WTE DD350S 35a glass passivated dish type press-fit diode Datasheet

DD350/S – DD356/S
WTE
POWER SEMICONDUCTORS
Pb
35A GLASS PASSIVATED DISH TYPE PRESS-FIT DIODE
Features
!
Glass Passivated Die Construction
!
!
!
!
!
Low Leakage
Low Cost
High Surge Current Capability
Low Forward
C-Band Terminal Construction
C
Anode +
D
Mechanical Data
B
!
!
!
!
!
!
Case: 8.4mm or 9.5mm Dish Type Press-Fit
with Silicon Rubber Sealed on Top
Terminals: Contact Areas Readily Solderable
Polarity: Cathode to Case (Reverse Units Are
Available Upon Request and Are Designated
By A “R” Suffix, i.e. DD350R or DD350SR)
Polarity: White Color Equals Standard,
Black Color Equals Reverse Polarity
Mounting Position: Any
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 2
A
Dim
A
B
C
D
8.4mm Dish
9.5mm Dish
Min
Max
Min
Max
8.25
8.45
9.30
9.70
2.00
2.40
2.0
2.40
1.50 Ø Typical
17.50
—
17.50
—
All Dimensions in mm
“S” Suffix Designates 8.4mm Dish
No Suffix Designates 9.5mm Dish
Maximum Ratings and Electrical Characteristics
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current @TC = 150°C
DD350/ DD351/ DD352/ DD353/ DD354/ DD355/ DD356/
S
S
S
S
S
S
S
Unit
VRRM
VRWM
VR
50
100
200
300
400
500
600
V
VR(RMS)
35
70
140
210
280
350
420
V
IO
35
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
400
A
Forward Voltage
@IF = 35A
VFM
1.0
V
@TA = 25°C
@TA = 100°C
IRM
5.0
500
µA
Cj
300
pF
RJC
1.0
°C/W
TJ, TSTG
-65 to +175
°C
Peak Reverse Current
At Rated DC Blocking Voltage
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
DD350/S – DD356/S
1 of 2
© 2006 Won-Top Electronics
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
DD350
9.5mm Dish Press-Fit
2000 Units/Box
DD350S
8.4mm Dish Press-Fit
2000 Units/Box
DD351
9.5mm Dish Press-Fit
2000 Units/Box
DD351S
8.4mm Dish Press-Fit
2000 Units/Box
DD352
9.5mm Dish Press-Fit
2000 Units/Box
DD352S
8.4mm Dish Press-Fit
2000 Units/Box
DD353
9.5mm Dish Press-Fit
2000 Units/Box
DD353S
8.4mm Dish Press-Fit
2000 Units/Box
DD354
9.5mm Dish Press-Fit
2000 Units/Box
DD354S
8.4mm Dish Press-Fit
2000 Units/Box
DD355
9.5mm Dish Press-Fit
2000 Units/Box
DD355S
8.4mm Dish Press-Fit
2000 Units/Box
DD356
9.5mm Dish Press-Fit
2000 Units/Box
DD356S
8.4mm Dish Press-Fit
2000 Units/Box
1.
2.
Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
To order Lead Free version (with Lead Free finish), add “-LF” suffix to part
number above. For example, DD350-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
We power your everyday.
DD350/S – DD356/S
2 of 2
© 2006 Won-Top Electronics
Similar pages