KBPC6 / BR6 Series Glass Passivated Single-Phase Bridge Rectifiers Voltage Range 50 to 1000 Volts Forward Current 6.0 Amperes Features Surge overload rating - 125 Amperes peak Low forward voltage drop Small size, simple installation Sliver plasted copper leads Mounting Position: Any Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols B R 605 B R 61 B R 62 B R 64 B R 66 B R 68 B R 610 KBPC6005 KBPC601 KBPC602 KBPC604 KBPC606 KBPC608 KBPC610 Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts V DC 50 100 200 400 600 800 1000 Volts Maximum DC blocking voltage Maximum average forward rectified output current at TC=100oC (Note 1) TA=50oC (Note 2) IF(AV) 6.0 3.0 Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125.0 Amps Max. instantaneous forward voltage drop per element at 1.5A VF 1.0 Volt IR 10.0 1.0 uA mA TJ -55 to +125 o C TSTG -55 to +150 o C Maximum DC reverse current at rated DC blocking voltage per element Operating temperature range Storage temperature range Notes: TA=25oC TA=100oC 1. Unit mounted on metal chassis 2. Unit mounted on P.C. board 642 Amps RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 643