Datatronic DR340-1-123 Shielded power inductor Datasheet

February 28, 2007
SHIELDED POWER INDUCTOR DR340-1 SERIES
Features
z
z
z
z
Maximum Height: 8.0mm
Footprint: 12mm x 12mm Max.
Inductance Range from 1.2 µH to 47µH
Non-RoHS Versions are Available (Note 5)
ELECTRICAL SPECIFICATIONS AT 25°C
OPERATING TEMPERATURE -20°C to +80°C
Part Number
Inductance (µH)
Test Frequency
DCR (Ω) Max.
IDC (A) Max.
DR340-1-122
DR340-1-242
DR340-1-352
DR340-1-472
DR340-1-612
DR340-1-762
DR340-1-103
DR340-1-123
DR340-1-153
DR340-1-183
DR340-1-223
DR340-1-273
DR340-1-333
DR340-1-393
DR340-1-473
1.2 +40%/-20%
2.4 +40%/-20%
3.5 +40%/-20%
4.7 +40%/-20%
6.1 +40%/-20%
7.6 +40%/-20%
10 ± 20%
12 ± 20%
15 ± 20%
18 ± 20%
22 ± 20%
27 ± 20%
33 ± 20%
39 ± 20%
47 ± 20%
100kHz
100kHz
100kHz
100kHz
100kHz
100kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
1kHz
0.007
0.012
0.014
0.016
0.018
0.020
0.022
0.025
0.027
0.040
0.044
0.046
0.065
0.073
0.100
9.80
8.00
7.50
6.80
6.60
5.90
5.40
4.90
4.50
3.90
3.60
3.40
3.00
2.75
2.50
MECHANICAL OUTLINES
1
.472
12,00
.197
5,00
.275
7,00
.311
7,90
XXX
.504
12,80
2
.472
12,00
.212
5,40
.315 Max.
8,00
1
NOTES:
1. Dimensions are shown in inches/millimeters
2. Unless otherwise specified, tolerance = Inches: ±0.012
= Millimeters: ±0,30
3. IDC MAX based on the inductance being 75% of its initial value
4. Tape & reel quantity, 500 pcs/reel
5. For non-RoHS parts replace the DR prefix with 42- (e.g. DR340-1 becomes 42-340-1)
6. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020
DATATRONIC:
2
SCHEMATIC
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.
Similar pages