Hittite HMC364S8G Smt gaas hbt mmic divide-by-2, dc - 12.5 ghz Datasheet

HMC364S8G / 364S8GE
v03.0705
FREQUENCY DIVIDERS & DETECTORS - SMT
5
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Typical Applications
Features
Prescaler for DC to X Band PLL Applications:
Ultra Low SSB Phase Noise: -145 dBc/Hz
• Satellite Communication Systems
Wide Bandwidth
• Fiber Optic
Output Power: 4 dBm
• Point-to-Point and Point-to-Multi-Point Radios
Single DC Supply: +5V
• VSAT
S8G SMT Package
Functional Diagram
General Description
The HMC364S8G & HMC364S8GE are low noise
Divide-by-2 Static Dividers with InGaP GaAs HBT
technology in 8 lead surface mount plastic packages.
This device operates from DC (with a square wave
input) to 12.5 GHz input frequency with a single +5.0V
DC supply. The low additive SSB phase noise of -145
dBc/Hz at 100 kHz offset helps the user maintain good
system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Conditions
Min.
Typ.
12.5
13.5
0.2
0.5
GHz
Fin = 1 to 10 GHz
-15
>-20
+10
dBm
Fin = 10 to 12 GHz
-10
>-15
+5
dBm
Fin = 12 to 12.5 GHz
-4
>-8
+2
dBm
5
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Output Power
Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time
Sine Wave Input. [1]
Max.
GHz
Fin = 6 GHz
2
Fin = 9 GHz
-2
dBm
Fin = 11 GHz
-5
dBm
dBm
Fin = 12.5 GHz
-8
dBm
Both RF Outputs Terminated
40
dB
Pin = 0 dBm, Fin = 6 GHz
-145
dBc/Hz
Pin = 0 dBm, Fout = 882 MHz
100
ps
105
mA
Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal.
5 - 32
Units
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC364S8G / 364S8GE
v03.0705
20
10
10
Recommended
Operating Window
-10
-20
0
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
-10
-20
-30
-30
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
0
1
2
3
4
INPUT FREQUENCY (GHz)
8
9 10 11 12 13 14 15
-20
SSB PHASE NOISE (dBc/Hz)
OUTPUT POWER (dBm)
7
0
+25 C
+85 C
-40 C
0
1
2
3
4
5
6
7
8
-40
-60
-80
-100
-120
-140
-160
2
10
9 10 11 12 13 14 15
3
4
10
5
10
INPUT FREQUENCY (GHz)
10
6
10
7
10
OFFSET FREQUENCY (Hz)
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
0
-20
-30
-40
-50
Both Output Ports Terminated
One Output Port Terminated
-10
POWER LEVEL (dBm)
Pfeedthru
3rd Harmonic
-10
OUTPUT LEVEL (dBm)
6
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
Output Power vs. Temperature
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
5
INPUT FREQUENCY (GHz)
FREQUENCY DIVIDERS & DETECTORS - SMT
20
0
5
Input Sensitivity Window vs. Temperature
INPUT POWER (dBm)
INPUT POWER (dBm)
Input Sensitivity Window, T= 25 °C
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
-20
-30
-40
-50
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 33
HMC364S8G / 364S8GE
v03.0705
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
AMPLITUDE (mV)
FREQUENCY DIVIDERS & DETECTORS - SMT
5
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Absolute Maximum Ratings
700
600
500
400
300
200
100
0
-100
-200
-300
-400
-500
-600
-700
22.7 22.9 23.1 23.3 23.5 23.7 23.9 24.1 24.3 24.5 24.7
RF Input (Vcc = +5V)
-13 dBm
Vcc
+5.5V
VLogic
Vcc -1.6V to Vcc -1.2V
Storage Temperature
-65 to -150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Typical Supply Current vs. Vcc
Vcc (V)
TIME (nS)
Icc (mA)
4.75
93
5.0
105
5.25
115
Note: Divider will operate over full voltage range shown above
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC364S8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC364S8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
HMC364
XXXX
[2]
HMC364
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
5 - 34
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC364S8G / 364S8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
Pin Number
Function
Description
1
OUT
Divided output 180° out of phase with pin 3.
2, 6
N/C
No connection. These pins must not be grounded.
3
OUT
Divided Output.
4
VCC
Supply voltage 5V ± 0.25V.
5
IN
RF Input must be DC blocked.
7
IN
RF Input 180° out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8
GND
Ground Backside of package has exposed metal ground slug which
must be connected to ground.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
FREQUENCY DIVIDERS & DETECTORS - SMT
5
Pin Description
5 - 35
HMC364S8G / 364S8GE
v03.0705
FREQUENCY DIVIDERS & DETECTORS - SMT
5
Evaluation PCB
List of Materials for Evaluation PCB 104631
Item
Description
J1 - J3
PCB Mount SMA RF Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5
1000 pF Capacitor, 0603 Pkg.
C6
10 μF Tantalum Capacitor
U1
HMC364S8G / HMC364S8GE Divide-by-2
PCB [2]
104627 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
5 - 36
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
[1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and backside ground slug
should be connected directly to the ground plane
similar to that shown. A sufficient number of via
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC364S8G / 364S8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-2, DC - 12.5 GHz
5
FREQUENCY DIVIDERS & DETECTORS - SMT
Application Circuit
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 37
Similar pages