AD ADA4004-2 1.8 nv/hz, 36 v precision single and dual amplifier Datasheet

PreliminaryTechnical Data
1.8 nV/√Hz, 36 V Precision Single and Dual
Amplifier
ADA4004-1 and ADA4004-2
FEATURES
Very low voltage noise: 1.8 nV/√Hz
Low input bias current: 100 nA maximum
Offset voltage: 100 μV maximum
High gain: 120 dB
Wide bandwidth: 12 MHz
±5 V to ±15 V operation
APPLICATIONS
Precision instrumentation
Filter blocks
Microphone preamplifier
Industrial control
Thermocouples and RTDs
Reference buffers
GENERAL DESCRIPTION
The ADA4004-1 and ADA4004-2 are single and dual precision
bipolar op amps that featuring a 1.8 nV/√Hz precision, 40 μV
offset, 0.7 μV/ºC drift, 12 MHz bandwidth, and low 1.7
mA/amplifier supply current.
PIN CONFIGURATIONS
OUT 1
V- 2
ADA4004-1
5
V+
3
-IN
TOP VIEW
(Not to Scale)
+IN 3
Figure 1. . 5-Lead SOT (RJ-5)
NC 1
8
NC
ADA4004-1
7
V+
TOP VIEW
V- 4 (Not to Scale)
6
OUT
5
NC
-IN 2
+IN 3
NC = NO CONNECT
Figure 2. 8-Lead SOIC (R-8)
OUT A
1
- IN A
2
+IN A
3
V-
4
ADA4004-2
TOP VIEW
(Not to Scale)
8
V+
7
OUT B
6
-IN B
5
+IN B
8-Lead MSOP (RM-8)
The ADA4004 is designed on the high performance iPolar™
process, enabling improvements such as reduced noise and
power consumption, increased speed and stability, and a
smaller footprint size. Novel design techniques enable the
ADA4004 to achieve 1.8 nV/√Hz voltage noise density and
a low 6 Hz 1/f noise corner frequency while consuming just
1.7 mA/amplifier. The small package saves board space, reduces
cost, and improves layout flexibility.
Applications for these amplifiers include high precision controls,
PLL filters, high performance precision filters, medical and
analytical instrumentation, precision power supply controls,
ATE, and data acquisition systems.
The high performance ADA4004 is offered in the very small 5lead SOT and 8-lead SOIC for the single (ADA4004-1) and the
8-lead MSOP for the dual (ADA4004-2), lead-free, surfacemount packages. Operation is fully specified from ±5 V to ±15
V from −40°C to +125°C.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.
ADA4004-1 and ADA4004-2
Preliminary Technical Data
SPECIFICATIONS
VS = ±5.0 V, VCM = 0 V, TA = +25°C, unless otherwise specified.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
Min
VOS
Typ
Max
Unit
40
140
300
85
165
85
100
+3.5
μV
μV
nA
nA
nA
nA
V
dB
−40°C ≤ TA ≤ +125°C
Input Bias Current
IB
Input Offset Current
IOS
40
−40°C ≤ TA ≤ +125°C
40
−40°C ≤ TA ≤ +125°C
Input Voltage Range
Common-Mode Rejection Ratio
CMRR
Open-Loop Gain
AVO
Offset Voltage Drift
ΔVOS/ΔT
OUTPUT CHARACTERISTICS
Output Voltage High
VOH
Output Voltage Low
VOL
Short Circuit Limit
ISC
Output Current
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
IO
PSRR
VCM = −3.0 V to +3.0 V
−3.5
105
−40°C ≤ TA ≤ +125°C
RL = 2 kΩ, VO = −2.5 V to +2.5 V
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +125°C
95
250
170
RL = 2 kΩ to ground
−40°C ≤ TA ≤ +125°C
RL = 2 kΩ to ground
−40°C ≤ TA ≤ +125°C
3.7
3.4
110
400
0.7
−40°C ≤ TA ≤ +125°C
VOUT = ±3.6 V
VS = ±5.0 V to ±15.0 V
−40°C ≤ TA ≤ +125°C
111
3.9
3.6
−3.6
−3.6
25
−3.55
−3.5
±10
110
110
118
ISY
1.7
2.0
−40°C ≤ TA ≤ +125°C
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth Product
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise Density
Current Noise Density
1
dB
V/mV
V/mV
μV/°C
V
V
V
V
mA
mA
mA
dB
dB
mA
mA
SR
GBP
RL = 2 kΩ to ground
2.7
12
V/μs
MHz
en p-p
en
in
in
0.1 Hz to 10 Hz
f = 1 kHz
f = 10 Hz
f = 200 Hz
0.1
1.8
3.5
1.2
μV p-p
nV/√Hz
pA/√Hz
pA/√Hz
Rev. PrA | Page 2 of 4
Preliminary Technical Data
ADA4004-1 and ADA4004-2
VS = ±15 V, VCM = 0 V, TA = +25°C, unless otherwise specified.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
Min
VOS
Typ
Max
Unit
40
125
270
90
165
60
100
+12.5
113
μV
μV
nA
nA
nA
nA
V
dB
104
1200
500
0.7
dB
V/mV
V/mV
μV
−40°C ≤ TA ≤ +125°C
Input Bias Current
IB
40
−40°C ≤ TA ≤ +125°C
Input Offset Current
IOS
−40°C ≤ TA ≤ +125°C
Input Voltage Range
Common-Mode Rejection Ratio
CMRR
Open-Loop Gain
AVO
Offset Voltage Drift
ΔVOS/ΔT
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short Circuit Limit
Output Current
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
VOH
VOL
ISC
IO
PSRR
VCM = −12.5 V to +12.5 V
−12.5
110
−40°C ≤ TA ≤ +125°C
RL = 2 kΩ, VO = −12.5 V to +12.5 V
−40°C ≤ TA ≤ +125°C
−40°C ≤ TA ≤ +125°C
100
500
250
RL = 2 kΩ to ground
−40°C ≤ TA ≤ +125°C
RL = 2 kΩ to ground
−40°C ≤ TA ≤ +125°C
13.4
13.1
VOUT = ±13.6 V
VS = ±5.0 V to ±15.0 V
−40°C ≤ TA ≤ +125°C
110
110
13.6
13.3
−13.3
−13.25
25
±10
−13.2
−13.18
118
ISY
1.775
2.10
−40°C ≤ TA ≤ +125°C
DYNAMIC PERFORMANCE
Slew Rate
Gain Bandwidth Product
NOISE PERFORMANCE
Voltage Noise
Voltage Noise Density
Current Noise Density
Current Noise Density
1
V
V
V
V
mA
mA
dB
dB
mA
mA
SR
GBP
RL = 2 kΩ to ground
2.7
12
V/μs
MHz
en p-p
en
in
in
0.1 Hz to 10 Hz
f = 1 kHz
f = 10 Hz
f = 200 Hz
0.15
1.8
3.5
1.2
μV p-p
nV/√Hz
pA/√Hz
pA/√Hz
Rev. PrA | Page 3 of 4
ADA4004-1 and ADA4004-2
Preliminary Technical Data
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering 60 sec)
Rating
±18 V/+36 V
±V supply
±V supply
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
© 2006 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
PR06548–0–12/06(PrA)
Rev. PrA | Page 4 of 4
Similar pages