Minmax MSLU302 Dc/dc converter 1w, high isolation,smd-package Datasheet

MSLU300 SERIES
DC/DC CONVERTER 1W, High Isolation,SMD-Package
FEATURES
►Industrial SMD Package
►I/O Isolation 3000 VDC
►Operating Ambient Temp. Range -40°C to +90°C
►Water-washable Process Available(option)
►Qualified for Lead-free Reflow Solder Process
According to IPC/JEDEC J-STD-020D.1
►Tape & Reel Package Available
PRODUCT OVERVIEW
The MINMAX MSLU300 series is a range of 1W DC/DC converters in a SMD- Package featuring high I/O-isolation of 3000VDC.The very small footprint
makes this product the ideal solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination,in digital
interfaces or where a converted voltage is required.
An excellent efficiency allows an operating temperature range of–40°C to +85°C. With a new package design these converters are fully qualified for the
higher temperature profile used in lead-free reflow solder processes. For automated SMD production lines the product can be supplied in tape& reel
package.
Model Selection Guide
Model
Number
MSLU301
MSLU302
MSLU304
MSLU305
MSLU306
MSLU308
MSLU309
MSLU311
MSLU312
MSLU314
MSLU315
MSLU316
MSLU318
MSLU319
MSLU321
MSLU322
MSLU324
MSLU325
MSLU326
MSLU328
MSLU329
Input
Voltage
(Range)
Output
Voltage
VDC
VDC
3.3
5
12
15
±5
±12
±15
3.3
5
12
15
±5
±12
±15
3.3
5
12
15
±5
±12
±15
5
(4.5 ~ 5.5)
12
(10.8 ~ 13.2)
24
(21.6 ~ 26.4)
Output Current
Input Current
Load
Regulation
Max.
Min.
@Max. Load
@No Load
mA
260
200
84
67
±100
±42
±34
260
200
84
67
±100
±42
±34
260
200
84
67
±100
±42
±34
mA
5
4
2
1.5
±2
±0.8
±0.7
5
4
2
1.5
±2
±0.8
±0.7
5
4
2
1.5
±2
±0.8
±0.7
mA(typ.)
238
267
255
251
267
255
255
98
110
105
103
110
105
106
51
57
53
53
57
53
54
mA(typ.)
30
15
8
Max. capacitive
Load
Efficiency
(typ.)
@Max. Load
% (max.)
10
10
7
7
10
7
7
10
8
5
5
8
5
5
10
8
5
5
8
5
5
μF
33
33
4.7
4.7
10#
2.2#
2.2#
33
33
4.7
4.7
10#
2.2#
2.2#
33
33
4.7
4.7
10#
2.2#
2.2#
# For each output
%
72
75
79
80
75
79
80
73
76
80
81
76
80
80
70
73
79
79
73
79
79
Input Specifications
Parameter
Model
5V Input Models
12V Input Models
24V Input Models
5V Input Models
12V Input Models
24V Input Models
All Models
Input Voltage Range
Input Surge Voltage (1 sec. max.)
Input Filter
E-mail:[email protected]
2016/07/11
REV:12
Tel:886-6-2923150
Page 1 of 5
Min.
4.5
10.8
21.6
-0.7
-0.7
-0.7
Typ.
Max.
5
5.5
12
13.2
24
26.4
--9
--18
--30
Internal Capacitor
Unit
VDC
MSLU300 SERIES
DC/DC CONVERTER 1W, High Isolation,SMD-Package
Output Specifications
Parameter
Output Voltage Balance
Line Regulation
Load Regulation
Ripple & Noise
Temperature Coefficient
Short Circuit Protection
Conditions
Dual Output, Balanced Loads
For Vin Change of 1%
Io=20% to 100%
0-20 MHz Bandwidth
Min.
-----
Typ.
Max.
±0.1
±1.0
±1.2
±1.5
See Model Selection Guide
----100
--±0.01
±0.02
0.5 Second Max., Automatic Recovery
Unit
%
%
mV P-P
%/℃
General Specifications
Parameter
Conditions
Min.
Typ.
Max.
Unit
60 Seconds
3000
---
---
VDC
I/O Isolation Resistance
500 VDC
10
---
---
GΩ
I/O Isolation Capacitance
100KHz, 1V
---
60
100
pF
50
100
150
KHz
I/O Isolation Voltage
Switching Frequency
MTBF (calculated)
MIL-HDBK-217F@25℃, Ground Benign
Moisture Sensitivity Level (MSL)
2,000,000
IPC/JEDEC J-STD-020D.1
Hours
Level 2
Environmental Specifications
Parameter
Operating Ambient Temperature Range
(See Power Derating Curve)
Case Temperature
Storage Temperature Range
Humidity (non condensing)
Cooling
Lead-free Reflow Solder Process
Conditions
Min.
Max.
Unit
Natural Convection
-40
+85
℃
+90
+125
95
℃
℃
% rel. H
---50
--Natural Convection
IPC/JEDEC J-STD-020D.1
+20%
+20%
+20%
+20%
+15%
+15%
+15%
+15%
+10%
+10%
+10%
Max.
+5%
+5%
Typ.
Vnom
Vnom
Min.
-5%
-5%
-10%
0%
20%
40%
60%
80%
Output Load Current (%)
(3.3V & 5V Output)
E-mail:[email protected]
2016/07/11
REV:12
Tel:886-6-2923150
Page 2 of 5
-10%
100%
Output Voltage(%)
Output Voltage(%)
Output Voltage Tolerance
+10%
Max.
+5%
+5%
Typ.
Vnom
Vnom
Min.
-5%
-5%
-10%
0%
20%
40%
60%
Output Load Current (%)
(All other Output)
80%
-10%
100%
MSLU300 SERIES
DC/DC CONVERTER 1W, High Isolation,SMD-Package
Power Derating Curve
100
Natural
Convection
20LFM
Output Power (%)
80
400LFM
60
40
20
0
~
-40
0
20
40
60
100 110
80
Ambient Temperature ℃
Notes
1
2
3
4
5
6
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these
modules; however they may not meet all specifications listed.
We recommend to protect the converter by a fast blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
6
5.08
[0.2]
5.08
[0.2]
2.54
[0.1]
0~
R
1.8
[0.07]
( Magnification of A )
8.0 [0.31]
5
0.
5
3
16.3 [0.64]
7.7 [0.3]
0.3
[0.01]
8.0 0.5
[0.31 0.02]
1.2 [0.05]
0.60 [0.02]
S
5.5
[0.22]
5.5
[0.22]
5.08 [0.20]
SEATING PLANE
A
1.5 0.1
[0.06 0.004]
12.4 [0.49]
2
1
2.2
[0.09]
7
10.2 [0.40]
8
0.25 [0.01]
10
Top View
2.54 [0.10]
4°
11
11.0 0.2
[0.43 0.008]
12
12.7 [0.50]
1.0[ 0.04]
8.0 [0.31]
3.0
[0.12]
3.0
[0.12]
Connecting Pin Patterns
►All dimensions in mm (inches)
1.5 0.1
[0.06 0.004]
►Tolerance: X.X±0.25 (X.XX±0.01)
0.1
X.XX±0.13 ( X.XXX±0.005)
S
►Pins ±0.05 (±0.002)
Pin Connections
Pin
Single Output
Dual Output
1
-Vin
-Vin
2
+Vin
+Vin
3
NA
NA
5
-Vout
Common
6
NA
-Vout
7
NA
NA
8
+Vout
+Vout
10
NA
NA
11
NA
NA
12
NA
NA
NA : Not Available for Electrical Connection
E-mail:[email protected]
2016/07/11
REV:12
Tel:886-6-2923150
Page 3 of 5
Physical Characteristics
Case Size
:
16.3x8.0x7.7mm (0.64x0.31x0.30 inches)
Case Material
:
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
:
Phosphor Bronze
Weight
:
2g
MSLU300 SERIES
DC/DC CONVERTER 1W, High Isolation,SMD-Package
Order Code Table
E-mail:[email protected]
2016/07/11
REV:12
Standard
For water-washable process
MSLU301
MSLU301-W
MSLU302
MSLU302-W
MSLU304
MSLU304-W
MSLU305
MSLU305-W
MSLU306
MSLU306-W
MSLU308
MSLU308-W
MSLU309
MSLU309-W
MSLU311
MSLU311-W
MSLU312
MSLU312-W
MSLU314
MSLU314-W
MSLU315
MSLU315-W
MSLU316
MSLU316-W
MSLU318
MSLU318-W
MSLU319
MSLU319-W
MSLU321
MSLU321-W
MSLU322
MSLU322-W
MSLU324
MSLU324-W
MSLU325
MSLU325-W
MSLU326
MSLU326-W
MSLU328
MSLU328-W
MSLU329
MSLU329-W
Tel:886-6-2923150
Page 4 of 5
MSLU300 SERIES
DC/DC CONVERTER 1W, High Isolation,SMD-Package
Test Setup
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.33μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between
50 mm and 75 mm from the DC/DC Converter.
+Vin
+Out
Copper Strip
Single Output
DC / DC
Converter
-Vin
Scope
Cout
-Out
Resistive
Load
Copper Strip
+Vin
+Out
Copper Strip
Dual Output
DC / DC
Converter
Com.
Copper Strip
-Vin
-Out
Scope
Cout
Resistive
Load
Cout
Scope
Copper Strip
Technical Notes
Maximum Capacitive Load
The MSLU300 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up,
affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module.
In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR <
1.0Ω at 100 KHz) capacitor of a 2.2μF for the 5V input devices, a 1.0μF for the 12V input devices and a 0.47μF for the 24V devices.
+
DC Power
Source
+Vin
+
+Out
DC / DC
Converter
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is
recommended to use 1.0μF capacitors at the output.
+
+Vin
DC Power
Source
-
+Out
Single Output
DC / DC
Converter
-Vin
+
Cout
Load
-Out
Dual Output
Com.
DC / DC
Converter
DC Power
Source
-
+Out
+Vin
-Vin
-Out
Cout
Load
Load
Cout
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from
measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
15mm / 0.6in
50mm / 2in
Air Flow
DUT
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
Minmax Technology Co., Ltd.
2016/07/11
REV:12
Page 5 of 5
Similar pages