Freescale MC68HC908JL3 Addendum to mc68hc908jl3 technical datum Datasheet

Addendum
HC908JL3AD/D
Rev. 4, 10/2003
Freescale Semiconductor, Inc...
Addendum to
MC68HC908JL3
Technical Data
This addendum provides changes and additional information to:
MC68HC908JL3 Technical Data
(Freesca;e document number MC68HC908JL3/H Rev. 1.0)
NOTE:
To provide the most up-to-date information, the revision of our documents on
the World Wide Web will be the most current. Your printed copy may be an
earlier revision. To verify you have the latest information available, refer to:
http://freescale.com
Page 43
4.7 FLASH Program Operation — remove the note:
“In order to avoid program disturbs, the row must be erased before any byte on
that row is programmed.”
48-Pin LQFP MC68H(R)C908JL3
The 48-pin LQFP package is available for the MC68HC908JL3 and
MC68HRC908JL3. The pin assignment and mechanical drawing are shown in
Figure 1 and Figure 2 respectively.
Order Numbers:
MC order number
MC68HC908JL3CFA
MC68HRC908JL3CFA
Oscillator type
Crystal
RC
Notes:
C = –40 °C to +85 °C
FA = Plastic Low Quad Flat Pack (LQFP)
© Freescale Semiconductor, Inc., 2004. All rights reserved.
FLASH memory
Operating Voltage
Package
4096 Bytes
5V ±10%
3V ±10%
48-pin LQFP
Freescale Semiconductor, Inc.
HC908JL3AD/D
NC
VSS
PTA0
IRQ1
RST
PTA5
PTD4
PTD5
NC
46
45
44
43
42
41
40
39
38
37 NC
NC
36 NC
NC
2
35
NC
OSC1
3
34
NC
OSC2/PTA6
4
33
PTD2
PTA1
5
32
PTA4
NC
6
31
PTD3
30
NC
MC68HC908JL3
MC68HRC908JL3
25 NC
NC 24
23
NC 13
NC 12
NC
NC
22
26
PTB2
11
21
NC
PTB3
PTD1
20
27
PTD0
10
19
PTB7
PTB4
PTB1
18
28
PTD6
9
17
PTA3
PTD7
PTB0
16
29
PTB5
8
15
PTA2
PTB6
7
14
VDD
NC
Freescale Semiconductor, Inc...
NC 1
47
48 NC
48-Pin LQFP
Pin Assignment
NC: No connection
Figure 1. 48-Pin LQFP Pin Assignment
2
Addendum to MC68HC908JL3 Technical Data
For More Information On This Product,
Go to: www.freescale.com
Freescale Semiconductor, Inc.
HC908JL3AD/D
48-Pin LQFP MC68H(R)C908JL3
48-Pin LQFP
Mechanical
Specification
4X
0.200 AB T–U Z
DETAIL Y
A
P
A1
48
37
36
U
B
V
AE
B1
12
25
13
AE
V1
24
DIM
A
A1
B
B1
C
D
E
F
G
H
J
K
L
M
N
P
R
S
S1
V
V1
W
AA
Z
S1
T, U, Z
S
DETAIL Y
4X
0.200 AC T–U Z
0.080 AC
G
AB
AD
AC
MILLIMETERS
MIN
MAX
7.000 BSC
3.500 BSC
7.000 BSC
3.500 BSC
1.400
1.600
0.170
0.270
1.350
1.450
0.170
0.230
0.500 BSC
0.050
0.150
0.090
0.200
0.500
0.700
1°
5°
12° REF
0.090
0.160
0.250 BSC
0.150
0.250
9.000 BSC
4.500 BSC
9.000 BSC
4.500 BSC
0.200 REF
1.000 REF
M°
BASE METAL
TOP & BOTTOM
N
R
J
0.250
Freescale Semiconductor, Inc...
1
T
C
E
F
D
0.080
M
AC T–U Z
SECTION AE–AE
W
H
L°
K
DETAIL AD
AA
Figure 2. 48-Pin Plastic Low Quad Flat Pack (LQFP) (Case #932)
Addendum to MC68HC908JL3 Technical Data
For More Information On This Product,
Go to: www.freescale.com
GAUGE PLANE
9
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DATUM PLANE AB IS LOCATED AT BOTTOM OF
LEAD AND IS COINCIDENT WITH THE LEAD
WHERE THE LEAD EXITS THE PLASTIC BODY AT
THE BOTTOM OF THE PARTING LINE.
4. DATUMS T, U, AND Z TO BE DETERMINED AT
DATUM PLANE AB.
5. DIMENSIONS S AND V TO BE DETERMINED AT
SEATING PLANE AC.
6. DIMENSIONS A AND B DO NOT INCLUDE MOLD
PROTRUSION. ALLOWABLE PROTRUSION IS
0.250 PER SIDE. DIMENSIONS A AND B DO
INCLUDE MOLD MISMATCH AND ARE
DETERMINED AT DATUM PLANE AB.
7. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. DAMBAR PROTRUSION SHALL
NOT CAUSE THE D DIMENSION TO EXCEED
0.350.
8. MINIMUM SOLDER PLATE THICKNESS SHALL BE
0.0076.
9. EXACT SHAPE OF EACH CORNER IS OPTIONAL.
Freescale Semiconductor, Inc...
Freescale Semiconductor, Inc.
Home Page:
www.freescale.com
email:
[email protected]
USA/Europe or Locations Not Listed:
Freescale Semiconductor
Technical Information Center, CH370
1300 N. Alma School Road
Chandler, Arizona 85224
(800) 521-6274
480-768-2130
[email protected]
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
[email protected]
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064, Japan
0120 191014
+81 2666 8080
[email protected]
Asia/Pacific:
Freescale Semiconductor Hong Kong Ltd.
Technical Information Center
2 Dai King Street
Tai Po Industrial Estate,
Tai Po, N.T., Hong Kong
+800 2666 8080
[email protected]
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
(800) 441-2447
303-675-2140
Fax: 303-675-2150
LDCForFreescaleSemiconductor
@hibbertgroup.com
RoHS-compliant and/or Pb- free versions of Freescale products have the functionality
and electrical characteristics of their non-RoHS-compliant and/or non-Pb- free
counterparts. For further information, see http://www.freescale.com or contact your
Freescale sales representative.
For information on Freescale.s Environmental Products program, go to
http://www.freescale.com/epp.
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
HC908JL3AD/D
Rev. 4
10/2003
For More Information On This Product,
Go to: www.freescale.com
Similar pages