FCI GPZ15G 1.5 amp glass passivated sintered rectifier Datasheet

Preliminary Data Sheet
1.5 Amp Glass Passivated
Sintered Rectifiers
Mechanical Dimensions
GPZ15A . . . 15M Series
Description
JEDEC
D0-15
.230
.300
1.00 Min.
.104
.140
Features
.031 typ.
n LOWEST COST FOR GLASS SINTERED
CONSTRUCTION
n 1.5 AMP OPERATION @ TA = 55°C, WITH
NO THERMAL RUNAWAY
n LOWEST VF FOR GLASS SINTERED
CONSTRUCTION
n SINTERED GLASS CAVITY-FREE
JUNCTION
n TYPICAL IR < 100 nAmps
Electrical Characteristics @ 25 o C.
Maximum Ratings
Units
GPZ15A . . . 15M Series
15A
15B
15D
15G
15J
15K
15M
100
200
400
600
800
1000
Volts
Peak Repetitive Reverse Voltage...VRRM
50
RMS Reverse Voltage...VR(rms)
35
70
140
280
420
560
700
Volts
DC Blocking Voltage...VDC
50
100
200
400
600
800
1000
Volts
Average Forward Rectified Current...I F(av)
Current 3/8" Lead Length @ TA = 55°C
............................................. 1.5 ...............................................
Amps
Non-Repetitive Peak Forward Surge Current...IFSM
8.3mS, ½ Sine Wave Superimposed on Rated Load
............................................. 5 0 ...............................................
Amps
Forward Voltage @ 1.5A...VF
............................................. 1.0 ...............................................
Volts
Full Load Reverse Current...IR(av)
Full Cycle Average @ TA = 55°C
............................................. 1 0 0 ...............................................
µAmps
............................................. 5.0 ...............................................
............................................. 2 0 0 ...............................................
µAmps
µAmps
Typical Junction Capacitance...CJ (Note 1)
............................................. 1 5 ...............................................
pF
Typical Thermal Resistance...RθJA (Note 2)
............................................. 2 5 ...............................................
°C / W
Typical Reverse Recovery Time...tRR (Note 3)
............................................. 2.0 ...............................................
µS
Operating & Storage Temperature Range...TJ, TSTRG
......................................... -65 to 175 ..........................................
°C
DC Reverse Current...IR
@ Rated DC Blocking Voltage
TA = 25°C
TA = 150°C
Preliminary Data Sheet 1.5 Amp Glass Passivated
Forward Current Derating Curve
Amps
60 Hz RESISTIVE
OR INDUCTIVE LOAD
0.375″″ (9.5mm) LEAD LENGTH
TA = Ambient Temperature (°°C)
Typical Junction Capacitance
Non-Repetitive
Peak Forward Surge Current
TJ = 25°°C
f = 1.0 MHZ
VSIG = 50mVp-p
Amps
pF
TJ = TJ max.
8.3 mS Single Half Sine Wave
(Jedec Method)
Number of Cycles @ 60 HZ
Reverse Voltage (Volts)
Typical Instantaneous Forward Characteristics
Typical Reverse Characteristics
TJ = 125°°C
25°°C
TTJJ== 25°C
µS
Pulse Width
Width==300µS
300µ
Pulse
1%Duty
DutyCycle
Cycle
1%
TJ = 25°C
Volts
µ Amps
TJ =150°C
Amps
GPZ15A . . . 15M Series
Sintered Rectifiers
TJ = 75°°C
TTJ == 25°
25°°°CC
J
Percent of Rated Peak Voltage
NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V.
2. Thermal Resistance from Junction to Ambient at 3/8" Lead Length, P.C. Board Mounted.
3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A.
Ratings at
25 Deg. C ambient
temperature
unless otherwise
specified.
Single Phase Half
Wave, 60 HZ
Resistive or
Inductive Load.
For Capacitive
Load, Derate
Current by 20%.
Similar pages