Skyworks AWB7123HM41P8 1.93 ghz through 1.99 ghz small-cell power amplifier module Datasheet

AWB7123
1.93 GHz through 1.99 GHz
Small-Cell Power Amplifier Module
DATA SHEET
FEATURES
•
InGaP HBT Technology
•
-50 dBc ACPR @ + 5 MHz, +24.5 dBm
•
32.5 dB Gain
•
High Efficiency
•
Low Transistor Junction Temperature
•
Internally Matched for a 50 Ω System
•
Low Profile Miniature Surface Mount Package;
Halogen Free and RoHS Compliant
•
Multi-Carrier Capability
APPLICATIONS
•
WCDMA, HSDPA and LTE Air Interfaces
•
Picocell, Femtocell, Home Nodes
•
Customer Premises Equipment (CPE)
•
Data Cards and Terminals
PRODUCT DESCRIPTION
The AWB7123 is a highly linear, fully matched, power
amplifier module designed for picocell, femtocell, and
customer premises equipment (CPE) applications.
Its high power efficiency and low adjacent channel
power levels meet the extremely demanding needs
of small cell infrastructure architectures. Designed for
WCDMA, HSDPA, and LTE air interfaces operating
in the 1.93 GHz to 1.99 GHz band, the AWB7123
delivers up to +24.5 dBm of WCDMA (64 DPCH)
M41 Package
14 Pin 7 mm x 7 mm x 1.3 mm
Surface Mount Module
power with an ACPR of -50 dBc. It operates from
a convenient +4.2 V supply and provides 32 dB of
gain. The device is manufactured using an advanced
InGaP HBT MMIC technology offering state-of-theart reliability, temperature stability, and ruggedness.
The self-contained 7 mm x 7 mm x 1.3 mm surface
mount package incorporates RF matching networks
optimized for output power, efficiency, and linearity in
a 50 Ω system.
Matching
Network
Matching
Network
Bias
Control
Power
Detector
Figure 1: Block Diagram
204232B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 19, 2016
AWB7123
VREF
1
14
GND
GND
2
13
GND
GND
3
12
RFOUT
VCC1
4
11
VCC2
RFIN
5
10
GND
GND
6
9
GND
VDET
7
8
GND
GND
Figure 2: Pinout (X-ray Top View)
Table 1: Pin Description
2
PIN
NAME
DESCRIPTION
1
VREF
Reference Voltage
2
GND
Ground
3
GND
Ground
4
VCC1
Supply Voltage
5
RFIN
RF Input
6
GND
Ground
7
VDET
Detector Voltage
8
GND
Ground
9
GND
Ground
10
GND
Ground
11
VCC2
Supply Voltage
12
RFOUT
RF Output
13
GND
Ground
14
GND
Ground
Data Sheet
September 19, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204232B
AWB7123
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Supply Voltage (VCC)
0
+5
V
Reference Voltage (VREF)
0
+3.5
V
RF Output Power (POUT)
-
+28
dBm,
modulated
RF Input Power (PIN)
-
+10
dBm, CW
Class 1C
Class IV
-
MSL Rating (3)
4
-
Junction Temperature (TJ)
-
+150
°C
-40
+150
°C
ESD Rating
Human Body Model (1)
Charged Device Model (2)
Storage Temperature (TSTG)
Functional operation is not implied under these conditions. Exceeding any
one or a combination of the Absolute Maximum Rating Conditions may cause
permanent damage to the device. Exposure to absolute ratings for extended
periods of time may adversely affect reliability.
Notes:
(1) JEDEC JS-001-2010.
(2) JEDEC JESD22-C101D.
(3) 260 °C peak reflow.
Table 3: Operating Ranges
PARAMETER
MIN
TYP
MAX
UNIT
Operating Frequency (f)
1930
-
1990
MHz
Supply Voltage (VCC)
+3.2
+4.2
+4.5
V
Reference Voltage (VREF)
+2.80
0
+2.85
-
+2.90
+0.5
V
RF Output Power (POUT) (1)
-
+24.5
-
dBm
Case Temperature (TC) (2)
-40
-
+85
°C
COMMENTS
PA "on"
PA "shut down"
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions defined in the electrical specifications.
Notes:
(1) Typ RF Output Power is used during production test.
(2) Case Temperature references the board temperature at the ground paddle on the backside of the package.
Data Sheet
204232B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 19, 2016
3
AWB7123
Table 4: Electrical Specifications
(TC = +25 °C, VCC = +4.2 V, VREF = +2.85 V, 50 Ω system)
PARAMETER
MIN
TYP
MAX
UNIT
Gain (2)
30
32.5
37
dB
-
-50
-62
-48
-60
dBc
14.5
17.5
-
%
-
21
-
C/W
-
385
463
mA
Quiescent Current (Icq)
-
115
160
mA
Reference Current
-
6.3
10
mA
through VREF pin
Leakage Current
-
1.5
5
µA
VCC = +5 V, VREF = 0 V
Harmonics
2fo
3fo, 4fo
-
-54
-62
-46
-56
dBc
10
14
-
dB
-
+32
-
dBm
CW Tone
POUT ≤ +24.5 dBm
In-band load VSWR < 5:1
Out-of-band load VSWR < 10:1
Applies over all voltage and
temperature operating ranges
ACPR (1), (2), (3)
@ 5 MHz Offset
@ 10 MHz Offset
Power-Added Efficiency (1), (2), (3)
Thermal Resistance
Supply Current
(1), (2), (3)
Input Return Loss
P1dB
Spurious Output Level
(all spurious outputs)
Load mismatch stress with no
permanent degradation or failure
-
-
-60
dBc
8:1
-
-
VSWR
COMMENTS
Junction to Case
Total through VCC pins
V CC = +4.2 V, PIN = 0 dBm
Applies over full operating
temperature range
Notes:
(1) Measured at 1960 MHz.
(2) POUT = +24.5 dBm.
(3) TM1 WCDMA 64DPCH
4
Data Sheet
September 19, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204232B
AWB7123
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes.
Shutdown Mode
The power amplifier may be placed in a shutdown
mode by applying logic low levels (see Operating
Ranges table) to the VREF voltage.
VREF
0.1uF
1000pF
VCC1
TVS
Diode
100uF
10uF
0.1uF
1000pF
RF Input
DETOUT
0.1uF
100KΩ
4.7KΩ
VREF
1
14
GND
GND
2
13
GND
GND
3
12
RFOUT
VCC1
4
11
VCC2
RFIN
5
10
GND
GND
6
9
GND
VDET
7
8
GND
AWB7123
RF Output
VCC2
1000pF
0.1uF
10uF
100uF
100uF
TVS
Diode
GND
at slug
Notes:
1. 10uF and 100uF capacitors are optional.
2. Applications that have large supply voltage transients may benefit from the
use of TVS diodes. For such applications, recommended TVS diodes are
SM05T1G or SMJ5.0A.
Figure 3: Application Circuit Schematic
Data Sheet
204232B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 19, 2016
5
AWB7123
1
2
3
Figure 4: PCB Footprint
6
Data Sheet
September 19, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204232B
AWB7123
PACKAGE OUTLINE
Figure 5: M41 Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module
Pin 1 Identifier
Part Number
Date Code
YY= Year WW= Work Week
Marking Code
B7123H
Lot Number
Country Code
Figure 6: Branding Specification
Data Sheet
204232B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 19, 2016
7
AWB7123
COMPONENT PACKAGING
PIN 1
Figure 7: Tape & Reel Packaging
Table 5: Tape & Reel Dimensions
8
PACKAGE TYPE
TAPE WIDTH
POCKET PITCH
REEL
CAPACITY
MAX REEL DIA
7 mm x 7 mm x 1.3 mm
16 mm
12 mm
2500
13"
Data Sheet
September 19, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 204232B
AWB7123
ORDERING INFORMATION
ORDER
NUMBER
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
COMPONENT PACKAGING
AWB7123HM41P7
-40 oC to +85 oC
RoHS-compliant 14 Pin
7 mm x 7 mm x 1.3 mm
Surface Mount Module
Loose in Bag
AWB7123HM41P8
-40 oC to +85 oC
RoHS-compliant 14 Pin
7 mm x 7 mm x 1.3 mm
Surface Mount Module
Tape and Reel, 2500 pieces per Reel
AWB7123HM41P9
-40 oC to +85 oC
RoHS-compliant 14 Pin
7 mm x 7 mm x 1.3 mm
Surface Mount Module
Partial Reel
Data Sheet
204232B • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • September 19, 2016
9
AWB7123
Copyright © 2016 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These
materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be
used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these
materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or
product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and
shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document.
Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution,
reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND,
WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE
OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY
RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE
ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY
SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION,
WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which
the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify
Skyworks for any damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published
specifications as a result of design defects, errors, or operation of products outside of published parameters or design
specifications.
Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks
products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United
States and other countries. Third-party brands and names are for identification purposes only, and are the property of their
respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc.
Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
Skyworks Proprietary and Confidential information • Products and Product Information are Subject to Change Without Notice
10
Data Sheet
204232B • September 19, 2016
Similar pages