Freescale MPC7410 Risc microprocessor hardware specifications addendum Datasheet

Freescale Semiconductor
Technical Data
Document Number: MPC7410ECS07AD
Rev. 2, 11/2010
MPC7410 RISC Microprocessor
Hardware Specifications Addendum
for the MPC7410TxxnnnNE Series
This document describes part-number-specific changes to
the MPC7410 RISC Microprocessor Hardware
Specifications (Document No. MPC7410EC).
Specifications provided in this document supersede those in
the MPC7410 RISC Microprocessor Hardware
Specifications, Rev. 6.1 or later, for the part numbers listed
in Table A. only. Specifications not addressed herein are
unchanged.
Because this document is frequently updated, see the website
listed on the back page of this document or contact your
Freescale sales office for the latest version.
© 2010 Freescale Semiconductor, Inc. All rights reserved.
Freescale Part Numbers Affected:
MPC7410TRX400NE
MPC7410TRX450NE
MPC7410THX450NE
Table A. Part-Number-Specific Changes
Operating Conditions
Freescale Part
Number
MPC7410TRX400NE
MPC7410TRX450NE
MPC7410THX450NE
Significant Differences from Hardware
Specification
CPU
Frequency
Vdd
TJ (°C)
OVdd
400 MHz
1.5V±50mV
-40 to 105
1.8/2.5 V
450 MHz
1.8V±100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The
MPC7410TRX400NE also fully conforms to the
MPC7410TRX450LE specification. See the
general MPC7410 Hardware Specifications.
450 MHz
1.5V±50mV
500 MHz
1.8V±100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The
MPC7410TRX450NE also fully conforms to the
MPC7410TRX500LE specification. See the
general MPC7410 Hardware Specifications.
450 MHz
1.5V±50mV
500 MHz
1.8V±100mV -40 to 105 1.8/2.5/3.3 V Extended temperature range. The
MPC7410THX450NE also fully conforms to the
MPC7410THX500LE specification. See the
general MPC7410 Hardware Specifications.
-40 to 105
-40 to 105
1.8/2.5 V
1.8/2.5 V
Extended temperature range. Reduced core
voltage to achieve lower power consumption.
Removes 3.3 V OVdd support. For all AC/DC
specifications not mentioned in this document,
see the MPC7410RX400LE specifications in the
general MPC7410 Hardware Specifications.
Extended temperature range. Reduced core
voltage to achieve lower power consumption.
Removes 3.3V OVdd support. For all AC/DC
specifications not mentioned in this document,
please refer to the MPC7410RX450LE
specifications in the general MPC7410
Hardware Specifications.
Extended temperature range. Reduced core
voltage to achieve lower power consumption.
Removes 3.3V OVdd support. For all AC/DC
specifications not mentioned in this document,
see to the MPC7410HX450LE specifications in
the general MPC7410 Hardware Specifications.
Features
The MPC7410TxxnnnNE feature set is identical to that of the MPC7410, with the following exceptions:
• Bus interface
— Selectable interface voltages of 1.8 V, 2.5 V (3.3 V is not supported)
DC Electrical Characteristics
The MPC7410TxxnnnNE DC electrical characteristics are identical to that of the MPC7410, with the
exceptions shown in Table B, Table C, and Table D.
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2
2
Freescale Semiconductor
Voltage to the L2 I/Os and processor interface I/Os are provided through separate sets of supply pins and
may be provided at the voltages shown in Table B.
Table B. Input Threshold Voltage Setting
BVSEL Signal 3
Processor Bus Input
Threshold is Relative to:
L2VSEL Signal 3
L2 Bus Input Threshold is
Relative to:
Note
0
1.8 V
0
1.8 V
1
HRESET
2.5 V
HRESET
2.5 V
1, 2
1
Not Supported
1
2.5 V
1, 4, 5
HRESET
Not Supported
HRESET
Not Supported
—
Notes:
1. Caution: The input threshold selection must agree with the OVdd/L2OVdd voltages supplied.
2. To select the 2.5-V threshold option, BVSEL and/or L2VSEL should be tied to HRESET so that the two signals change state
together. This is the preferred method for selecting this mode of operation.
3. To overcome the internal pull-up resistance, a pull-down resistance less than 250 ohms should be used.
4. Default voltage setting if left unconnected (internal pulled-up).
5. Caution: The MPC7410TRXnnnNE does not support the default OVdd setting of 3.3 V. The BVSEL input must be tie either
low or to HRESET.
Table C. Recommended Operating Conditions
Characteristic
Symbol
Recommended Value
Unit
Core supply voltage
Vdd
1.5V ± 50mV
V
PLL supply voltage
AVdd
1.5V ± 50mV
V
L2AVdd
1.5V ± 50mV
V
BVSEL = 0
OVdd
1.8V ± 100mV
V
BVSEL = HRESET
OVdd
2.5V ± 100mV
V
BVSEL = HRESET
or BVSEL = 1
OVdd
Not Supported
V
L2VSEL = 0
L2OVdd
1.8V ± 100mV
V
L2VSEL = HRESET
or L2VSEL = 1
L2OVdd
2.5V ± 100mV
V
Processor bus and
JTAG Signals
Vin
GND to OVdd
V
L2 Bus
Vin
GND to L2OVdd
V
Tj
-40 to 105
°C
L2 DLL supply voltage
Processor bus supply voltage
L2 bus supply voltage
Input voltage
Die-junction temperature
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2
Freescale Semiconductor
3
Table D. Power Consumption for MPC7410
Processor (CPU)
Frequency
Processor (CPU)
Frequency
400 MHz
450 MHz
Typical
2.92
Maximum
Unit
Notes
3.29
W
1, 3
6.6
7.43
W
1, 2,
Maximum
3.6
4.1
W
1, 2
Maximum
1.35
1.5
W
1, 2
1.3
1.45
W
1, 2
Typical
0.6
0.6
W
1, 3
Maximum
1.1
1.1
W
1, 2
Full-On Mode
Doze Mode
Nap Mode
Sleep Mode
Maximum
Sleep Mode—PLL and DLL Disabled
Notes:
1. These values apply for all valid processor bus and L2 bus ratios. The values do not include I/O Supply Power
(OVdd and L2OVdd) or PLL/DLL supply power (AVdd and L2AVdd). OVdd and L2OVdd power is system
dependent, but is typically <10% of Vdd power. Worst case power consumption for AVdd = 15 mw and L2AVdd
= 15 mW.
2. Maximum power is measured at 105 •C
C and Vdd = 1.5V while running an entirely cache-resident, contrived
sequence of instructions which keep the execution units, including AltiVec, maximally busy.
3. Typical power is an average value measured at 65 •C
C and Vdd = 1.5V in a system while running typical
benchmarks.
Part Numbers Addressed by this Specification
Table E provides the ordering information for the MPC7410TxxnnnNE series.
Table E. Part Marking Nomenclature
MPC
7410
x
xx
nnn
x
x
Product
Code
Part
Identifier
Process
Descriptor
Package
Processor
Frequency 1
Application
Modifier
Revision Level
MPC
7410
T: –40° to 105°C
RX = CBGA
400
450
HX = HCTE_CBGA
450
N: 1.5 V ±50 mV
E: 1.4; PVR = 800C 1104
Note:
1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other specifications
may support other maximum core frequencies.
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2
4
Freescale Semiconductor
Part Marking
Parts are marked as the example shown in Figure A.
MPC7410
TRXnnnNE
MMMMMM
ATWLYYWWA
7410
Notes:
BGA
nnn is the speed grade of the part
MMMMMM is the 6-digit mask number
ATWLYYWWA is the traceability code
CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)
Figure A. Freescale Part Marking for BGA Device
Document Revision History
Table F provides a revision history for this document.
Table F. Document Revision History
Rev.
Number
Date
2
11/2010
• Removed “RX” from document title.
• Added MPC7410THX450NE to list of devices covered by this document.
• In Table B, “Input Threshold Voltage Setting,” changed “XPC7410TRXnnnNE” to
“MPC7410TRXnnnNE” in note 5.
• Updated Table E, “Part Marking Nomenclature,” to include MPC7410THX450NE.
1.2
4/2005
• Document template update
• Document ID change from MPC7410TRXNEPNS/D for Part Number Specification to
MPC7410ECS07AD for Hardware Specification Addendum.
1.1
5/2003
Rather than readers of this spec referring to the MPC7410RXnnnNE part number spec and then to
the MPC7410RXnnnLE general hardware spec, this spec now includes the spec differences outlined
in the MPC7410RXnnnNE part number spec. Any specifications not called out in this spec for the part
numbers listed in Table A default back to the general hardware spec.
1
—
Minor formatting
0
—
Initial Release
Substantive Changes
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2
Freescale Semiconductor
5
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
1-800-521-6274 or
+1-480-768-2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064
Japan
0120 191014 or
+81 3 5437 9125
[email protected]
under its patent rights nor the rights of others. Freescale Semiconductor products are
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
[email protected]
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
1-800 441-2447 or
+1-303-675-2140
Fax: +1-303-675-2150
LDCForFreescaleSemiconductor
@hibbertgroup.com
Document Number: MPC7410ECS07AD
Rev. 2
11/2010
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
Freescale, the Freescale logo, and PowerQUICC are trademarks of
Freescale Semiconductor, Inc. Reg. U.S. Pat. & Tm. Off. CoreNet, QorIQ,
QUICC Engine, and VortiQa are trademarks of Freescale Semiconductor,
Inc. All other product or service names are the property of their respective
owners. The Power Architecture and Power.org word marks and the Power
and Power.org logos and related marks are trademarks and service marks
licensed by Power.org.
© 2010 Freescale Semiconductor, Inc.
Similar pages