NTE NTE6037 Silicon power rectifier diode, 85 amp Datasheet

NTE6036 & NTE6037
Silicon Power Rectifier Diode, 85 Amp
Features:
D Short Reverse Recovery Time
D Low Stored Charge
D Available in Cathode–to–Case (NTE6036) or Anode–to–Case (NTE6037) Style
Ratings and Characteristics:
Average Forward Current (TC = +75°C Max), IF(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85A
Maximum Repetitive Peak Reverse Voltage (TJ = –40° to +125°C), VRRM . . . . . . . . . . . . . . . . . 600V
Maximum Non–Repetitive Peak Reverse Voltage (TJ = +25° to +125°C, tp ≤ 5ms), VRSM . . . 700V
Maximum Reverse Current (At Rated VR), IR
TJ = +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1mA
TJ = +125°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Maximum Forward Surge Current, IFSM
50Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1100A
60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1151A
Fusing Current, I2t
50Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6050A2s
60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5523A2s
Fusing Current, I2pt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85560A2ps
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C
Storage Temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C
Thermal Resistance, Junction–to–Case (DC Operation), RthJC . . . . . . . . . . . . . . . . . . . . . . 0.30°C/W
Thermal Resistance, Case–to–Sink (Surface flat, smooth, and greased), RthCS . . . . . . . . 0.25°C/W
Maximum Mounting Torque (Non–lubricated threads), T . . . . . . . . . . . . . . . . . . . 22 (2.5) in•lb (m•N)
Electrical Specifications:
Parameter
Symbol
Test Conditions
Maximum Average Forward Current
IF (AV)
180° sinusoidal condition, TC = +75°C Max
Maximum Peak One–Cycle
Non–Repetitive Surge Current
IFSM
t = 10ms
t = 8.3ms
t = 10ms
t = 8.3ms
Maximum I2t for Fusing
I2t
t = 10ms
t = 8.3ms
Maximum I2t for Individual Device
Fusing
t = 10ms
t = 8.3ms
Rating
Unit
85
A
Half sinewave current, rated VRRM
°
reapplied, initial TJ = +125°C
1100
A
1151
A
Half sinewave current, no voltage
°
reapplied, initial TJ = +125°C
1308
A
1369
A
Rated VRRM reapplied, initial
°
TJ = +125°C
6050
A2s
5523
A2s
No voltage reapplied, initial
°
TJ = +125°C
8556
A2s
7810
A2s
85560
A2pt
Maximum I2pt
I2pt
t = 0.1 to 10ms, no voltage reapplied, Note 1
Maximum Peak Forward Voltage
VFM
TJ = +25°C, IFM = 267A
1.75
V
TJ = +25°C, IF = 1A to VR = 30V, –dIF/dt = 100A/µs
120
ns
TJ = +25°C, IF = 267A, –dIF/dt = 25A/µs
500
ns
TJ = +25°C, IF = 1A to VR = 30V, –dIF/dt = 100A/µs
340
nC
TJ = +25°C, IF = 267A, –dIF/dt = 25A/µs
1300
nC
Maximum Reverse Recovery Time
trr
Maximum Reverse Recovery Charge
QRR
Note 1. I2t for time tx = I2pt • ptx.
.687
(17.4)
Max
.667 (16.9) Dia Max
.375 (9.55) Max
1.289
(32.7)
Max
.140 (3.65) Dia Max
.450
(11.4)
Max
.450 (11.4) Max
.453
(11.5)
Max
1/4–28 UNF–2A
Similar pages