ADPOW APT60S20B High voltage schottky diode Datasheet

1
2
TO
-24
7
1 - Cathode
2 - Anode
Back of Case - Cathode
D3PAK
1
2
APT60S20B
APT60S20S
200V
200V
75A
75A
2
1
HIGH VOLTAGE SCHOTTKY DIODE
PRODUCT APPLICATIONS
PRODUCT FEATURES
PRODUCT BENEFITS
• Parallel Diode
• Ultrafast Recovery Times
• Low Losses
• Soft Recovery Characteristics
• Low Noise Switching
• Popular TO-247 Package or
• Cooler Operation
• Low Forward Voltage
• Higher Reliability Systems
• High Blocking Voltage
• Increased System Power
•
•
•
•
•
-Switchmode Power Supply
-Inverters
Free Wheeling Diode
-Motor Controllers
-Converters
Snubber Diode
Uninterruptible Power Supply (UPS)
48 Volt Output Rectifiers
High Speed Rectifiers
Surface Mount D3PAK Package
• Low Leakage Current
MAXIMUM RATINGS
Symbol
VR
All Ratings: TC = 25°C unless otherwise specified.
Characteristic / Test Conditions
Maximum Peak Repetitive Reverse Voltage
VRWM
Maximum Working Peak Reverse Voltage
IF(AV)
Maximum Average Forward Current (TC = 123°C, Duty Cycle = 0.5)
IFSM
TJ,TSTG
APT60S20B_S
UNIT
200
Volts
Maximum D.C. Reverse Voltage
VRRM
IF(RMS)
Density
75
RMS Forward Current (Square wave, 50% duty)
208
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
600
Amps
-55 to 150
Operating and StorageTemperature Range
TL
Lead Temperature for 10 Sec.
300
EVAL
Avalanche Energy (2A, 30mH)
60
°C
mJ
STATIC ELECTRICAL CHARACTERISTICS
Forward Voltage
IRM
Maximum Reverse Leakage Current
CT
Junction Capacitance, VR = 200V
TYP
MAX
IF = 60A
.83
.90
IF = 120A
.98
IF = 60A, TJ = 125°C
.72
VR = VR Rated
APT Website - http://www.advancedpower.com
Volts
1
VR = VR Rated, TJ = 125°C
25
300
UNIT
mA
pF
9-2004
VF
MIN
053-6042 Rev C
Symbol
DYNAMIC CHARACTERISTICS
APT60S20B_S
Characteristic
Symbol
Test Conditions
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
MIN
TYP
-
55
ns
-
160
nC
-
5
-
100
ns
-
490
nC
-
10
-
80
ns
-
1100
nC
-
27
Amps
MIN
TYP
IF = 60A, diF/dt = -200A/µs
VR = 133V, TC = 25°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 60A, diF/dt = -200A/µs
VR = 133V, TC = 125°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 60A, diF/dt = -700A/µs
VR = 133V, TC = 125°C
Maximum Reverse Recovery Current
MAX
-
-
UNIT
Amps
Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
Characteristic / Test Conditions
MAX
RθJC
Junction-to-Case Thermal Resistance
.30
RθJA
Junction-to-Ambient Thermal Resistance
40
WT
Package Weight
Torque
oz
5.9
g
10
lb•in
1.1
N•m
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.30
0.9
0.25
0.7
0.20
0.3
0.10
0.05
0
Note:
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
0.35
0.5
Duty Factor D = t1/t2
SINGLE PULSE
Peak TJ = PDM x ZθJC + TC
0.05
10-5
10-4
10-3
10-2
10-1
1.0
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
RC MODEL
9-2004
Junction
temp (°C)
053-6042 Rev C
t1
t2
0.1
Power
(watts)
0.0218 °C/W
0.00450 J/°C
0.119 °C/W
0.0119 J/°C
0.160 °C/W
0.121 J/°C
Case temperature (°C)
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
°C/W
0.22
Maximum Mounting Torque
0.15
UNIT
TYPICAL PERFORMANCE CURVES
TJ = 25°C
140
120
100
80
60
TJ = 125°C
40
TJ = 150°C
20
0.2
0.4
0.6
0.8
1
1.2
VF, ANODE-TO-CATHODE VOLTAGE (V)
Figure 2. Forward Current vs. Forward Voltage
Qrr, REVERSE RECOVERY CHARGE
(nC)
1800
1400
120A
1200
1000
60A
800
600
30A
400
200
0
0
200
400
600
800
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change
Kf, DYNAMIC PARAMETERS
(Normalized to 700A/µs)
1.2
IRRM
0.8
80
60
30A
40
20
TJ = 125°C
VR = 133V
30
120A
25
20
60A
15
10
30A
5
0
0
200
400
600
800
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 5. Reverse Recovery Current vs. Current Rate of Change
250
Duty cycle = 0.5
TJ = 150°C
200
Qrr
trr
0.6
60A
0
200
400
600
800
-diF /dt, CURRENT RATE OF CHANGE(A/µs)
Figure 3. Reverse Recovery Time vs. Current Rate of Change
trr
Qrr
1.0
120A
100
35
TJ = 125°C
VR = 133V
1600
TJ = 125°C
VR = 133V
0
0
IRRM, REVERSE RECOVERY CURRENT
(A)
0
IF(AV) (A)
IF, FORWARD CURRENT
(A)
160
trr, REVERSE RECOVERY TIME
(ns)
TJ = -55°C
180
APT60S20B_S
120
200
150
100
0.4
0.0
Lead Temperature
Limited
50
0.2
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature
0
25
50
75
100
125
150
Case Temperature (°C)
Figure 7. Maximum Average Forward Current vs. CaseTemperature
4000
3000
9-2004
2000
1000
0
.3
1
10
100
200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
053-6042 Rev C
CJ, JUNCTION CAPACITANCE
(pF)
5000
APT60S20B_S
Vr
diF /dt Adjust
+18V
APT20M36BLL
0V
D.U.T.
30µH
trr/Qrr
Waveform
PEARSON 2878
CURRENT
TRANSFORMER
Figure 9. Diode Test Circuit
1
IF - Forward Conduction Current
2
diF /dt - Rate of Diode Current Change Through Zero Crossing.
3
IRRM - Maximum Reverse Recovery Current.
4
trr - Reverse Recovery Time, measured from zero crossing where diode
current goes from positive to negative, to the point at which the straight
line through IRRM and 0.25 IRRM passes through zero.
5
1
4
Zero
5
0.25 IRRM
3
2
Qrr - Area Under the Curve Defined by IRRM and trr.
Figure 10, Diode Reverse Recovery Waveform and Definitions
3
TO-247 Package Outline
D PAK Package Outline
15.49 (.610)
16.26 (.640)
6.15 (.242) BSC
5.38 (.212)
6.20 (.244)
Cathode
9-2004
4.90 (.193)
5.10 (.201)
1.45 (.057)
1.60 (.063)
20.80 (.819)
21.46 (.845)
0.40 (.016)
0.79 (.031)
19.81 (.780)
20.32 (.800)
15.85 (.624)
16.05 (.632)
0.40 (.016)
0.65 (.026)
1.65 (.065)
2.13 (.084)
1.01 (.040)
1.40 (.055)
1.00 (.039)
1.15 (.045)
12.40 (.488)
12.70 (.500)
0.020 (.001)
0.250 (.010)
2.70 (.106)
2.90 (.114)
1.15 (.045)
1.45 (.057)
1.20 (.047)
1.90 (.075) 1.40 (.055)
2.10 (.083)
5.45 (.215) BSC
(2 Plcs.)
Anode
2.21 (.087)
2.59 (.102)
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
13.30 (.524)
13.60 (.535)
18.70 (.736)
19.10 (.752)
3.50 (.138)
3.81 (.150)
4.50 (.177) Max.
053-6042 Rev C
Cathode
(Heat Sink)
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
2.40 (.094)
2.70 (.106)
(Base of Lead)
Heat Sink (Cathode)
and Leads
are Plated
Anode
Cathode
Dimensions in Millimeters (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
Similar pages