FUJITSU MB4072

FUJITSU SEMICONDUCTOR
DATA SHEET
DS04-13200-3E
LINEAR IC
1 CHANNEL 8-BIT D/A
CONVERTER
MB4072
1 CHANNEL 8-BIT D/A CONVERTER
The Fujitsu MB4072 is a High-Speed Digital to Analog Converter IC. The
MB4072’s current outputs are high impedance open-collector, which provide
voltage output with a load or current to voltage converter for various applications
with operational amplifiers, microcomputers, etc.
Threshold level of digital inputs is variable with the level control input for various
interface level.
•
•
•
•
•
•
•
•
•
•
•
•
Settling Time
: 85ns
Linearity Error
: ±0.19%max.
Full-scale Temperature coefficient: ±10ppm/°C typ.
Output Voltage Compliance : -10V to +18V
Multiplying Operation
True/Complimentary Current Sink Output
Adjustable Threshold Level of Digital Inputs :Interface directly with
TTL, CMOS, ECL, etc.
Wide Supply Voltage Range : ±4.5V to ±18V
Low Power Consumption
: 33mW at ±5V typ.
Operation Temperature
: -40°C to +85°C
Compatible with DAC-08
Package
: Plastic DIP Package: (Suffix: -P)
Plastic FPT Package: (Suffix: -PF)
PLASTIC PACKAGE
DIP-16P-M04
PLASTIC PACKAGE
FPT-16P-M06
PIN ASSIGNMENT
■ ABSOLUTE MAXIMUM RATINGS
(TA =25°C)
Parameter
Supply Voltage
Digital Input Voltage
Threshold Control Voltage
Reference Input Voltage
Differential Reference Input
Voltage
Reference Input Current
Power Consumption
Storage Temp.
NOTE:
VLC
1
16
COMP
IOUT
2
15
VREF(-)
V-
3
14
VREF(+)
4
13
V+
12
B8(LSB)
Symbol
Value
Unit
V+ to V-
37
V
VI
V- to V- +37
V
IOUT
TOP VIEW
VLC
V- to V+
V
(MSB)B1
5
VREF(+)
V- to V+
V
B2
6
11
B7
VREF(-)
V- to V+
V
B3
7
10
B6
VREF(+) to VREF(-)
±18.5
V
B4
8
9
B5
IREF
5
mA
PD
500
mW
TSTG
-55 to +125
°C
Permanent device damage may occur if the above Absolute Maximum
Ratings are exceeded. Functional operation should be restricted to the
conditions as detailed in the operational sections of this data sheet. Exposure
to absolute maximum rating conditions for extended periods may affect device
reliability.
This device contains circuitry to protect the inputs against
damage due to high static voltages or electric fields. However,
it is advised that normal precautions be taken to avoid
application of any voltage higher than maximum rated voltages
to this high impedance circuit.
1
MB4072
Fig. 1 - BLOCK DIAGRAM
V+
VLC
MSB
B1
B2
B3
B4
B5
B6
B7
LSB
B8
13
1
5
6
7
8
9
10
11
12
INTERFACE LEVEL CONTROL CIRCUIT
4 IOUT
BIAS
NETWORK
___
2 IOUT
VREF(+) 14
CURRENT
SW.
+
VREF(-) 15
REF
Amp
■
16
3
COMP
V-
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
Unit
Min
Typ
Max
V+
+4.5
-
+18
V
V-
-18
-
-4.5
V
TA
-40
-
+85
°C
Supply Voltage
Operating Temperature
2
MB4072
■
ELECTRICAL CHARACTERISTICS
(Recommended Operating Conditions unless otherwise noted.)
(V+ = +15V, V- = -15V, IREF = 2.0mA, TA = -40°C to +85°C )
Value
Parameter
Symbol
Unit
Min
Typ
Max
Resolution
8
8
8
bits
Monotonicity
8
8
8
bits
Linearity Error
LE
-
-
±0.19
% (FSR)
Settling Time (Final Value: ±1/2 LSB, TA=25°C, On/Off
Switching for Each bit/All bits)
tS
-
85
150
ns
tPLH
tPHL
-
35
60
ns
TCIFS
-
±10
±50
ppm/°C
Output Voltage Range (∆IFS 1/2 LSB, ROUT 20MΩ typ.)
VOC
-10
-
+18
V
Output Current at full-scale (VREF=10.000V, R14=5.000kΩ,
R15=5.000kΩ, TA=25°C)
IFS4
1.94
1.99
2.04
mA
Symmetry at full-scale (IFSS=IFS4-IFS2)
TFSS
-
±1.0
±8.0
µA
Output Current at zero scale
IZS
-
0.2
2.0
µA
Output Current Range (R14=5.000kΩ, R15=5.000kΩ,
VREF=+15.0V, V-=-10V)
IOR1
2.1
-
-
mA
Output Current Range (R14=5.000kΩ, R15=5.000kΩ,
VREF=+25.0V, V-=-12V)
IOR2
4.2
-
-
mA
Low-level Input Voltage (VLC=0V)
VIL
-
-
0.8
V
High-level Input Voltage (VLC=0V)
VIH
2.0
-
-
V
Low-level Input Current (VLC=0V, VIN=-10V to +0.8V)
IIL
-
-0.2
-10
µA
High-level Input Current (VLC=0V, VIN=2.0V to 18V)
IIH
-
0.002
10
µA
Propagation Delay Time (TA=25°C, On/Off Switching for
Each bit/All bits)
Temperature coefficient at full-scale
3
MB4072
■
ELECTRICAL CHARACTERISTICS (Continued)
(VS=±15V, IREF = 2.0mA, TA = -40°C to +85°C)
Value
Parameter
Symbol
Unit
Min
Typ
Max
VIS
-10
-
+18
V
VTHR
-10
-
+13.5
V
Reference Bias Current
I15
-
-1.0
-3.0
µA
Reference Input Through Rate (REQ=200Ω, RL=100Ω, CL=0pF)
dl
dt
4.0
8.0
-
mA/µs
Supply Voltage Sensitivity* (V+=+4.5V to +18V, IREF=1mA)
PSSIFS+
-
±0.0003
±0.01
%/%
Supply Voltage Sensitivity* (V-=-4.5V to -18V, IREF=1mA)
PSSIFS-
-
±0.002
±0.01
%/%
I-
-
2.3
3.8
mA
I-
-
-4.3
-5.8
mA
I-
-
2.4
3.8
mA
I-
-
-6.4
-7.8
mA
I-
-
2.5
3.8
mA
I-
-
-6.5
-7.8
mA
(V+=+5V, V-=-5V, IREF=1.0mA)
PD
-
33
48
mW
(V+=+5V, V-=-15V, IREF=2.0mA)
PD
-
103
136
mW
(V+=+15V, V-=-15V, IREF=2.0mA)
PD
-
135
174
mW
Logic Input Voltage Range (V-=-15V)
Logic Threshold Voltage Range (V+=+15V, V-=-15V)
(V-=+5V, V-=-5V, IREF=1.0mA)
Supply Current
(V+=+5V, V-=-15V, IREF=2.0mA)
(V+=+15V, V-=-15V, IREF=2.0mA)
Power Dissipation
*Note:
4
∆IFS
PSSIFS=(____
IFS
18-4.5
x 100) / ( _______ x 100)
15
MB4072
Fig. 2 - WAVEFORM SYNTHESIZER
Pattern
Generator
2mA
+10V
14
5kΩ
IO
5kΩ
__
IO
-
4
MB4072
15
5kΩ
5 to 12
2
+
VOUT
5kΩ
5
MB4072
■
PACKAGE DIMENSIONS
16-LEAD PLASTIC DUAL IN-LINE PACKAGE
(Case No.: DIP-16P-M04)
15°MAX
+.008
+0.20
.770 -.012 (19.55 -0.30 )
INDEX-1
.244±.010
(6.20±0.25)
.300(7.62)
TYP
INDEX-2
+.012
.039-0
+.012
-0
(1.52 +0.30 )
-0
.010±.002
.060
(0.99+0.30 )
-0
(0.25±0.05)
.172(4.36)MAX
.118(3.00)MIN
.100(2.54)
TYP
.050(1.27)
MAX
1991 FUJITSU LIMITED D16033S-2C
6
.018±.003
.020(0.51)MIN
(0.46±0.08)
Dimensions in
inches (millimeters)
MB4072
■
PACKAGE DIMENSIONS (Continued)
16-LEAD PLASTIC FLAT PACKAGE
(Case No.: FPT-16P-M06)
.089(2.25)MAX
+.010
+0.25
.400 -.008 (10.15-0.20 )
(MOUNTING HEIGHT)
.002(0.05)MIN
(STAND OFF HEIGHT)
.307±.016
(7.80±0.40)
INDEX
.209±.012
“B”
+.016
+0.40
.268 -.008 (6.80 -0.20 )
(5.30±0.30)
.020±.008
(0.50±0.20)
.050(1.27)
TYP
.018±.004
Ø.005(0.13)
.006 +.002 (0.15 +0.05 )
-.001
-0.02
M
(0.45±0.10)
“A”
Details of “A” part
.016(0.40)
.004(0.10)
.350(8.89) REF
1991 FUJITSU LIMITED F16015S-2C
.008(0.20)
.007(0.18)
MAX
.027(0.68)
MAX
Details of “B” part
.006(0.15)
.008(0.20)
.007(0.18)
MAX
.027(0.68)
MAX
Dimensions in
inches (millimeters)
7
MB4072
FUJITSU LIMITED
For further information please contact:
Japan
FUJITSU LIMITED
Corporate Global Business Support Division
Electronic Devices
KAWASAKI PLANT, 1015, Kamikodanaka
Nakahara-ku, Kawasaki-shi
Kanagawa 211, Japan
Tel: (044) 754-3753
Fax: (044) 754-3329
North and South America
FUJITSU MICROELECTRONICS, INC.
Semiconductor Division
3545 North First Street
San Jose, CA 95134-1804, U.S.A.
Tel: (408) 922-9000
Fax: (408) 432-9044/9045
Europe
FUJITSU MIKROELEKTRONIK GmbH
Am Siebenstein 6-10
63303 Dreieich-Buchschlag
Germany
Tel: (06103) 690-0
Fax: (06103) 690-122
Asia Pacific
FUJITSU MICROELECTRONICS ASIA PTE. LIMITED
No. 51 Bras Basah Road,
Plaza By The Park,
#06-04 to #06-07
Singapore 189554
Tel: 336-1600
Fax: 336-1609
All Rights Reserved.
Circuit diagrams utilizing Fujitsu products are included as a
means of illustrating typical semiconductor applications.
Complete information sufficient for construction purposes is not
necessarily given.
The information contained in this document has been carefully
checked and is believed to be reliable. However, Fujitsu
assumes no responsibility for inaccuracies.
The information contained in this document does not convey any
license under the copyrights, patent rights or trademarks claimed
and owned by Fujitsu.
Fujitsu reserves the right to change products or specifications
without notice.
No part of this publication may be copied or reproduced in any
form or by any means, or transferred to any third party without
prior written consent of Fujitsu.
The information contained in this document are not intended for
use with equipments which require extremely high reliability
such as aerospace equipments, undersea repeaters, nuclear
control systems or medical equipments for life support.
F9601
 FUJITSU LIMITED Printed in Japan
8