Kingbright L-1503CB/1SRD T-1 3/4 (5mm) right angle led indicator Datasheet

T-1 3/4 (5mm) RIGHT ANGLE LED INDICATORS
®
Kingbright
L-1503CB/1I HIGH EFFICIENCY RED
L-1503CB/1G GREEN
L-1503CB/1Y YELLOW
L-1503CB/1SR SUPER BRIHGT RED
Package Dimensions
Features
lPRE-TRIMMED
LEADS FOR PC BOARD MOUNTING.
lI.C. COMPATIBLE.
lBLACK CASE ENHANCES CONTRAST RATIO.
lWIDE VIEWING ANGLE.
lHIGH RELIABILITY - LIFE MEASURED IN YEARS.
Description
The Green source color devices are made with Gallium Phosphide
Green Light Emitting Diode.
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange Light
Emitting Diode.
The Yellow source color devices are made with Gallium Arsenide
Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
The Super Bright Red source color devices are made with Gallium
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subjected to change without notice.
Aluminum Arsenide Red Light Emitting Diode.
Selection Guide
Part No.
Dice
Lens Type
Iv (mcd)
@ 10 mA
Viewing
Angle
Min.
Max.
2θ1/2
12.5
80
60°
L-1503CB/1ID
HIGH EFFICIENCY RED (GaAsP/GaP)
RED DIFFUSED
L-1503CB/1GD
GREEN (GaP)
GREEN DIFFUSED
5
32
60°
L-1503CB/1YD
YELLOW (GaAsP/GaP)
YELLOW DIFFUSED
5
32
60°
L-1503CB/1SRD
SUPER BRIGHT RED (GaAlAs)
RED DIFFUSED
*100
*500
60°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. *Luminous intensity with asterisk is measured at 20 mA.
3-L1503CB-1
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Units
Test Conditions
λpeak
Peak Wavelength
High Efficiency Red
Green
Yellow
Super Bright Red
625
565
590
660
nm
IF=20mA
Spectral Line
Halfwidth
High Efficiency Red
Green
Yellow
Super Bright Red
45
30
35
20
nm
IF=20mA
C
Capacitance
High Efficiency Red
Green
Yellow
Super Bright Red
12
45
10
95
pF
VF=0V;f=1MHz
vF
Forward Voltage
High Efficiency Red
Green
Yellow
Super Bright Red
2.0
2.2
2.1
1.85
V
IF=20mA
IR
Reverse Current
All
uA
VR = 5V
∆λ1/2
Device
Typ.
Max.
2.5
2.5
2.5
2.5
10
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation
High Efficiency
Red
Green
Yellow
105
105
105
Super Bright Red Units
100
mW
DC Forward Current
30
25
30
30
mA
Peak Forward Current [1]
150
150
150
150
mA
5
5
5
5
V
Reverse Voltage
Operating/Storage Temperature
-40 °C To +85 °C
260 °C For 5 Seconds
Lead Soldering Temperature [2]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 4mm below package base.
3-L1503CB-2
High Efficiency Red L-1503CB/1ID
Green L-1503CB/1GD
3-L1503CB-3
Yellow L-1503CB/1YD
Super Bright Red L-1503CB/1SRD
3-L1503CB-4
Similar pages