Murata LQW18AN2N2D10 Chip inductor (chip coil) for high frequency horizontal wire wound Datasheet

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound
Data Sheet
1
Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound
LQW18A_10 Series (High Q/Low DC Resistance Type) (0603 Size)
c Packaging
1.6±0.2
0.80±0.15
*1 0.8±0.2
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
4000
J
330mm Paper Tape
10000
B
Bulk(Bag)
500
0.2±0.1
0.8±0.2
c Dimensions
*1 LQW18AN_10: 0.8±0.3
0.3±0.1
0.3±0.1
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQW18AN2N2D10p 2.2nH ±0.5nH
100MHz
1400mA
0.018ohm
25
250MHz
18000MHz
LQW18AN3N9C10p 3.9nH ±0.2nH
100MHz
1000mA
0.032ohm
38
250MHz
11000MHz
LQW18AN3N9D10p 3.9nH ±0.5nH
100MHz
1000mA
0.032ohm
38
250MHz
11000MHz
LQW18AN5N6D10p 5.6nH ±0.5nH
100MHz
900mA
0.045ohm
38
250MHz
10000MHz
LQW18AN6N8C10p 6.8nH ±0.2nH
100MHz
900mA
0.045ohm
38
250MHz
7000MHz
LQW18AN6N8D10p 6.8nH ±0.5nH
100MHz
900mA
0.045ohm
38
250MHz
7000MHz
LQW18AN8N2D10p 8.2nH ±0.5nH
100MHz
800mA
0.058ohm
38
250MHz
7000MHz
LQW18AN10NG10p
10nH ±2%
100MHz
800mA
0.058ohm
38
250MHz
5000MHz
LQW18AN10NJ10p
10nH ±5%
100MHz
800mA
0.058ohm
38
250MHz
5000MHz
LQW18AN12NG10p
12nH ±2%
100MHz
750mA
0.071ohm
38
250MHz
5000MHz
LQW18AN12NJ10p
12nH ±5%
100MHz
750mA
0.071ohm
38
250MHz
5000MHz
LQW18AN15NJ10p
15nH ±5%
100MHz
700mA
0.085ohm
42
250MHz
4500MHz
LQW18AN18NG10p
18nH ±2%
100MHz
700mA
0.085ohm
42
250MHz
3500MHz
LQW18AN18NJ10p
18nH ±5%
100MHz
700mA
0.085ohm
42
250MHz
3500MHz
LQW18AN22NG10p
22nH ±2%
100MHz
640mA
0.099ohm
42
250MHz
3200MHz
LQW18AN22NJ10p
22nH ±5%
100MHz
640mA
0.099ohm
42
250MHz
3200MHz
LQW18AN27NG10p
27nH ±2%
100MHz
590mA
0.116ohm
42
250MHz
2800MHz
LQW18AN27NJ10p
27nH ±5%
100MHz
590mA
0.116ohm
42
250MHz
2800MHz
LQW18AN33NJ10p
33nH ±5%
100MHz
550mA
0.132ohm
42
250MHz
2500MHz
Operating Temperature Range (Self-temperature rise is not included): -55 to +125°C
Only for reflow soldering.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.11.2
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound
Data Sheet
2
Continued from the preceding page.
c Q-Frequency Characteristics (Typ.)
c Inductance-Frequency Characteristics (Typ.)
100
200
2.2nH
33nH
150
Inductance (nH)
Q
10nH
100
33nH
10nH
10
50
2.2nH
0
10
100
1000
1
10
10000
Frequency (MHz)
100
1000
10000
Frequency (MHz)
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.11.2
http://www.murata.com/
Similar pages