Allied MLB03-400-RC Multilayer ferrite bead Datasheet

RoHS
MLB03
Multilayer Ferrite Beads
Dimensions:
0.039±0.004
Inches
(mm)
(1.0±0.10)
0.020±0.004
(0.50±0.10)
0.020±0.004
(0.50±0.10)
0.010±0.004
0.016
(0.40)
(0.25±0.10)
0.016
(0.40)
Allied
Part
Number
Impedance (Ω)
@ 100 MHz
+/- 25%
MLB03-060-RC
MLB03-100-RC
MLB03-300-RC
MLB03-330-RC
MLB03-400-RC
MLB03-470-RC
MLB03-600-RC
MLB03-700-RC
MLB03-750-RC
MLB03-800-RC
MLB03-900-RC
MLB03-101-RC
MLB03-121-RC
MLB03-151-RC
MLB03-221-RC
MLB03-241-RC
6
10
30
33
40
47
60
70
75
80
90
100
120
150
220
240
0.05
0.05
0.30
0.30
0.30
0.40
0.40
0.40
0.40
0.40
0.50
0.50
0.50
0.50
0.50
0.50
500
500
300
300
300
300
300
300
300
300
300
300
300
300
300
300
MLB03-301-RC
MLB03-331-RC
MLB03-481-RC
300
330
480
0.80
0.80
0.80
300
300
300
DC
Resistance
(Ω) Max.
1.00
600
MLB03-601-RC
1.50
1000
MLB03-102-RC
2.00
1500
MLB03-152-RC
*Temperature rise ∆T=30ºC at rated current.
All specifications subject to change without notice.
*Rated
Current
(mA)
300
100
60
0.018
(0.46)
Features
•
•
•
•
Surface mount EMI suppression components
Nickel barrier termination for excellent resistance to solder heat
Multi layer technology
Flow and reflow soldering
Electrical
Impedance Range: 6Ω to 1500Ω
Tolerance: 25% over entire range
Operating Range: -55ºC ~ +125ºC
Storage Temp: Under 25ºC at 40~60% Humidity
Rated Current: Based on temp rise not to exceed 30ºC
Resistance to Solder Heat
Pre-Heat 150ºC, 1 minute
Solder Composition: Sn/Ag3.0/Cu0.5
Solder Temp: 260±5ºC for 10sec ±1 sec.
Minimum of 75% of Electrode covered with new solder.
Impedance within 30% of initial value.
Test Equipment
(Z): HP4291A RF Impedance/Material Analyzer
(RDC): Chen Hwa 502BC
Physical
Packaging: 10000 per 7 inch reel.
Marking: None
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
REVISED 6/18/09
www.alliedcomponents.com
Similar pages