Elantec EL5292CS-T13 Dual 600mhz current feedback amplifier Datasheet

Dual 600MHz Current Feedback Amplifier
Features
General Description
• 600MHz -3dB bandwidth
• 6mA supply current (per amplifier)
• Single and dual supply operation,
from 5V to 10V
• Single (EL5192C) and triple
(EL5392C) available
• High speed, 1GHz product
available (EL5191C)
• Low power, 4mA, 300MHz
product available (EL5193C,
EL5293C, and EL5393C
The EL5292C is a dual current feedback amplifier with a very high
bandwidth of 600MHz. This makes this amplifier ideal for today’s
high speed video and monitor applications.
Applications
Pin Configurations
•
•
•
•
•
•
With a supply current of just 6mA per amplifier and the ability to run
from a single supply voltage from 5V to 10V, the EL5292C is also
ideal for hand held, portable or battery powered equipment.
The EL5292C is offered in the industry standard 8-pin SO. The
EL5292C operates over the industrial temperature range of -40°C to
+85°C.
Video Amplifiers
Cable Drivers
RGB Amplifiers
Test Equipment
Instrumentation
Current to Voltage Converters
8-Pin SO
OUTA 1
INA- 2
Ordering Information
Part No
Package
EL5292C
EL5292C
8 VS+
+
7 OUTB
6 INB-
INA+ 3
Tape &
Reel
Outline #
EL5292CS
8-Pin SO
-
MDP0027
EL5292CS-T7
8-Pin SO
7”
MDP0027
EL5292CS-T13
8-Pin SO
13”
MDP0027
VS- 4
+
5 INB+
EL5292CS
April 26, 2001
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
Absolute Maximum Ratings (T
A
= 25°C)
Values beyond absolute maximum ratings can cause the device to be prematurely damaged. Absolute maximum ratings are stress ratings only and
functional device operation is not implied.
11V
Supply Voltage between VS+ and VSMaximum Continuous Output Current
50mA
Operating Junction Temperature
Power Dissipation
Pin Voltages
Storage Temperature
Operating Temperature
125°C
See Curves
VS- - 0.5V to VS+ +0.5V
-65°C to +150°C
-40°C to +85°C
Important Note:
All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are at the
specified temperature and are pulsed tests, therefore: TJ = TC = TA.
Electrical Characteristics
VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 375Ω for AV = 2, RL = 150Ω, TA = 25°C unless otherwise specified.
Parameter
Description
Conditions
Min
Typ
Max
Unit
AC Performance
BW
-3dB Bandwidth
AV = +1
600
MHz
AV = +2
300
MHz
25
MHz
2300
V/µs
BW1
0.1dB Bandwidth
SR
Slew Rate
VO=-2.5V to +2.5V, AV = +2
ts
0.1% Settling Time
VOUT = -2.5V to +2.5V, AV = -1
9
ns
CS
Channel Separation
f = 5MHz
60
dB
en
Input Voltage Noise
4.1
nV/√Hz
in-
IN- input current noise
20
pA/√Hz
in+
IN+ input current noise
dG
Differential Gain Error
dP
Differential Phase Error
[1]
[1]
2100
50
pA/√Hz
AV = +2
0.015
%
AV = +2
0.04
°
DC Performance
VOS
Offset Voltage
TCVOS
Input Offset Voltage Temperature Coefficient
ROL
Transimpediance
-10
Measured from TMIN to TMAX
1
10
mV
5
µV/°C
200
400
kΩ
Input Characteristics
CMIR
Common Mode Input Range
±3
±3.3
V
CMRR
Common Mode Rejection Ratio
42
50
dB
+IIN
+ Input Current
-60
3
60
µA
-IIN
- Input Current
-35
4
35
µA
RIN
Input Resistance
37
kΩ
CIN
Input Capacitance
0.5
pF
V
Output Characteristics
VO
IOUT
Output Voltage Swing
RL = 150Ω to GND
±3.4
±3.7
RL = 1KΩ to GND
±3.8
±4.0
V
Output Current
RL = 10Ω to GND
95
120
mA
Supply
IsON
Supply Current
No Load, VIN = 0V
5
6
PSRR
Power Supply Rejection Ratio
DC, VS = ±4.75V to ±5.25V
55
75
-IPSR
- Input Current Power Supply Rejection
DC, VS = ±4.75 to ±5.25V
-2
1. Standard NTSC test, AC signal amplitude = 286mVp-p, f = 3.58MHz
2
7.25
mA
2
µA/V
dB
Typical Performance Curves
Non-Inverting Frequency Response (Gain)
Non-Inverting Frequency Response (Phase)
6
90
AV=2
2
0
-2
-90
AV=1
AV=2
Phase (°)
Normalized Magnitude (dB)
AV=1
AV=5
-6
AV=5
AV=10
-180
AV=10
-10
-270
RF=750Ω
RL=150Ω
-14
1M
10M
100M
RF=750Ω
RL=150Ω
-360
1M
1G
10M
Frequency (Hz)
Inverting Frequency Response (Gain)
90
AV=-1
2
AV=-2
AV=-1
0
-2
Phase (°)
Normalized Magnitude (dB)
1G
Inverting Frequency Response (Phase)
6
AV=-5
-6
-10
-90
AV=-2
AV=-5
-180
-270
RF=375Ω
RL=150Ω
-14
1M
RF=375Ω
RL=150Ω
10M
100M
-360
1M
1G
10M
Frequency (Hz)
6
RL=150Ω
2pF added
Normalized Magnitude (dB)
6
1pF added
2
-2
-10
1M
1G
Frequency Response for Various RL
10
-6
100M
Frequency (Hz)
Frequency Response for Various CIN-
Normalized Magnitude (dB)
100M
Frequency (Hz)
0pF added
AV=2
RF=375Ω
RL=150Ω
100M
-6
-14
1M
1G
RL=500Ω
-2
-10
10M
AV=2
RF=375Ω
10M
100M
Frequency (Hz)
Frequency (Hz)
3
RL=100Ω
2
1G
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
Dual 600MHz Current Feedback Amplifier
Typical Performance Curves
Frequency Response for Various CL
Frequency Response for Various RF
14
6
10
12pF added
6
Normalized Magnitude (dB)
Normalized Magnitude (dB)
250Ω
8pF added
2
AV=2
RF=375Ω
RL=150Ω
-2
-6
1M
0pF added
10M
100M
475Ω
-2
620Ω
-6
750Ω
AV=2
RG=RF
RL=150Ω
-10
-14
1M
1G
10M
100M
1G
Frequency (Hz)
Group Delay vs Frequency
Frequency Response for Various Common-mode
Input Voltages
3.5
6
VCM=3V
2.5
Normalized Magnitude (dB)
3
Group Delay (ns)
375Ω
2
Frequency (Hz)
AV=2
RF=375Ω
2
1.5
1
AV=1
RF=750Ω
0.5
0
1M
10M
100M
-2
VCM=-3V
-6
AV=2
RF=375Ω
RL=150Ω
-10
-14
1M
1G
VCM=0V
2
10M
Frequency (Hz)
100M
1G
Frequency (Hz)
PSRR and CMRR vs Frequency
Transimpedance (ROL) vs Frequency
20
10M
0
Phase
1M
0
-180
10k
Phase (°)
100k
PSRR/CMRR (dB)
-90
Magnitude (Ω)
EL5292C
EL5292C
-270
Gain
PSRR+
-20
PSRR-40
-60
1k
CMRR
-360
100
1k
10k
100k
1M
10M
Frequency (Hz)
100M
-80
10k
1G
4
100k
1M
10M
Frequency (Hz)
100M
1G
Typical Performance Curves
-3dB Bandwidth vs Supply Voltage for Noninverting Gains
-3dB Bandwidth vs Supply Voltage for Inverting
Gains
800
350
300
600
AV=1
-3dB Bandwidth (MHz)
-3dB Bandwidth (MHz)
RF=750Ω
RL=150Ω
400
AV=2
200
AV=5
AV=10
AV=-1
250
AV=-2
200
AV=-5
150
100
RF=375Ω
RL=150Ω
50
0
0
5
6
8
7
9
5
10
6
7
Total Supply Voltage (V)
4
10
4
RF=750Ω
RL=150Ω
AV=1
RF=375Ω
RL=150Ω
AV=-1
3
Peaking (dB)
3
Peaking (dB)
9
Peaking vs Supply Voltage for Inverting Gains
Peaking vs Supply Voltage for Non-inverting Gains
2
1
AV=-2
2
1
AV=2
AV=10
AV=-5
0
0
5
6
7
8
9
10
5
6
7
-3dB Bandwidth vs Temperature for Non-inverting
Gains
9
10
-3dB Bandwidth vs Temperature for Inverting
Gains
500
1400
1200
8
Total Supply Voltage (V)
Total Supply Voltage (V)
RF=750Ω
RL=150Ω
AV=1
400
1000
-3dB Bandwidth (MHz)
-3dB Bandwidth (MHz)
8
Total Supply Voltage (V)
800
600
400
AV=5
AV=10
AV=2
RF=375Ω
RL=150Ω
AV=-1
AV=-2
300
AV=-5
200
100
200
0
-40
10
60
110
0
-40
160
10
60
Ambient Temperature (°C)
Ambient Temperature (°C)
5
110
160
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
Dual 600MHz Current Feedback Amplifier
Typical Performance Curves
Peaking vs Temperature
Voltage and Current Noise vs Frequency
1000
2
RL=150Ω
AV=1
Voltage Noise (nV/√Hz)
, Current Noise (pA/√Hz)
Peaking (dB)
1.5
1
AV=-1
0.5
AV=-2
100
in+
in-
10
en
0
AV=2
-0.5
-50
-50
0
50
1
100
10k
100k
Frequency ()
Supply Current vs Supply Voltage
100
100
10
10
8
Supply Current (mA)
Output Impedance (Ω)
Ambient Temperature (°C)
Closed Loop Output Impedance vs Frequency
1
0.1
0.01
1000
1M
10M
6
4
2
0.001
100
0
1k
10k
100k
1M
10M
100M
1G
0
2
Frequency (Hz)
2nd and 3rd Harmonic Distortion vs Frequency
4
6
8
Supply Voltage (V)
10
12
Two-tone 3rd Order
Input Referred Intermodulation Intercept (IIP3)
-20
30
AV=+2
VOUT=2VP-P
RL=100Ω
-40
-50
25
Input Power Intercept (dBm)
-30
Harmonic Distortion (dBc)
EL5292C
EL5292C
2nd Order
Distortion
-60
-70
-80
3rd Order
Distortion
-90
15
10
5
0
-5
-10
-100
1
10
Frequency (MHz)
AV=+2
RL=150Ω
20
AV=+2
RL=100Ω
-15
10
100
100
Frequency (MHz)
6
200
Typical Performance Curves
Differential Gain/Phase vs DC Input
Voltage at 3.58MHz
Differential Gain/Phase vs DC Input
Voltage at 3.58MHz
0.03
0.03
AV=2
RF=RG=375Ω
RL=150Ω
dG (%) or dP (°)
0.01
AV=1
RF=750Ω
RL=500Ω
0.02
dP
0.01
dG (%) or dP (°)
0.02
0
dG
-0.01
-0.02
0
dG
-0.01
-0.02
-0.03
-0.03
-0.04
-0.04
-0.05
-0.05
dP
-0.06
-1
-0.5
0
0.5
1
-1
-0.5
DC Input Voltage
Output Voltage Swing vs Frequency
THD<1%
0.5
1
Output Voltage Swing vs Frequency
THD<0.1%
9
10
RL=500Ω
7
RL=500Ω
RL=150Ω
6
5
4
3
2
1
8
Output Voltage Swing (VPP)
8
Output Voltage Swing (VPP)
0
DC Input Voltage
RL=150Ω
6
4
2
AV=2
AV=2
0
0
1
10
Frequency (MHz)
100
1
Small Signal Step Response
10
Frequency (MHz)
100
Large Signal Step Response
VS=±5V
RL=150Ω
AV=2
RF=RG=375Ω
VS=±5V
RL=150Ω
AV=2
RF=RG=375Ω
200mV/div
1V/div
10ns/div
10ns/div
7
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
Dual 600MHz Current Feedback Amplifier
Typical Performance Curves
Settling Time vs Settling Accuracy
Transimpedance (RoI) vs Temperature
25
500
AV=2
RF=RG=375Ω
RL=150Ω
VSTEP=5VP-P output
450
15
RoI (kΩ)
Settling Time (ns)
20
10
400
350
5
0
0.01
0.1
300
-40
1
10
Settling Accuracy (%)
110
160
110
160
ICMR and IPSR vs Temperature
90
2.5
80
PSRR
2
70
ICMR+
1.5
ICMR/IPSR (µ A/V)
PSRR/CMRR (dB)
60
Die Temperature (°C)
PSRR and CMRR vs Temperature
60
CMRR
50
40
30
IPSR
1
0.5
ICMR-
0
-0.5
20
10
-40
10
60
110
-1
-40
160
10
Die Temperature (°C)
60
Die Temperature (°C)
Input Current vs Temperature
Offset Voltage vs Temperature
60
3
40
2
Input Current (µ A)
20
VOS (mV)
EL5292C
EL5292C
1
0
IB0
-20
IB+
-40
-1
-60
-2
-40
10
60
110
-80
-40
160
10
60
Temperature (°C)
Die Temperature (°C)
8
110
160
Typical Performance Curves
Positive Input Resistance vs Temperature
Supply Current vs Temperature
50
8
45
7
40
6
Supply Current (mA)
RIN+ (kΩ)
35
30
25
20
15
5
4
3
2
10
1
5
0
-40
10
60
110
0
-40
160
10
Temperature (°C)
60
110
160
Temperature (°C)
Positive Output Swing vs Temperature for Various
Loads
Negative Output Swing vs Temperature for Various
Loads
4.2
-3.5
4.1
150Ω
-3.6
4
-3.7
3.9
-3.8
VOUT (V)
VOUT (V)
1kΩ
3.8
3.7
-3.9
1kΩ
-4
150Ω
3.6
-4.1
3.5
-40
10
50
110
-4.2
-40
160
10
Temperature (°C)
60
Output Current vs Temperature
4600
AV=2
RF=RG=375Ω
RL=150Ω
4400
4200
Sink
Slew Rate (V/µ S)
IOUT (mA)
160
Slew Rate vs Temperature
135
130
110
Temperature (°C)
125
Source
120
4000
3800
3600
3400
3200
115
-40
10
60
110
3000
-40
160
Die Temperature (°C)
10
60
Die Temperature (°C)
9
110
160
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
Dual 600MHz Current Feedback Amplifier
Typical Performance Curves
Channel-to-Channel Isolation vs Frequency
Package Power Dissipation vs Ambient Temp.
JEDEC JESD51-3 Low Effective Thermal Conductivity Test Board
0
0.7
625mW
0.6
/W
-60
0.5
C
0°
16
-40
8
SO
Power Dissipation (W)
-20
Gain (dB)
EL5292C
EL5292C
0.4
0.3
0.2
-80
0.1
-100
100k
0
1M
10M
100M
400M
0
Frequency (Hz)
25
50
75
100
Ambient Temperature (°C)
10
125
150
Pin Descriptions
EL5292C
SO8
Pin Name
1
OUTA
Function
Equivalent Circuit
Output, channel A
VS+
OUT
VSCircuit 1
2
INA-
Inverting input, channel A
VS+
IN+
IN-
VSCircuit2
3
INA+
4
VS -
Non-inverting input, channel A
(See circuit 2)
5
INB+
Non-inverting input, channel B
(See circuit 2)
6
INB-
Inverting input, channel B
(See circuit 2)
7
OUTB
Output, channel B
(See circuit 1)
8
VS +
Negative supply
Positive supply
11
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
Applications Information
Product Description
particularly for the SO package, should be avoided if
possible. Sockets add parasitic inductance and capacitance which will result in additional peaking and
overshoot.
The EL5292C is a current-feedback operational amplifier that offers a wide -3dB bandwidth of 600MHz and a
low supply current of 6mA per amplifier. The EL5292C
works with supply voltages ranging from a single 5V to
10V and they are also capable of swinging to within 1V
of either supply on the output. Because of their currentfeedback topology, the EL5292C does not have the normal gain-bandwidth product associated with voltagefeedback operational amplifiers. Instead, its -3dB bandwidth to remain relatively constant as closed-loop gain is
increased. This combination of high bandwidth and low
power, together with aggressive pricing make the
EL5292C the ideal choice for many low-power/highbandwidth applications such as portable, handheld, or
battery-powered equipment.
Capacitance at the Inverting Input
Any manufacturer’s high-speed voltage- or currentfeedback amplifier can be affected by stray capacitance
at the inverting input. For inverting gains, this parasitic
capacitance has little effect because the inverting input is
a virtual ground, but for non-inverting gains, this capacitance (in conjunction with the feedback and gain
resistors) creates a pole in the feedback path of the
amplifier. This pole, if low enough in frequency, has the
same destabilizing effect as a zero in the forward openloop response. The use of large-value feedback and gain
resistors exacerbates the problem by further lowering
the pole frequency (increasing the possibility of
oscillation.)
For varying bandwidth needs, consider the EL5191C
with 1GHz on a 9mA supply current or the EL5193C
with 300MHz on a 4mA supply current. Versions
include single, dual, and triple amp packages with 5-pin
SOT23, 16-pin QSOP, and 8-pin or 16-pin SO outlines.
The EL5292C has been optimized with a 375Ω feedback
resistor. With the high bandwidth of these amplifiers,
these resistor values might cause stability problems
when combined with parasitic capacitance, thus ground
plane is not recommended around the inverting input pin
of the amplifier.
Power Supply Bypassing and Printed Circuit
Board Layout
As with any high frequency device, good printed circuit
board layout is necessary for optimum performance.
Low impedance ground plane construction is essential.
Surface mount components are recommended, but if
leaded components are used, lead lengths should be as
short as possible. The power supply pins must be well
bypassed to reduce the risk of oscillation. The combination of a 4.7µF tantalum capacitor in parallel with a
0.01µF capacitor has been shown to work well when
placed at each supply pin.
Feedback Resistor Values
The EL5292C has been designed and specified at a gain
of +2 with RF approximately 375Ω. This value of feedback resistor gives 300MHz of -3dB bandwidth at AV=2
with 2dB of peaking. With AV=-2, an RF of 375Ω gives
275MHz of bandwidth with 1dB of peaking. Since the
EL5292C is a current-feedback amplifier, it is also possible to change the value of RF to get more bandwidth.
As seen in the curve of Frequency Response for Various
RF and RG, bandwidth and peaking can be easily modified by varying the value of the feedback resistor.
For good AC performance, parasitic capacitance should
be kept to a minimum, especially at the inverting input.
(See the Capacitance at the Inverting Input section) Even
when ground plane construction is used, it should be
removed from the area near the inverting input to minimize any stray capacitance at that node. Carbon or
Metal-Film resistors are acceptable with the Metal-Film
resistors giving slightly less peaking and bandwidth
because of additional series inductance. Use of sockets,
Because the EL5292C is a current-feedback amplifier,
its gain-bandwidth product is not a constant for different
closed-loop gains. This feature actually allows the
EL5292C to maintain about the same -3dB bandwidth.
As gain is increased, bandwidth decreases slightly while
stability increases. Since the loop stability is improving
12
with higher closed-loop gains, it becomes possible to
reduce the value of RF below the specified 375Ω and
still retain stability, resulting in only a slight loss of
bandwidth with increased closed-loop gain.
EL5292C has dG and dP specifications of 0.03% and
0.05°, respectively.
Output Drive Capability
In spite of its low 6mA of supply current, the EL5292C
is capable of providing a minimum of ±95mA of output
current. With a minimum of ±95mA of output drive, the
EL5292C is capable of driving 50Ω loads to both rails,
making it an excellent choice for driving isolation transformers in telecommunications applications.
Supply Voltage Range and Single-Supply
Operation
The EL5292C has been designed to operate with supply
voltages having a span of greater than 5V and less than
10V. In practical terms, this means that the EL5292C
will operate on dual supplies ranging from ±2.5V to
±5V. With single-supply, the EL5292C will operate
from 5V to 10V.
Driving Cables and Capacitive Loads
When used as a cable driver, double termination is
always recommended for reflection-free performance.
For those applications, the back-termination series resistor will decouple the EL5292C from the cable and allow
extensive capacitive drive. However, other applications
may have high capacitive loads without a back-termination resistor. In these applications, a small series resistor
(usually between 5Ω and 50Ω) can be placed in series
with the output to eliminate most peaking. The gain
resistor (RG) can then be chosen to make up for any gain
loss which may be created by this additional resistor at
the output. In many cases it is also possible to simply
increase the value of the feedback resistor (RF) to reduce
the peaking.
As supply voltages continue to decrease, it becomes necessary to provide input and output voltage ranges that
can get as close as possible to the supply voltages. The
EL5292C has an input range which extends to within 2V
of either supply. So, for example, on ±5V supplies, the
EL5292C has an input range which spans ±3V. The output range of the EL5292C is also quite large, extending
to within 1V of the supply rail. On a ±5V supply, the
output is therefore capable of swinging from -----4V to
+4V. Single-supply output range is larger because of the
increased negative swing due to the external pull-down
resistor to ground.
Video Performance
Current Limiting
For good video performance, an amplifier is required to
maintain the same output impedance and the same frequency response as DC levels are changed at the output.
This is especially difficult when driving a standard video
load of 150Ω, because of the change in output current
with DC level. Previously, good differential gain could
only be achieved by running high idle currents through
the output transistors (to reduce variations in output
impedance.) These currents were typically comparable
to the entire 6mA supply current of each EL5292C
amplifier. Special circuitry has been incorporated in the
EL5292C to reduce the variation of output impedance
with current output. This results in dG and dP specifications of 0.015% and 0.04°, while driving 150Ω at a gain
of 2.
The EL5292C has no internal current-limiting circuitry.
If the output is shorted, it is possible to exceed the Absolute Maximum Rating for output current or power
dissipation, potentially resulting in the destruction of the
device.
Power Dissipation
With the high output drive capability of the EL5292C, it
is possible to exceed the 125°C Absolute Maximum
junction temperature under certain very high load current conditions. Generally speaking when RL falls below
about 25Ω, it is important to calculate the maximum
junction temperature (TJMAX ) for the application to
determine if power supply voltages, load conditions, or
package type need to be modified for the EL5292C to
Video performance has also been measured with a 500Ω
load at a gain of +1. Under these conditions, the
13
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
remain in the safe operating area. These parameters are
calculated as follows:
T JMA X = T MA X + ( θ JA × n × PD MA X )
where:
70$; 0D[LPXP$PELHQW7HPSHUDWXUH
θ-$ 7KHUPDO5HVLVWDQFHRIWKH3DFNDJH
Q 1XPEHURI$PSOLILHUVLQWKH3DFNDJH
3'0$; 0D[LPXP3RZHU'LVVLSDWLRQRI(DFK
$PSOLILHULQWKH3DFNDJH
PDMAX for each amplifier can be calculated as follows:
V OU T MAX
PD MA X = ( 2 × V S × I SMA X ) + ( V S – V OU T MAX ) × ---------------------------RL
where:
96 6XSSO\9ROWDJH
,60$; 0D[LPXP6XSSO\&XUUHQWRI$
92870$; 0D[LPXP2XWSXW9ROWDJH 5HTXLUHG
5/ /RDG5HVLVWDQFH
14
EL5292C
EL5292C
Dual 600MHz Current Feedback Amplifier
General Disclaimer
Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described
herein and makes no representations that they are free from patent infringement.
April 26, 2001
WARNING - Life Support Policy
Elantec, Inc. products are not authorized for and should not be used
within Life Support Systems without the specific written consent of
Elantec, Inc. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used
in accordance with instructions provided can be reasonably
expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support
Systems are requested to contact Elantec, Inc. factory headquarters
to establish suitable terms & conditions for these applications. Elantec, Inc.’s warranty is limited to replacement of defective
components and does not cover injury to persons or property or
other consequential damages.
Elantec Semiconductor, Inc.
675 Trade Zone Blvd.
Milpitas, CA 95035
Telephone: (408) 945-1323
(888) ELANTEC
Fax:
(408) 945-9305
European Office: +44-118-977-6020
Japan Technical Center: +81-45-682-5820
15
Printed in U.S.A.
Similar pages