Fairchild H11B1 Photodarlington optocoupler Datasheet

PHOTODARLINGTON OPTOCOUPLERS
DESCRIPTION
The CNX48U, H11BX, MOC8080 and TIL113 have a
gallium arsenide infrared emitter optically coupled to a
silicon planar photodarlington.
CNX48U
H11B1
MOC8080 TIL113
H11B2
H11B255
H11B3
FEATURES
• High sensitivity to low input drive current
• Meets or exceeds all JEDEC Registered Specifications
• VDE 0884 approval available as a test option
-add option .300. (e.g., H11B1.300)
6
1
6
SCHEMATIC
1
ANODE 1
6 BASE
APPLICATIONS
•
•
•
•
•
Low power logic circuits
6
Telecommunications equipment
Portable electronics
Solid state relays
Interfacing coupling systems of different potentials and impedances.
Parameter
CATHODE 2
5 COLLECTOR
N/C 3
1
4 EMITTER
Symbol
Device
Value
Units
TSTG
All
-55 to +150
°C
Operating Temperature
TOPR
All
-55 to +100
°C
Lead Solder Temperature
TSOL
All
260 for 10 sec
°C
250
mW
3.3
mW/°C
TOTAL DEVICE
Storage Temperature
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
EMITTER
Continuous Forward Current
Reverse Voltage
Forward Current - Peak (300 µs, 2% Duty Cycle)
LED Power Dissipation @ TA = 25°C
Derate above 25°C
PD
All
IF
All
100
mA
VR
All
6
V
IF(pk)
All
PD
DETECTOR
All
CNX48U, TIL113
H11B1, H11B2
Collector-Emitter Breakdown Voltage
BVCEO
H11B3
H11B255
MOC8080
3.0
A
100
mW
1.8
mW/°C
30
25
V
55
CNX48U, H11B1
H11B2, H11B3
Collector-Base Breakdown Voltage
BVCBO
MOC8080
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
V
55
V
7
V
TIL113
H11B255
Emitter-Collector Breakdown Voltage
30
BVECO
All
PD
All
150
mW
2.0
mW/°C
6/1/00
200042A
PHOTODARLINGTON OPTOCOUPLERS
CNX48U
H11B1
MOC8080 TIL113
ELECTRICAL CHARACTERISTICS
H11B2
H11B255
H11B3
(TA = 25°C Unless otherwise specified.)
INDIVIDUAL COMPONENT CHARACTERISTICS
Parameter
Test Conditions
Symbol
EMITTER
H11B255
(IF = 10 mA)
MOC8080
VF
(IF = 10 mA, TA = -55°C)
(IF = 50 mA)
Capacitance
DETECTOR
Collector-Emitter
Breakdown Voltage
Typ**
Max
0.8
1.2
1.5
1.2
1.3
0.9
1.3
1.7
0.7
TIL113
CNX48U
MOC8080
(IF = 10 mA, TA = 100°C)
Reverse Leakage Current
Min
Unit
H11B1, H11B2
(IF = 10 mA)
Input Forward Voltage
Device
1.05
1.4
H11B3
1.35
1.5
10
(VR = 6 V)
IR
All
0.001
(VF = 0 V, f = 1.0 MHz)
C
All
50
(IC = 1 mA, IF = 0)
(IC = 100 µA, IF = 0)
CNX48U
BVCEO
(IC = 10 mA, IF = 0)
30
60
25
60
55
70
30
100
V
µA
pF
TIL113
H11B1, H11B2
H11B3
(IC = 100 µA, IF = 0)
H11B255
(IC = 1 mA, IF = 0)
MOC8080
V
CNX48U, H11B1
Collector-Base
(IC = 100 µA, IE = 0)
H11B2, H11B3
BVCBO
Breakdown Voltage
H11B255
(IC = 100 µA, IF = 0)
Emitter-Collector
Breakdown Voltage
Collector-Emitter
Dark Current
TIL113
MOC8080
(IE = 100 µA, IB = 0)
BVECO
All
(VCE = 10 V, Base Open)
ICEO
All
V
55
100
7
10
1
V
100
nA
Note
** Typical values at TA = 25°C
6/1/00
200042A
PHOTODARLINGTON OPTOCOUPLERS
CNX48U
H11B1
MOC8080 TIL113
TRANSFER CHARACTERISTICS
DC Characteristics
Test Conditions
Symbol
(IF = 10 mA, VCE = 1 V)
Current(1)
Device
Min
MOC8080
50 (500)
H11B255
10 (100)
CNX48U
60 (600)
TIL113
30 (300)
H11B1
5 (500)
IC (CTR)
(IF = 1 mA, VCE = 5 V)
(IF = 1 mA, VCE = 1 V)
H11B3
5 (500)
1.75 (350)
1.0
CNX48U
1.0
H11B255
1.0
(IF = 8 mA, IC = 2 mA)
TIL113
1.25
(IC = 10 mA, VCE = 10 V)
(RL = 100 1) (Fig.7)
toff
(IF = 10 mA, VCC = 5 V)
H11B1
ton
V
25
H11B2
H11B255
18
H11B3
ton
3.5
(Fig. 8)
toff
36
(IF = 1 mA, VCC = 5 V)
ton
(RE = 100 1), (RBE = 1M1)
Units
mA (%)
H11B3, MOC8080
VCE(sat)
Max
(IF = 50 mA, IC = 50 mA)
AC Characteristics
Switching Times
2 (200)
1 (100)
Typ**
H11B1, H11B2
(IF =1 mA, IC = 1 mA)
(IF = 5 mA, IC = 10 mA)
H11B2
H11B3
CNX48U
(IF = 0.5 mA, VCE = 1 V)
Saturation Voltage
H11B255
(TA = 25°C Unless otherwise specified.)
(IF = 10 mA, VCE = 5 V)
Collector Output
H11B2
µs
CNX48U
70
(RE = 1k1), (RBE = 10M1)
(Fig. 8)
toff
(IF = 5 mA, VCC = 10 V)
ton
(RL = 100 1) (Fig.7)
toff
(IF = 200 mA, IC = 50 mA)
ton
(VCC = 10 V) (RL = 100 1)
(Fig.7)
190
3.5
MOC8080
25
0.35
5
55
100
Typ**
Max
TIL113
toff
ISOLATION CHARACTERISTICS
Characteristic
Input-Output Isolation Voltage(2)
Isolation Resistance(2)
Isolation Capacitance(2)
Test Conditions
Symbol
(II-O 61 µA, Vrms, t = 1 min.)
Min
5300
Units
Vac(rms)
(VI-O = 500 VDC)
RISO
1011
1
(VI-O = , f = 1 MHz)
CISO
0.8
pf
Note
** Typical values at TA = 25°C
6/1/00
200042A
PHOTODARLINGTON OPTOCOUPLERS
CNX48U
H11B1
MOC8080 TIL113
TA = 0˚C, 25˚C
TA = 70˚C
TA = 100˚C
TA = -55˚C
1
NORMALIZED TO:
CTR @ IF = 10 mA
TA = 25˚C
VCE = 5 V
0.1
0.1
1
10
100
1
NORMALIZED TO:
CTR @ IF = 10 mA
TA = 25˚C
VCE = 10 V
0.1
-80
NORMALIZED TO:
IF = 1 mA
VCE = 5 V
IF = 10 mA
10
IF = 5 mA
6
4
IF = 2 mA
2
IF = 1 mA
0
0
1
2
3
4
5
6
7
8
-40
-20
0
20
40
60
80
100
120
Fig. 4 Dark Current vs. Ambient Temperature
ICEO - COLLECTOR-EMITTER DARK CURRENT (nA)
IC - COLLECTOR CURRENT (NORMALIZED)
16
8
-60
TA - AMBIENT TEMPERATURE (˚C)
Fig. 3 Collector Current vs. Collector-Emitter Voltage
12
H11B3
10
IF - LED INPUT CURRENT (mA)
14
H11B255
Fig. 2 Current Transfer Ratio vs. Ambient Temperature
CTR - CURRENT TRANSFER RATIO (NORMALIZED)
CTR - CURRENT TRANSFER RATIO (NORMALIZED)
Fig. 1 Output Current vs. Input Current
H11B2
9
10000
VCE = 10 V
1000
100
10
1
0.1
0.01
10
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (˚C)
VCE- COLLECTOR -EMITTER VOLTAGE (V)
Fig. 5 Turn-On Time vs. Input Current
Fig. 6 Turn-Off Time vs. Input Current
1000
1000
RL = 1 k1
VCC = 10 V
100
10
TOFF - TIME (µs)
TON - TIME (µs)
RL = 100 1
RL = 10 1
RL = 1 k1
100
RL = 100 1
10
RL = 10 1
1
VCC = 10 V
1
0.1
0.1
1
10
IF - LED INPUT CURRENT (mA)
100
0.1
1
10
100
IF - LED INPUT CURRENT (mA)
6/1/00
200042A
PHOTODARLINGTON OPTOCOUPLERS
CNX48U
H11B1
MOC8080 TIL113
H11B2
H11B255
H11B3
TYPICAL ELECTRO-OPTICAL CHARACTERISTIC CURVES
(25°C Free air temperature unless otherwise specified) (Cont.)
INPUT
VCC
RL
RIN
PULSE
OUTPUT
INPUT
5V
OUTPUT
10%
1.5 V
90%
t on
t off
IF
Test Circuit (All devices except CNX48U)
Switching Waveforms (All devices except CNX48U)
Fig. 7 Switching Time Test Circuit and Waveforms (All devices except CNX48U)
VCC
INPUT
INPUT
90%
R BE
501
10%
OUTPUT
RE
Test Circuit (CNX48U only)
t on
t off
Switching Waveforms (CNX48U only)
Fig. 8 Switching Time Test Circuit and Waveforms (CNX48U only)
Notes
1. The current transfer ratio(IC/IF) is the ratio of the detector collector current to the LED input current with VCE @ 10 V.
2. For this test, LED pins 1 and 2 are common and phototransistor pins 4,5 and 6 are common.
6/1/00
200042A
PHOTODARLINGTON OPTOCOUPLERS
CNX48U
H11B1
MOC8080 TIL113
Package Dimensions (Through Hole)
H11B2
H11B255
H11B3
Package Dimensions (Surface Mount)
PIN 1
ID.
0.350 (8.89)
0.330 (8.38)
3
2
PIN 1
ID.
1
0.270 (6.86)
0.240 (6.10)
SEATING PLANE
0.270 (6.86)
0.240 (6.10)
0.350 (8.89)
0.330 (8.38)
4
5
0.070 (1.78)
0.045 (1.14)
6
0.300 (7.62)
TYP
0.070 (1.78)
0.045 (1.14)
0.200 (5.08)
0.115 (2.92)
0.200 (5.08)
0.165 (4.18)
0.016 (0.41)
0.008 (0.20)
0.020 (0.51)
MIN
0.154 (3.90)
0.100 (2.54)
0.016 (0.40)
0.008 (0.20)
0.022 (0.56)
0.016 (0.41)
0° to 15°
0.020 (0.51)
MIN
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
0.300 (7.62)
TYP
0.100 (2.54)
TYP
0.016 (0.40) MIN
0.315 (8.00)
MIN
0.405 (10.30)
MAX
Lead Coplanarity : 0.004 (0.10) MAX
Package Dimensions (0.4”Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
0.270 (6.86)
0.240 (6.10)
0.070 (1.78)
0.060 (1.52)
SEATING PLANE
0.350 (8.89)
0.330 (8.38)
0.415 (10.54)
0.070 (1.78)
0.045 (1.14)
0.100 (2.54)
0.295 (7.49)
0.030 (0.76)
0.200 (5.08)
0.115 (2.92)
0.154 (3.90)
0.100 (2.54)
0.004 (0.10)
MIN
0.016 (0.40)
0.008 (0.20)
0° to 15°
0.022 (0.56)
0.016 (0.41)
0.100 (2.54) TYP
0.400 (10.16)
TYP
NOTE
All dimensions are in inches (millimeters)
6/1/00
200042A
PHOTODARLINGTON OPTOCOUPLERS
CNX48U
H11B1
MOC8080 TIL113
H11B2
H11B255
H11B3
ORDERING INFORMATION
Order Entry Identifier
Option
S
.S
Description
Surface Mount Lead Bend
SD
.SD
Surface Mount; Tape and reel
W
.W
0.4” Lead Spacing
300
.300
VDE 0884
300W
.300W
VDE 0884, 0.4” Lead Spacing
3S
.3S
VDE 0884, Surface Mount
3SD
.3SD
VDE 0884, Surface Mount, Tape & Reel
QT Carrier Tape Specifications (“D” Taping Orientation)
12.0 ± 0.1
4.85 ± 0.20
4.0 ± 0.1
0.30 ± 0.05
4.0 ± 0.1
Ø1.55 ± 0.05
1.75 ± 0.10
7.5 ± 0.1
16.0 ± 0.3
13.2 ± 0.2
9.55 ± 0.20
0.1 MAX
10.30 ± 0.20
Ø1.6 ± 0.1
User Direction of Feed
NOTE
All dimensions are millimeters
6/1/00
200042A
PHOTODARLINGTON OPTOCOUPLERS
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
www.fairchildsemi.com
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
© 2000 Fairchild Semiconductor Corporation
6/1/00
200042A
Similar pages