AZETTLER AZ932-1CH-18D 15 amp miniature pc board relay Datasheet

AZ
AZ932
15 AMP
MINIATURE
PC BOARD RELAY
FEATURES
•
•
•
•
•
•
High performance
Low seated height
Flux tight and sealed versions available
Class F insulation (155°C) system available
Class B Insulation (130°C) standard
UL, CUR file E43203
GENERAL DATA
CONTACTS
Arrangement
Ratings
Rated Load
UL/CUR
SPST (1 Form A)
SPST NC (1 Form B)
SPDT (1 Form C)
Form A, B and C
Max. switched power: 210 W or 2400 VA
Max. switched current: 15 A AC, 7 A DC
Max. switched voltage: 30 VDC or 300 VAC
1 Form A
15 A at 120 VAC
TV - 5 120 VAC
Life Expectancy
Mechanical
Electrical
1x106
1 x 105 at 10 A 120 VAC Res.
Operate Time
10 ms max.
Release Time
5 ms max.
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms across contacts
Insulation Resistance
100 megohms min. at 500 VDC,
50% RH
1 Form B NC
8.3 A at 120 VAC
3.6 A at 277 VAC
1000 VA, 90°C Ballast
1 Form B NC
15 A at 120 VAC
6.5 A at 277 VAC
1800 VA, 25° C Ballast
Dropout
Greater than 10% of nominal coil voltage
Vibration
0.062" DA at 10–55 Hz
1 Form C
10 A at 120 VAC 100,000 cycles N.O.
10 A at 120 VAC 50,000 cycles N.C.
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
10 g
Material
Silver tin oxide (gold plating available)
Resistance
< 100 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Ambient Temperature
At nominal coil voltage
Operating
-40°C(-40°F) to 80°C(176°F)
Storage
-40°C(-40°F) to 130°C(266°F)
Power
At Pickup Voltage
Max Continuous
Dissipation
203 mW
.6 W at 20°C (68°F)
Temperature Rise
27°C (49°F)
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
(at nominal coil voltage)
Temperature
NOTES
Max. 130°C (266°F)
4. Specifications subject to change without notice.
2/20/08W
AZ932
RELAY ORDERING DATA
STANDARD RELAYS
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
3
Max. Continuous
VDC
3.9
Coil Resistance
Must Operate
VDC
2.3
5
6.5
70 ±10%
3.8
AZ932–1AH–5D
AZ932–1CH–5D
6
7.8
100 ±10%
4.5
AZ932–1AH–6D
AZ932–1CH–6D
25 ±10%
1 Form A
(SPST-N.O.)
AZ932-1AH-3D
1 Form C
(SPDT)
AZ932-1CH-3D
9
11.7
225 ±10%
6.8
AZ932–1AH–9D
AZ932–1CH–9D
12
15.6
400 ±10%
9.0
AZ932–1AH–12D
AZ932–1CH–12D
18
23.4
900 ±10%
13.5
AZ932-1AH-18D
AZ932-1CH-18D
24
31.2
1,600 ±15%
18.0
AZ932–1AH–24D
AZ932–1CH–24D
48
62.4
4,500 ±15%
36.0
AZ932–1AH–48D
AZ932–1CH–48D
*Add suffix “E” for epoxy sealed version. Add suffix “G” for gold plated contacts. Add suffix “F” for Class F insulation system. Substitute “1BH” in place of “1AH” to
indicate 1 Form B.
MECHANICAL DATA
PC Board Layout
Outline Dimensions
.827
[ 21]
2xø.051
[ø1.3]
.089
[2.25]
.799
[20.3]
.472
[12.00]
.236
[6.00]
.157
[4]
2xø.039
[ø1.0]
.079
[2.00]
.089
[2.25]
.480
[12.20]
.236
[6.00]
2x.039
[1.00]
.012
[0.30]
.157
[4.00]
.079
[2.00]
.630
[16 ]
.480
[12.20]
FORM "A"/ FORM “B”
.236
[6.00]
2x.020
[0.50]
.157
[4.00]
.079
[2.00]
.089
[2.25]
.039
[1.00]
.236
[6.00]
2x.018
[0.45]
2x.020
[0.50]
.472
[12.00]
2xø.039
[ø1.0]
.480
[12.20]
3xø.051
[ø1.3]
Wiring Diagram
FORM "C"
2
2
3
3
1
1
FORM "A"
3
1
5
5
2
4
5
FORM "B"
FORM "C"
2/20/08W
Similar pages