NI NI9211 C series analog output module Datasheet

C Series Analog Output Modules
NI 9263, NI 9265 NEW!
• ±10 V and 0 to 20 mA analog
output ranges, 16-bit resolution,
100 kS/s simultaneous update rate
• 4 channels per module
• Isolation up to 2,300 Vrms (withstand),
up to 250 Vrms (continuous)
• Per-channel digital-to-analog
converter (DAC) for simultaneous
analog output
• ±30 V overvoltage protection and
short-circuit protection for direct
connection to actuators and
industrial devices
• Excellent relative accuracy optimized
for single-point control applications
• NIST-traceable calibration certificate
for guaranteed accuracy
Compatibility
Product
NI 9263
NI 9265
CompactRIO NI CompactDAQ Signal Type
Voltage
3
3
–
Current
3
Channels
4
4
Resolution (bits)
16
16
Max Update
Rate (S/s)
100 k/ch
100 k/ch
Range
±10 V
0 to 20 mA
Current Drive
1 mA/ch
20 mA/ch
Simultaneous
Updating
Isolation Connector Options
Screw Terminal
3
3
Screw Terminal
3
3
Table 1. C Series Analog Output Modules Selection Guide
Overview
High-performance analog output modules for National Instruments
CompactRIO embedded systems, R Series expansion chassis, and
NI CompactDAQ provide accurate signal generations. Each module
features built-in signal conditioning and an integrated connector with
screw terminal or cable options for flexible and low-cost signal wiring.
All modules feature the NI CompactRIO Extreme Industrial Certifications
and Ratings.
System Compatibility
You can use NI C Series modules in multiple system types depending
on available software. Please see the table above for CompactRIO and
NI CompactDAQ module compatibility because not all modules work
with both systems. Many of the advanced features described apply
only to reconfigurable I/O systems and not to NI CompactDAQ.
Advanced Features
Advanced features include ±30 V overvoltage protection and short-circuit
protection, simultaneous 16-bit per-channel digital-to-analog converters
(DACs), high-speed settling, excellent monotonicity and NIST-traceable
calibration. The NI 926x modules include a channel-to-earth ground doubleisolation barrier for safety and noise immunity. The NI 9265 provides highperformance, 0 to 20 mA analog outputs ideal for controlling industrial
pressure, flow, and position actuators. The NI 9265 requires a 9 to 36 V
external power supply for driving the output current of the module.
When used in CompactRIO, C Series analog output modules connect
directly to reconfigurable I/O (RIO) FPGA hardware to create highperformance embedded systems hat deliver the optimization and
flexibility of a custom electrical circuit completely dedicated to your
input/output application. The reconfigurable FPGA hardware within
CompactRIO provides a variety of options for timing, triggering,
synchronization, change detection, digital pattern matching, or digital
communication. For instance, with CompactRIO you can implement a
circuit to generate complex arbitrary waveforms, perform filtering or
splining to generate a smooth output signal based on a choppy lowspeed output command, simulate a nonlinear sensor, or implement
amplitude/phase modulation.
Key Features
• High-performance analog output signal generation for CompactRIO
embedded system, R Series expansion chassis, or NI CompactDAQ
• Screw terminals, strain relief, high-voltage, and cable options
• NI CompactRIO Extreme Industrial Certifications and Ratings
• Channel-to-earth ground double-isolation barrier for safety
and noise immunity
Visit ni.com/compactrio or ni.com/compactdaq for up-to-date
information on module availability, example programs, application notes,
and other developer tools.
North American
Hazardous Locations
Typical certifications – Actual specifications vary from product to
product. Visit ni.com/certification for details.
C Series Module Accessories
Connectivity Accessories
CompactRIO and NI CompactDAQ systems are designed to provide
flexible options for low-cost field wiring and cabling. Most C Series
modules have a unique connector block option to provide secure and safe
connections to your CompactRIO or NI CompactDAQ system. The table below
contains all of the connector blocks available for C Series I/O modules.
Accessory
NI 9932
NI 9933
NI 9934
NI 9935
NI 9936
The NI 9934 includes a screw-terminal connector with strain relief
as well as a D-Sub solder-cup backshell for creating custom cable
assemblies for any module with a 25-pin D-Sub connector.
Description
10-position strain relief and high-voltage screw-terminal connector kit
37-pin D-Sub connector kit with strain relief and D-Sub shell
25-pin D-Sub connector kit with strain relief and D-Sub shell
15-pin D-Sub connector kit with strain relief and D-Sub shell
10-position screw-terminal plugs (quantity 10)
Note: To meet shock and vibration requirements, you must affix ferrules to the ends of the wires on all
screw-terminal connectors.
Figure 6. NI 9934 25-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
The NI 9935 includes a screw-terminal connector with strain relief
as well as a D-Sub solder-cup backshell for creating custom cable
assemblies for any module with a 15-pin D-Sub connector.
Figure 1. cRIO-9937
Power Supply Plugs
Figure 2. cRIO-9932 Strain
Relief and High-Voltage
Connector Kit
Figure 3. cRIO-9936
10-Position ScrewTerminal Plugs
The table below lists the recommended connector block accessories
for each CompactRIO analog output module.
C Series Analog Output Module
NI 9263
NI 9265
Recommended Module Accessory
NI 9932, NI 9936
NI 9932, NI 9936
The NI 9932 kit provides strain relief and operator protection from
high-voltage signals for any 10-position screw-terminal module.
Figure 7. NI 9935 15-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
The NI 9936 consists of 10-position screw-terminal plugs for any
10-position screw-terminal module.
Figure 4. NI 9932 10-Position Strain Relief and High-Voltage Screw-Terminal Connector Kit
The NI 9933 includes a screw-terminal connector with strain relief
as well as a D-Sub solder-cup backshell for creating custom cable
assemblies for any module with a 37-pin D-Sub connector.
Figure 8. NI 9936 10-Position Screw-Terminal Plugs
Visit ni.com/compactrio or ni.com/compactdaq for up-to-date
information on availability of accessories.
Figure 5. NI 9933 37-Pin D-Sub Connector Kit with Strain Relief and D-Sub Shell
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
2
CompactRIO Ordering Information
Ordering Information
Developer Kits
NI cRIO-9961 Embedded System Developer
Hardware Evaluation Kit ..................................................779107-01
NI Reconfigurable I/O
Software Development Kit................................................779149-03
Reconfigurable Embedded Systems
Real-Time Controllers
NI cRIO-9002 ........................................................................779000-01
NI cRIO-9004 ........................................................................779055-01
Reconfigurable Chassis
NI cRIO-9101 ........................................................................779052-01
NI cRIO-9102 ........................................................................779007-01
NI cRIO-9103 ........................................................................779053-01
NI cRIO-9104 ........................................................................779054-01
Power Supplies
NI PS-1 ..................................................................................777567-01
NI PS-2
U.S. 120 VAC/Japan 100 VAC ..........................................777584-01
North American 240 VAC ..................................................777584-05
NI PS-3
U.S. 120 VAC/Japan 100 VAC ..........................................777585-01
North American 240 VAC ..................................................777585-05
NI PS-4 ..................................................................................778586-90
NI PS-5 ..................................................................................778805-90
R Series Expansion Systems
Expansion Chassis
NI cRIO-9151 chassis ............................................................779008-01
SH68-C68-S cable, 2 m ........................................................186381-02
R Series Devices
PCI
NI PCI-7811R digital I/O ........................................................779363-01
NI PCI-7813R digital I/O ........................................................779370-01
NI PCI-7830R multifunction I/O ............................................779361-01
NI PCI-7831R multifunction I/O ............................................778797-01
NI PCI-7833R multifunction I/O ............................................779359-01
PXI
NI PXI-7811R digital I/O ........................................................778800-01
NI PXI-7813R digital I/O ........................................................779362-01
NI PXI-7830R multifunction I/O ............................................779364-01
NI PXI-7831R multifunction I/O ............................................778668-01
NI PXI-7833R multifunction I/O ............................................779360-01
C Series Modules1
Analog Input Modules
NI 9201 ..................................................................................779013-01
NI 9201 with D-Sub ..............................................................779372-01
NI 9203 ..................................................................................779516-01
NI 9205 ..................................................................................779519-01
NI 9205 with D-Sub ..............................................................779357-01
NI 9206 ..................................................................................779526-01
NI 9211 ..................................................................................779001-01
NI 9215 ..................................................................................779011-01
NI 9215 with BNC..................................................................779138-01
NI 9217 ..................................................................................779592-01
NI 9221 ..................................................................................779014-01
NI 9221 with D-Sub ..............................................................779373-01
NI 9233 ..................................................................................779015-01
NI 9237 ..................................................................................779521-01
Analog Output Module
NI 9263 ..................................................................................779012-01
NI 9265 ..................................................................................779334-01
Digital Input and Counter/Timer Modules
NI 9401 ..................................................................................779351-01
NI 9411 ..................................................................................779005-01
NI 9421 ..................................................................................779002-01
NI 9421 with D-Sub ..............................................................779136-01
NI 9422 ..................................................................................779522-01
NI 9423 ..................................................................................779009-01
NI 9425 ..................................................................................779139-01
NI 9435 ..................................................................................779010-01
Digital Output and Relay Modules
NI 9401 ..................................................................................779351-01
NI 9472 ..................................................................................779004-01
NI 9472 with D-Sub ..............................................................779137-01
NI 9474 ..................................................................................779003-01
NI 9476 ..................................................................................779140-01
NI 9477 ..................................................................................779517-01
NI 9481 ..................................................................................779006-01
Accessories
NI 9912 ..................................................................................779019-01
NI 9915 ..................................................................................779018-01
NI 9917 ..................................................................................779454-01
NI 9918 ..................................................................................779455-01
NI 9932 ..................................................................................779017-01
NI 9933 ..................................................................................779103-01
NI 9934 ..................................................................................779104-01
NI 9935 ..................................................................................779016-01
NI 9936 ..................................................................................779105-01
NI 9937 ..................................................................................779106-01
NI 9939 ..................................................................................192692-01
Ethernet Cables
CAT5
5 m ....................................................................................182219-05
CAT5 Crossover
5 m ....................................................................................187375-05
OEM Discounts Available
NI offers aggressive OEM pricing discounts for high-volume OEM
applications. Contact NI for a quote.
1Visit
ni.com/compactrio for up-to-date information on module availability.
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S.) or go to ni.com/compactrio.
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
3
NI CompactDAQ Ordering Information
Ordering Information
System Chassis
NI cDAQ-9172
U.S. (120 VAC) ..................................................................779508-01
Switzerland (220 VAC) ......................................................779508-02
Australia (240 VAC) ..........................................................779508-03
Europe (240 VAC) ..............................................................779508-04
UK (240 VAC) ....................................................................779508-06
Japan (100 VAC)................................................................779508-07
C Series Modules1
Analog Input Modules
NI 9205 ..................................................................................779519-01
NI 9205 with D-Sub ..............................................................779357-01
NI 9206 ..................................................................................779526-01
NI 9211 ..................................................................................779001-01
NI 9215 ..................................................................................779011-01
NI 9215 with BNC..................................................................779138-01
NI 9233 ..................................................................................779015-01
NI 9237 ..................................................................................779521-01
Accessories
NI 9915 ..................................................................................779018-01
NI 9901 ..................................................................................779473-01
NI 9933 ..................................................................................779103-01
NI 9940 ..................................................................................779567-01
NI 9941 ..................................................................................779568-01
NI 9917 ..................................................................................779454-01
NI 9918 ..................................................................................779455-01
NI 9932 ..................................................................................779017-01
NI 9936 ..................................................................................779105-01
Academic Bundles
Standard Bundle ....................................................................777448-60
Instrumentation Bundle ........................................................777448-61
DSA (Sound and Vibration) Bundle ......................................777448-62
OEM Discounts Available
NI offers aggressive OEM pricing discounts for high-volume OEM
applications. Contact NI for a quote.
1Visit ni.com/compactrio or ni.com/compactdaq for up-to-date information
on module availability.
Analog Output Module
NI 9263 ..................................................................................779012-01
Digital Input Modules
NI 9401 ..................................................................................779351-01
NI 9421 ..................................................................................779002-01
NI 9421 with D-Sub ..............................................................779136-01
Digital Output and Relay Modules
NI 9401 ..................................................................................779351-01
NI 9472 ..................................................................................779004-01
NI 9472 with D-Sub ..............................................................779137-01
NI 9481 ..................................................................................779006-01
BUY NOW!
For complete product specifications, pricing, and accessory
information, call (800) 813 3693 (U.S.) or go to ni.com/compactdaq.
BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.)
4
NI Services and Support
SERVICE
NEEDS
NI has the services and support to meet
your needs around the globe and through
the application life cycle – from planning
and development through deployment
and ongoing maintenance. We offer
services and service levels to meet
customer requirements in research,
design, validation, and manufacturing.
Visit ni.com/services.
Training and Certification
NI training is the fastest, most certain route to productivity with our
products. NI training can shorten your learning curve, save development
time, and reduce maintenance costs over the application life cycle. We
schedule instructor-led courses in cities worldwide, or we can hold a
course at your facility. We also offer a professional certification program
that identifies individuals who have high levels of skill and knowledge on
using NI products. Visit ni.com/training.
Professional Services
Our Professional Services Team is comprised of NI applications engineers,
NI Consulting Services, and a worldwide National Instruments Alliance
Partner program of more than 600 independent consultants and
integrators. Services range from
start-up assistance to turnkey
system integration.
Visit ni.com/alliance.
OEM Support
We offer design-in consulting and product integration assistance if you
want to use our products for OEM applications. For information about
special pricing and services for OEM customers, visit ni.com/oem.
ni.com • (800) 813 3693
National Instruments • [email protected]
Local Sales and Technical Support
In offices worldwide, our staff is local to the country, giving you access
to engineers who speak your language. NI delivers industry-leading
technical support through online knowledge bases, our applications
engineers, and access to 14,000 measurement and automation
professionals within NI Developer Exchange forums. Find immediate
answers to your questions at ni.com/support.
We also offer service programs that provide automatic upgrades to
your application development environment and higher levels of technical
support. Visit ni.com/ssp.
Hardware Services
NI Factory Installation Services
NI Factory Installation Services (FIS) is the fastest and easiest way to
use your PXI or PXI/SCXI combination systems right out of the box.
Trained NI technicians install the software and hardware and configure
the system to your specifications. NI extends the standard warranty by
one year on hardware components (controllers, chassis, modules)
purchased with FIS. To use FIS, simply configure your system online with
ni.com/pxiadvisor.
Calibration Services
NI recognizes the need to maintain properly calibrated devices for
high-accuracy measurements. We provide manual calibration
procedures, services to recalibrate your products, and automated
calibration software specifically designed for use by metrology
laboratories. Visit ni.com/calibration.
Repair and Extended Warranty
NI provides complete repair services for our products. Express repair
and advance replacement services are also available. We offer
extended warranties to help you meet project life-cycle requirements.
Visit ni.com/services.
*342609A-01*
342609A-01
© 2006 National Instruments Corporation. All rights reserved. CompactRIO, National Instruments, National Instruments Alliance Partner, NI, ni.com, NI CompactDAQ,
and SCXI are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.
A National Instruments Alliance Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
2006-7079-301-101-D
Similar pages