MIC MB252 Single-phase bridge rectifier Datasheet

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
MB2505 THRU MB2510
KBPC25005 THRU KBPC2510
VOLTAGE RANGE
CURRENT
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 oC/10 second, at 5 lbs. (2.3kg) tension.
50 to 1000 Volts
25 Amperes
MB-35
1.14( 28.9)
1.12( 28.4)
0.666( 16.9)
0.626( 15.9)
+
AC
1.14( 28.9) 0.728( 18.5)
1.12( 28.4) 0.688( 17.5)
0.666( 16.9)
0.626( 15.9)
-
AC
0.570( 14.5)
0.530( 13.5)
0.205( 5.2)
DIA
0.197( 5.0)
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Plated 0.25” (6.35mm) lug.
l Polarity: Polarity symbols marked on case
l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max.
l Weight:1.02 ounce, 29 grams
0.46( 11.7)
0.41( 10.5)
EXOPY CASE
0
(
.0 9
2.3
0.472( 12.0)
0.374( 9.5)
IA
) D
0.033( 0.84)
0.028( 0.71)
0.252( 6.4)
0.248( 6.3)
0.252( 6.4)
0.248( 6.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
MB2505
MB251
MB252
MB254
MB256
SYMBOLS KBPC25005 KBPC2501 KBPC2502 KBPC2504 KBPC2506
MB258
KBPC2508
MB2510
KBPC2510
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward
Rectified Output Current, at TC=55℃(Note1,2)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
Method)
Rating for Fusing(t<8.3ms)
Maximum Instantaneous Forward Voltage at 12.5A
TA=25℃
Maximum DC Reverse Current at
rated DC blocking voltage
TA=100℃
I(AV)
25
Amps
IFSM
300
Amps
I2 T
VF
373
1.1
10
1.0
A2S
Volts
µAmps
mAmps
2500
VAC
IR
Isolation Voltage from case to lugs
VISO
Typical Thermal Resistance (Note 1,2)
RθJC
2.0
℃/W
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Operating Temperature Range
Storage Temperature Range
NOTES:
1.
Unit mounted on 5”×6”×4.9”(12.8×15.2×12.4mm) Al. finned plate.
2.
Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
E-mail: [email protected]
Web Site: www.cnmic.com
1/2
MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
MB2505 THRU MB2510
KBPC25005 THRU KBPC2510
E-mail: [email protected]
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
25 Amperes
Web Site: www.cnmic.com
2/2
Similar pages