ILSI I408-31663VS-20.000 Leaded oscillator, ocxo metal package, 26 mm x 26 mm Datasheet

Leaded Oscillator, OCXO
Metal Package, 26 mm X 26 mm
Frequency
Output Level
Level
Duty Cycle
Rise / Fall Time
Output Load
Supply Voltage
Current (Warm Up)
Current @ +25 C
Control Voltage (“V” option)
Slope
Temperature
Operating
Storage
Environmental
Package Information
1.000 MHz to 150.000 MHz
TTL
HC-MOS
‘0’= 0.4 VDC Max., ‘1’ = 2.4 VDC Min.
‘0’ = 0.1 Vcc Max., ‘1’= 4.5 VDC Min.
Specify 50%  10% or  5% See Table
10 nS Max. @ Fo < 16 MHz, 5 nS Max. @ Fo > 16 MHz
5 TTL
See Table
5.0 VDC  5%
600 mA Max.
250 mA @ 5 VDC
2.5 VDC  2.0 VDC, 8 ppm Min. for AT cut
Positive
Part Number Guide
Package
I408 -
Input
Voltage
5 = 5.0 V
9 = 12 V
3 = 3.3V
I408 Series
Operating
Temperature
Sine
+4 dBm,  3 dBm
N.A.
N.A.
50 Ohms
See Operating Temperature Table
-40 C to +85 C
See Appendix B for information
MSL = N.A., Termination = e1
Sample Part Number:
7 = 0 C to +50 C
Symmetry
(Duty Cycle)
5 = 45 / 55 Max.
1 = 0 C to +70 C
6 = 40 / 60 Max.
I408 - 5151YVA - 20.000 MHz
Output
Stability
(in ppm)
Voltage
Control
Crysta
l Cut
1 = 10TTL / 15 pF HC-MOS
Y = 0.5
V = Controled
A = AT
3 = 15 pF HC-MOS
1 = 0.25
6 = -10 C to +70 C
6 = 30 pF
2 = 0.1
3 = -20 C to +70 C
A = Sine
3 = 0.05 *
F = Fixed
S = SC
5 = 0.015 *
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and Gnd (pin 2) to minimize power supply noise.
* - Not available for all temperature ranges.
12/10_B
Frequency
ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com
Specifications subject to change without notice
- 20.000 MHz
Similar pages