Panasonic ECHU1273GC9 Plastic film capacitor Datasheet

Plastic Film Capacitors
Stacked Metallized PPS Film Chip Capacitor
Type:
ECHU(C)
Stacked metallized PPS film as dielectric with simple
mold-less construction
■Features
• Small in size
• Low loss and excellent frequency characteristics
• For reflow soldering
• RoHS directive compliant
■Recommended Applications
• Time-constant
• Filtering
• Oscillation and resonance
• Resonance circuit for LCD backlight inverter unit
■Explanation of Numbers
1
2
3
4
5
E
C
H
U
1
Product code
Dielectric &
construction
6
8
9
10
11
C
Rated voltage
1
7
Capacitance
100 VDC
Cap. Tol. Suffix
G ±2 %
J ±5 %
Suffix
9
V
Tape width
12 mm
16 mm
■Specifications
Category temp. range
(Including temperature-rise on unit surface)
−55 ℃ to +105 ℃
Rated voltage
100 VDC
Capacitance range
0.010 µF to 0.22 µF(E12)
Capacitance tolerance
±2 %(G),±5 %(J)
Withstand voltage
Between terminals : Rated volt. (VDC)✕150 % 60 s
Dissipation factor (tan )
tanδ≦0.6 % (20 ℃, 1 kHz)
Insulation resistance (IR)
IR≧3000 MΩ(20 ℃, 100 VDC, 60 s)
Soldering conditions
Reflow soldering : 260 ˚C max. and 95 s max. at more than 220 ˚C
(Temp. at cap. Surface)
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Plastic Film Capacitors
■Dimensions in mm (not to scale)
■ Construction
size
L
W
H
code
E1
4.8
3.3
1.4
E2
4.8
3.3
2.0
E3a
4.8
3.3
2.4
E3
4.8
3.3
2.8
D1
6.0
4.1
1.8
D2
6.0
4.1
2.0
D3
6.0
4.1
2.4
D4
6.0
4.1
2.8
D5
6.0
4.1
3.2
Z
7.1
5.0
❈
Y
7.1
6.3
❈
❈Refer to the column
“ Rating,Dimensions&Quantity”
■Taping Specification for Automatic Mounting
Refer to the page of taping specifications.
■ Rating, Dimensions & Quantity/Reel
●Capacitance tolerance: ±2 % (G), ±5 % (J)
Rated volt. 100 VDC
Cap.(µF)
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
Part No.
ECHU1103□C9
ECHU1123□C9
ECHU1153□C9
ECHU1183□C9
ECHU1223□C9
ECHU1273□C9
ECHU1333□C9
ECHU1393□C9
ECHU1473□C9
ECHU1563□C9
ECHU1683□C9
ECHU1823□C9
ECHU1104□C9
ECHU1124□C9
ECHU1154□CV
ECHU1184□CV
ECHU1224□CV
↑
Dimensions (mm)
L
4.8
4.8
4.8
4.8
4.8
4.8
6.0
6.0
6.0
6.0
6.0
7.1
7.1
7.1
7.1
7.1
7.1
W
3.3
3.3
3.3
3.3
3.3
3.3
4.1
4.1
4.1
4.1
4.1
5.0
5.0
5.0
6.3
6.3
6.3
H
1.4
1.4
2.0
2.0
2.4
2.8
1.8
2.0
2.4
2.8
3.2
2.8
3.0
3.4
3.4
4.0
4.8
Size
Code
E1
E1
E2
E2
E3a
E3
D1
D2
D3
D4
D5
Z
Z
Z
Y
Y
Y
Q'ty
3000
2000
3000
2000
1500
1000
Cap. tol. code
■Recommended for Land Dimensions (mm)
Land dimensions
Size code
E1,E2,E3a,E3
D1,D2,D3,D4,D5
Z
Y
Reflow soldering
A
B
C
2.6
3.8
4.5
4.5
6.6
7.8
9.0
9.0
3.0
3.8
4.6
5.7
❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when
“Recommender for Land dimensions” is adopted.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Similar pages