GE DF06S Miniature glass passivated single-phase surface mount bridge rectifier Datasheet

DF005S THRU DF10S
MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT
BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
FEATURES
Case Style DFS
0.047 (1.20)
0.040 (1.02)
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ This series is UL recognized under Component Index, file
number E54214
♦ Glass passivated chip junctions
♦ High surge overload rating-50 amperes peak
♦ Ideal for printed circuit boards
♦ High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
0.205 (5.2)
0.195 (5.0)
0.404 (10.3)
0.386 (9.80)
0.335 (8.51)
0.320 (8.13)
45o
0.255 (6.5)
0.245 (6.2)
MECHANICAL DATA
0.013 (0.330)
0.130 (3.3)
0.009 (0.241)
0.120 (3.05)
0.060 (1.524)
0.040 (1.016)
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on body
Mounting Position: Any
Weight: 0.04 ounce, 1.0 gram
0.013 (0.330)
0.003 (0.076)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
DF
005S
DF
01S
DF
02S
DF
04S
DF
06S
DF
08S
DF
10S
UNITS
100
200
400
600
800
1000
Volts
Maximum repetitive peak reverse voltage
VRRM
50
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum average forward output rectified current
at TA=40°C (NOTE 2)
I(AV)
1.0
Amp
Peak forward surge current single half sine-wave
superimposed on rated load (JEDEC Method) TJ=150°C
IFSM
50.0
Amps
Rating for fusing (t < 8.3ms)
I2t
10.0
A2sec
Maximum instantaneous forward voltage drop
per leg at 1.0A
VF
1.1
Volts
Maximum DC reverse current
at rated DC blocking voltage per leg
IR
5.0
500
µA
CJ
25.0
pF
RΘJA
RΘJL
40.0
15.0
°C/W
-55 to +150
°C
TA=25°C
TA=125°C
Typical junction capacitance per leg (NOTE 1)
Typical thermal resistance per leg (NOTE 2)
Operating junction and storage temperature range TJ, TSTG
NOTES:
(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Units mounted on P.C.B. with 0.51 x 0.51” (13 x 13mm) copper pads
4/98
RATINGS AND CHARACTERISTICS CURVES DF005S THRU DF10S
FIG.1 - DERATING CURVE OUTPUT RECTIFIED
CURRENT
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT PER LEG
60 HZ
RESISTIVE OR INDUCTIVE LOAD
0.5
P.C.B. MOUNTED ON
0.51 x 0.51” (13 x 13mm) COPPER PADS
0
20
40
60
80
100
120
140
60
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
1.0
TJ=150°C
SINGLE SINE-WAVE
(JEDEC Method)
50
40
30
1.0 CYCLE
20
10
0
160
1
10
AMBIENT TEMPERATURE, °C
FIG. 4 - TYPICAL REVERSE LEAKAGE
CHARACTERISTICS PER LEG
FIG. 3 - TYPICAL FORWARD CHARACTERISTICS
PER LEG
100
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
10
1
0.1
0.01
0.4
0.6
0.8
1.0
1.2
1.4
TRANSIENT THERMAL IMPEDANCE,
°C/W
JUNCTION CAPACITANCE, pF
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
10
REVERSE VOLTAGE, VOLTS
0.1
TJ=25°C
0
20
40
60
80
100
FIG. 6 - TYPICAL TRANSIENT THERMAL
IMPEDANCE
100
10
1
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FIG. 5 -TYPICAL JUNCTION CAPACITANCE
1
TJ=125°C
10
0.01
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
1
100
NUMBER OF CYCLES AT 60 Hz
100
100
10
1
0.1
0.01
0.1
1
t, HEATING TIME, sec.
10
100
Similar pages