Lumileds L130-MMSA001400001 Accentuating freshness and overall visual appeal, making food irresistible Datasheet

Illumination
LUXEON 3014 with
FreshFocus Technology™
Accentuating freshness and overall
visual appeal, making food irresistible
The LUXEON 3014 with FreshFocus Technology creates the most
impactful lighting ever available by accentuating the freshness
and overall visual appeal of a variety of fresh food areas such as
supermarkets, delis, butcher shops and bakeries. LUXEON 3014 with
FreshFocus Technology is an industry standard compatible 3.0mm x
1.4mm x 0.75mm footprint with specialty color and spectrum targeted
for highlighting the colors of different foods.
Features and BENEFITS
Primary Applications
Industry standard footprint and package compatible with existing designs
Specialty Lighting
1/9th ANSI micro-color binning enabling tight color control
–– Fresh Foods
Rectangular package design allows for increased uniformity
–– Linear Display
Drive at maximum current (120mA) for superior value
RoHS
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved.
No. E352519
COMPLIANT
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 3014 with FreshFocus Technology™ LEDs are tested and binned with 20ms monopulse of 60mA, at a junction
temperature, Tj, of 25°C.
Part Number Nomenclature
Part numbers for LUXEON 3014 with FreshFocus Technology follow the convention below:
L 1 3 0 – A A B B 0 0 1 4 0 0 0 0 1
Where:
A A –
designates product spectrum type (MM=Marbled Meat)
B B
designates color spectrum and color rendering options (SA=Spectrum A)
Therefore, the following part number is used for a LUXEON 3014 with FreshFocus Technology for Marbled Meat:
L 1 3 0 – M M S A 0 0 1 4 0 0 0 0 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3014 with
FreshFocus Technology is compliant to the European Union directives on the restriction of hazardous substances in electronic
equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add
the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB)
or polybrominated diphenyl ethers (PBDE).
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25°C.
Product
Spectrum
Minimum
CRI [1]
Marbled Meat
80
Minimum
Typical
Typical
Luminous
Efficacy (lm/W)
14.5
17.0
86.0
Luminous Flux [1] (lm)
Part Number
L130-MMSA001400001
Notes for Table 1:
1. Lumileds maintains a tolerance of ±2 on CRI and ±7.5% on luminous flux measurements.
Optical Characteristics
Table 2. Optical characteristics for LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25°C.
Part Number
Typical Total Included Angle [1]
Typical Viewing Angle [2]
L130-MMSA001400001
160°
120°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25ºC.
Part Number
L130-MMSA001400001
Forward Voltage [1] (Vf)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage (mV/°C)
2.8
3.1
3.3
-2.0 to -4.0
Typical Thermal
Resistance — Junction
to Solder Pad (°C/W)
35
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
3
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON 3014 with FreshFocus Technology.
Parameter
DC Forward Current
Maximum Performance
[1, 2]
Peak Pulsed Forward Current [1, 3]
LED Junction Temperature
[1]
(DC & Pulse)
120mA
150mA
115°C
ESD Sensitivity
Class 2A JS-001-2012
Operating Case Temperature [1]
-40°C to 105°C
LED Storage Temperature
-40°C to 100°C
Soldering Temperature
JEDEC 020D 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse)
-5V
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current
3. Pulsed operation with the maximum peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1. Typical normalized power vs. wavelength for LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25ºC.
Light Output Characteristics
Figure 2. Typical normalized light output vs. junction temperature for LUXEON 3014 with FreshFocus Technology at 60mA.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
5
Figure 3. Typical normalized light output vs. forward current for LUXEON 3014 with FreshFocus Technology at Tj=25°C.
Forward Current Characteristics
Figure 4. Typical forward current vs. forward voltage for LUXEON 3014 with FreshFocus Technology at Tj=25°C.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
6
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25ºC.
Figure 6. Typical polar radiation pattern for LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25ºC.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
7
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON 3014 with FreshFocus Technology LEDs are labeled using a 5-digit alphanumeric CAT code following the format below:
A x B C D
Where:
A x –
designates luminous flux bin (example: E0=15 to 17 lumens, G0=19 to 21 lumens)
B C –
designates color bin (example: DD, DE, DF, DG, DH, DJ, DK, DL, DM)
D
designates forward voltage bin (example: T=2.8 to 2.9V, X=3.1 to 3.2V)
–
Therefore, a LUXEON 3014 with FreshFocus Technology with a lumen range of 15 to 17, color bin of DF and a forward voltage
range of 2.8 to 2.9V has the following CAT code:
E 0 D F T
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON 3014 with FreshFocus Technology emitters. Although several bins are
outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available
in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25°C.
Bin
Luminous Flux [1] (lm)
Minimum
Maximum
D0
13
15
E0
15
17
F0
17
19
G0
19
21
Notes for Table 5:
1. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
8
Color Bin Definitions
Figure 7. 3- and 5-step MacAdam ellipse illustration for Table 6.
Figure 8. Color bin structure for LUXEON 3014 with FreshFocus Technology Marbled Meat.
Table 6. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 3014 with FreshFocus Technology at 60mA, Tj=25°C.
PRODUCT
Color Space
Center Point [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, θ
L130-MMSA001400001
Single 3-step MacAdam ellipse
(0.3860, 0.3300)
0.00939
0.00402
53.72°
L130-MMSA001400001
Single 5-step MacAdam ellipse
(0.3860, 0.3300)
0.01565
0.00670
53.72°
Notes for Table 6:
1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
9
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON 3014 with FreshFocus Technology, Tj=25°C.
Forward Voltage [1] (Vf)
Bin
Minimum
Maximum
T
2.8
2.9
V
2.9
3.0
W
3.0
3.1
X
3.1
3.2
Y
3.2
3.3
Z
3.3
3.4
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
Mechanical Dimensions
MAX 3,2
1,15
MAX 3,1
1,4
0,75
0,30
± 0,08
2,50
0,70
0,75
2,9
0,7
1,6
Figure 9. Mechanical dimensions for LUXEON 3014 with FreshFocus Technology.
Notes for Figure 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
10
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON 3014 with FreshFocus Technology.
PROFILE FEATURE
Lead-Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
10 to 30 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 9. Moisture sensitivity levels for LUXEON 3014 with FreshFocus Technology.
level
3
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
168 Hours
≤30°C / 60% RH
192 Hours +5 / -0
30°C / 60% RH
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
11
Solder Pad Design
0.11
Solder mask
1.51
Stencil
0.62
1.61
0.36
0.72
0.70
0.80
0.60
Top copper
Package geometric center
0.69
0.79
Figure 11. Recommended PCB solder pad layout for LUXEON 3014 with FreshFocus Technology.
Notes for Figure 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Packaging Information
Table 10. Material and component specifications for LUXEON 3014 with FreshFocus Technology.
MATERIAL/COMPONENT
SPECIFICATION
Lead Frame Base
Copper Alloy
Package Body
High Temperature Thermal Plastic
Encapsulate
Silicone Resin, with Phosphor
Weight
0.009 gram
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
12
Pocket Tape Dimensions
Figure 12. Pocket tape dimensions for LUXEON 3014 with FreshFocus Technology.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. The maximum number of consecutive LEDs missing is two.
Reel Dimensions
Figure 13. Reel dimensions for LUXEON 3014 with FreshFocus Technology.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS176 LUXEON 3014 with FreshFocus Technology Product Datasheet 20180302 ©2018 Lumileds Holding B.V. All rights reserved.
13
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2018 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS176 LUXEON 3014 with FreshFocus Technology
Product Datasheet 20180302
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.