- or 2-pole - Quick connect terminals 4.8 x 0.8 mm - Alternative: version with line filter DC12 - Substitute for type KEB1; KEB2 - Ultra-compact design - All single elements are already wired Unwired versions available on request - Line switch non-illuminated or illuminated - Ideal for application with high transient loads - Qualified for use in equipment according IEC/EN 60950 Other versions on request: - snap-in, panel thickness 1 and 3 mm unwired versions solder terminals line switch with other rocker marking line switch 1-pole for protection class II Technical data Ratings IEC Ratings UL/CSA Dielectric strength Allowable operation temp. Degree of protection Protection class Terminals Panel thickness s Materials: Housing Dimensiomounting ns Screw-on 1 www.schurter.com 10 A / 250 VAC; 50 Hz 12 A / 250 VAC; 50/60 Hz > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw-on: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-2 Appliance-inlet /-outlet Line switch C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold condition) pin-temperature 70 °C, 10 A, Protection class I Rocker switch 1- or 2-pole, non-illuminated or illuminated red or green, acc. to IEC 61058-1 Technical details GENERAL PRODUCT INFORMATION DC11 POWER ENTRY MODULES WITHOUT LINE FILTER Snap-in mounting Diagrams Line switch non-illuminated 2-pole 1) Line 2) Load Line switch illuminated 2-pole 1) Line 2) Load Line switch non-illuminated 1-pole 1) Line 2) Load Variants with internal connections Order Number Panel mounting Panel thickness s Line switch [mm] Illumination Color DC11.0021.201 Snap-in 1.5 2-pole l red DC11.0021.301 Snap-in 2 2-pole l red DC11.0021.401 Snap-in 2.5 2-pole l red DC11.0031.201 Snap-in 1.5 2-pole l green DC11.0031.301 Snap-in 2 2-pole l green DC11.0031.401 Snap-in 2.5 2-pole l green DC11.0001.203 Snap-in 1.5 1-pole DC11.0001.303 Snap-in 2 1-pole DC11.0001.403 Snap-in 2.5 1-pole DC11.0001.201 Snap-in 1.5 2-pole DC11.0001.301 Snap-in 2 2-pole DC11.0001.401 Snap-in 2.5 2-pole DC11.0021.001 Screw-on 2-pole l red DC11.0031.001 Screw-on 2-pole l green DC11.0001.003 Screw-on 1-pole DC11.0001.001 Screw-on 2-pole Packaging unit 2 50 Pcs www.schurter.com Accessories ACCESSORIES