PHILIPS I74F657D Octal transceiver with 8-bit parit generator/checker Datasheet

INTEGRATED CIRCUITS
74F657
Octal transceiver with 8-bit parit
generator/checker
Process specification
IC15 Data Handbook
1990 Jul 30
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
FEATURES
74F657
The parity select (ODD/EVEN) input gives the user the option of
odd or even parity systems.
• Combines 74F245 and 74F280A functions in one package
• High impedance base input for reduced loading (70µA in
The parity (PARITY) pin is an output from the generator/checker
when transmitting from the port A to B (T/R = high) and an input
when receiving from port B to A port ( T/R = low).
When transmitting (T/R = high) the parity select (ODD/EVEN) input
is set, then the A port data is polled to determined the number of
high bits. The parity (PARITY) output then goes to the logic state
determined by the parity select (ODD/EVEN) setting and by the
number of high bits on port A.
For example, if the parity select (ODD/EVEN) is set low (even
parity), and the number of high bits on port A is odd, then the parity
(PARITY) output will be high, transmitting even parity. If the number
of high bits on port A is even, then the parity (PARITY) output will
be low, keeping even parity.
high and low states)
• Ideal in applications where high output drive and light bus
loading are required (IIL is 70µA vs FAST std of 600µA)
• 3–state buffer outputs sink 64mA and source 15mA
• Input diodes for termination effects
• 24–pin plastic slim DIP (300mil) package
• Industrial temperature range available (–40°C to +85°C)
DESCRIPTION
The 74F657 is an octal transceiver featuring non–inverting
buffers with 3–state outputs and an 8–bit parity
generator/checker, and is intended for bus–oriented
applications. The buffers have a guaranteed current sinking
capability of 24mA at the A ports and 64mA at the B ports.
The transmit/receive (T/R) input determines the direction of
the data flow through the bidirectional transceivers.
Transmit (active high) enables data from A ports to B ports;
receive (active low) enables data from B ports to A ports.
When in receive mode (T/R = low) the B port is polled to determine
the number of high bits. If parity select (ODD/EVEN) is low (even
parity) and the number of highs on port B is:
(1) odd and the parity (PARITY) input is high, then ERROR will be
high, significantly no error.
(2) even and the parity (PARITY) input is high, then ERROR will be
asserted low, indicating an error.
The output enable (OE) input disables both the A and B ports by
placing them in a high impedance condition when the OE input is
high.
TYPE
TYPICAL PROPAGATION DELAY
TYPICAL SUPPLY
CURRENT( TOTAL)
74F657
8.0ns
100mA
ORDERING INFORMATION
ORDER CODE
COMMERCIAL RANGE
INDUSTRIAL RANGE
VCC = 5V ±10%,
PKG DWG #
Tamb = 0°C to +70°C
VCC = 5V ±10%,
Tamb = –40°C to +85°C
N74F657N
I74F657N
SOT222-1
DESCRIPTION
24–pin plastic slim
DIP (300mil)
24–pin plastic SOL
N74F657D
I74F657D
SOT137-1
24–pin plastic SSOP
N74F657DB
I74F657DB
SOT340-1
INPUT AND OUTPUT LOADING AND FAN OUT TABLE
PINS
DESCRIPTION
74F (U.L.)
HIGH/LOW
LOAD VALUE
HIGH/LOW
A0 – A7
A ports 3–state inputs
3.5/0.117
70µA/70µA
B0 – B7
B ports 3–state inputs
3.5/0.117
70µA/70µA
PARITY
Parity input
3.5/0.117
70µA/70µA
Transmit/receive input
2.0/0.066
40µA/40µA
Parity select input
1.0/0.033
20µA/20µA
Output enable input (active low)
2.0/0.066
40µA/40µA
T/R
ODD/EVEN
OE
A0 – A7
A ports 3–state outputs
150/40
3.0mA/24mA
B0 – B7
B ports 3–state outputs
750/106.7
15mA/64mA
PARITY
Parity output
750/106.7
15mA/64mA
ERROR
Error output
750/106.7
15mA/64mA
Note to input and output loading and fan out table
1. One (1.0) FAST unit load is defined as: 20µA in the high state and 0.6mA in the low state.
90 July 30
2
853 1117 00081
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
PIN CONFIGURATION
T/R
74F657
LOGIC SYMBOL
1
24 OE
A0 2
23 B0
A1 3
22 B1
A2 4
21 B2
A3 5
20 B3
A4 6
VCC 7
2
19 GND
24
OE
18 GND
11
ODD/EVEN
A6 9
16 B5
A7 10
15 B6
ODD/EVEN 11
14 B7
VCC = Pin 7
GND = Pin 18, 19
SF00414
IEC/IEEE SYMBOL
G3
3 EN1/3G5 (REC)
3 EN2 (XMIT)
N4
23
1
Z11
2
3
22
4
21
5
20
6
17
8
16
9
15
10
14
11
2k
.
.
.
4, 2
18
4, 1
13
5
12
SF00416
90 July 30
8
9
10
PARITY
13
ERROR
12
22
21
20
17
16
15
14
13 PARITY
ERROR 12
2
6
B0 B1 B2 B3 B4 B5 B6 B7
23
11
5
A0 A1 A2 A3 A4 A5 A6 A7
T/R
17 B4
24
4
1
A5 8
1
3
3
SF00415
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
74F657
LOGIC DIAGRAM
T/R
OE
A0
A1
A2
A3
A4
A5
A6
A7
ODD/EVEN
1
24
2
23
3
22
4
21
5
20
6
17
8
16
9
15
10
14
B0
B1
B2
B3
B4
B5
B6
B7
13 PARITY
11
12
VCC = Pin 7,
GND = Pin 18, 19
90 July 30
ERROR
SF00417
4
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
74F657
FUNCTION TABLE
NUMBER OF INPUTS THAT ARE HIGH
INPUTS
INPUT/OUTPUT
OUTPUTS
OE
T/R
ODD/EVEN
PARITY
ERROR
OUTPUTS MODE
0, 2, 4, 6, 8
L
L
L
L
L
L
H
H
L
L
L
L
H
L
H
H
L
L
H
L
H
L
H
L
Z
Z
H
L
L
H
Transmit
Transmit
Receive
Receive
Receive
Receive
1, 3, 5, 7
L
L
L
L
L
L
H
H
L
L
L
L
H
L
H
H
L
L
L
H
H
L
H
L
Z
Z
L
H
H
L
Transmit
Transmit
Receive
Receive
Receive
Receive
H
X
X
Z
Z
Z
Don’t care
Notes to function table
1. H = High voltage level
2. L = Low voltage level
3. X = Don’t care
4. Z = High impedance ”’off” state
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the
operating free air temperature range.)
SYMBOL
PARAMETER
RATING
UNIT
VCC
Supply voltage
–0.5 to +7.0
V
VIN
Input voltage
–0.5 to +7.0
V
IIN
Input current
–30 to +5
mA
VOUT
Voltage applied to output in high output state
–0.5 to VCC
V
IOUT
Current applied to output in low output state
A0 – A7
48
mA
B0 – B7, PARITY, ERROR
128
mA
Commercial range
0 to +70
°C
Industrial range
–40 to +85
°C
–65 to +150
°C
Tamb
Tstg
Operating free air temperature range
Storage temperature range
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
LIMITS
UNIT
MIN
NOM
MAX
5.0
5.5
VCC
Supply voltage
4.5
VIH
High–level input voltage
2.0
VIL
Low–level input voltage
0.8
V
IIk
Input clamp current
–18
mA
IOH
High–level output current
A0 – A7
–3
mA
B0 – B7, PARITY, ERROR
–15
mA
IOL
Low–level output current
A0 – A7
24
mA
B0 – B7, PARITY, ERROR
64
mA
Tamb
90 July 30
Operating free air temperature range
5
V
V
Commercial range
0
+70
°C
Industrial range
–40
+85
°C
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
74F657
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST
LIMITS
CONDITIONS1
All outputs
High-level output voltage
B0 – B7,
VIL = MAX,
PARITY,
VIH = MIN
ERROR
2.4
V
±5%VCC
2.7
V
IOH = –12mA5
±10%VCC
2.0
V
±5%VCC
2.0
V
±10%VCC
2.0
V
±5%VCC
2.0
V
–15mA4
IOL =
±10%VCC
0.35
0.50
V
±5%VCC
0.35
0.50
V
48mA4
24mA4,5
VCC = MIN,
VOL
Low-level output voltage
B0 – B7,
VIL = MAX,
IOL =
±10%VCC
0.38
0.55
V
PARITY,
VIH = MIN
IOL = 48mA5
±5%VCC
0.42
0.55
V
64mA4
±5%VCC
0.42
0.55
V
–0.73
-1.2
V
VCC = 0.0V, VI = 7.0V
100
µA
VCC = 5.5V, VI = 5.5V
2
1
mA
mA
204
µA
405
µA
404
µA
805
µA
–20
µA
–40
µA
ERROR
VIK
II
Input clamp voltage
Input current at
maximum input voltage
IOL =
VCC = MIN, II = IIK
OE, T/R,
ODD/EVEN
A0 – A7
B0 – B7
OOD/EVEN
IIH
High–level input current
VCC = MAX, VI = 2.7V
OE, T/R
IIL
Low–level input current
UNIT
MAX
±10%VCC
IOH =
A0 – A7
TYP2
IOH = –3mA4,5
VCC = MIN,
VOH
MIN
OOD/EVEN
VCC = MAX, VI = 0.5V
OE, T/R
IOZH + IIH
Off–state output current,
high–level voltage applied
A0 – A7,
B0 – B7,
VCC = MAX, VO = 2.7V
70
µA
IOZL + IIL
Off–state output current,
low–level voltage applied
PARITY
VCC = MAX, VO = 0.5V
–70
µA
IOZH
Off–state output current,
High–level voltage applied
ERROR
VCC = MAX, VO = 2.7V
50
µA
IOZL
Off–state output current,
low–level voltage applied
VCC = MAX, VO = 0.5V
–50
µA
IOS
Short circuit output current3
-60
-150
mA
-100
-225
mA
90
1254
mA
90
1355
mA
106
1504
mA
106
1605
mA
98
145
A0 – A7
VCC = MAX
B0 – B7
ICCH
ICC
Supply current (total)
ICCL
VCC = MAX
ICCZ
mA
Notes to DC electrical characteristics
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25°C.
3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
4. For commercial range.
5. For industrial range.
90 July 30
6
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
74F657
AC ELECTRICAL CHARACTERISTICS
LIMITS
Tamb = +25°C
SYMBOL
PARAMETER
TEST
CONDITION
Tamb = 0°C to +70°C
Tamb = –40°C to +85°C
VCC = +5.0V ± 10%
CL = 50pF,
RL = 500Ω
VCC = +5.0V
CL = 50pF,
RL = 500Ω
VCC = +5.0V ± 10%
CL = 50pF,
RL = 500Ω
UNIT
MIN
TYP
MAX
MIN
MAX
MIN
MAX
Waveform 2
2.5
3.0
5.5
6.0
7.5
7.5
2.5
3.0
8.0
8.0
2.0
2.5
9.0
9.0
ns
7.0
7.0
10.0
10.0
14.0
15.0
7.0
7.0
16.0
16.0
5.5
6.5
16.5
19.0
ns
4.5
4.5
7.5
8.0
11.0
11.5
4.5
4.5
12.0
12.5
3.5
4.0
13.0
15.5
tPLH
tPHL
Propagation delay
An to Bn or Bn to An
tPLH
tPHL
Propagation delay
An to PARITY
Waveform 1, 2
tPLH
tPHL
Propagation delay
ODD/EVEN to PARITY,
ERROR
Waveform 1, 2
tPLH
tPHL
Propagation delay
Bn to ERROR
Waveform 1, 2
8.0
8.0
14.0
14.0
20.5
20.5
7.5
7.5
22.5
22.5
7.5
7.5
24.5
25.0
ns
tPLH
tPHL
Propagation delay
PARITY to ERROR
Waveform 1, 2
8.0
8.0
11.5
12.0
15.5
15.5
7.5
8.0
16.5
17.0
6.5
6.5
18.5
20.0
ns
tPZH
tPZL
Output enable time1
to high or low level
Waveform 3, 4
3.0
4.0
5.5
7.0
8.0
9.5
3.0
4.0
9.0
11.0
2.0
4.0
9.0
13.0
ns
ns
tPHZ
Output disable time
2.0
4.5
7.5
2.0
8.0
1.0
8.0
Waveform 3, 4
ns
tPLZ
from high or low level
2.0
4.0
6.0
2.0
6.5
1.0
7.5
Note to AC electrical characteristics
1. These delay times reflect the 3-state recovery time only and not the signal through the buffers or the parity check circuitry. To assure VALID
information at the ERROR pin, time must be allowed for the signal to propagate through the drivers (B to A), through the parity check circuitry
(same as A to PARITY), and to the ERROR output. VALID data at the ERROR pin > (B to A) + (A to PARITY).
AC WAVEFORMS
An, Bn,
ODD/EVEN,
PARITY
OE
VM
VM
VM
tPHL
PARITY,
ERROR
tPZH
tPLH
VM
VM
An, Bn,
PARITY,
ERROR
VM
tPHZ
VM
0V
SF00418
SF00419
Waveform 1. Propagation delay for inverting outputs
An, Bn,
ODD/EVEN,
PARITY
VM
VM
tPLH
tPHL
Waveform 3. 3-state output enable time to high level and output
disable time from high level
OE
VM
An, Bn,
PARITY,
ERROR
VM
tPZL
VM
VOH -0.3V
tPLZ
VM
3.5V
An, Bn,
PARITY,
ERROR
SF00420
VM
VOL +0.3V
Waveform 2. Propagation delay for non-Inverting outputs
SF00421
Waveform 4. 3-state output enable time to low level and output
disable time from low level
Note to AC waveforms
1. For all waveforms, VM = 1.5V.
90 July 30
7
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
74F657
TEST CIRCUIT AND WAVEFORMS
VCC
7.0V
VIN
RL
VOUT
PULSE
GENERATOR
tw
90%
NEGATIVE
PULSE
VM
CL
AMP (V)
VM
10%
D.U.T.
RT
90%
10%
tTHL (tf )
tTLH (tr )
tTLH (tr )
tTHL (tf )
0V
RL
AMP (V)
90%
90%
Test Circuit for Open Collector Outputs
POSITIVE
PULSE
VM
VM
10%
TEST
tPLZ
tPZL
All other
SWITCH
closed
closed
open
DEFINITIONS:
RL = Load resistor;
see AC electrical characteristics for value.
CL = Load capacitance includes jig and probe capacitance;
see AC electrical characteristics for value.
RT = Termination resistance should be equal to ZOUT of
pulse generators.
10%
tw
SWITCH POSITION
0V
Input Pulse Definition
INPUT PULSE REQUIREMENTS
family
amplitude VM
74F
3.0V
1.5V
rep. rate
tw
tTLH
tTHL
1MHz
500ns
2.5ns
2.5ns
SF00128
90 July 30
8
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
DIP24: plastic dual in-line package; 24 leads (300 mil)
1990 Jul 30
9
74F657
SOT222-1
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
SO24: plastic small outline package; 24 leads; body width 7.5 mm
1990 Jul 30
10
74F657
SOT137-1
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm
1990 Jul 30
11
74F657
SOT340-1
Philips Semiconductors
Product specification
Octal transceiver with 8-bit parity generator/checker
74F657
Data sheet status
Data sheet
status
Product
status
Definition [1]
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
 Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Document order number:
yyyy mmm dd
12
Date of release: 10-98
9397-750-05171
Similar pages