MA-COM MAPD-007249-ESML21 2-way power divider Datasheet

RoHS
Compliant
E-Series 2-Way 0° Power Divider
5 – 500 MHz
Features
•
•
•
•
•
•
MAPD-007249-ESML21
V1P
SM-24 package
Surface mount
Wide frequency range
2-Way—0°
Lead Free
RoHS* Compliant and is 2600C reflow compatible.
Available on Tape and Reel.
Description
M/A-COM’s MAPD-007249-ESML21 is a RoHS compliant 2 Way 0° Power Divider in a low cost, surface
mount package. Ideally suited for high volume cellular
and wireless applications. Parts are packaged in tape
& reel.
Pin Configuration
Ordering Information
Pin No.
Function
1
Ground
2
Not Connected
3
Port 2
4
Port 1
5
Not Connected
6
Input
Part Number
Package
MAPD-007249-ESML21
500 piece reel
Note: Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 1,2
Parameter
Absolute Maximum
Maximum Power Rating
1 Watt
Internal Load Dissipation
0.125 Watt
Pin Temperature (10 Sec)
250°C
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to +125°C
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based
on measured results and target specifications. Commitment to produce in volume is not guaranteed.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
RoHS
Compliant
E-Series 2-Way 0° Power Divider
5 – 500 MHz
MAPD-007249-ESML21
V1P
Electrical Specifications: TA = 25°C, Z0 = 50Ω 1
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
RF Frequency
—
5 - 500
MHz
—
—
—
Insertion Loss
FL—fU
5 - 500
50 –250
250 - 500
dB
dB
dB
—
—
—
0.25
0.3
0.5
0.5
0.5
1.0
Isolation
FL—fU
5 - 500
50 –250
250 - 500
dB
dB
dB
25
24
23
50
33
30
—
—
—
Amplitude Unbalance
FL—fU
5 - 500
50 –250
250 - 500
dB
dB
dB
—
—
—
—
—
—
0.15
0.3
0.6
Phase Unbalance
FL—fU
5 - 500
50 –250
250 - 500
Degrees
Degrees
Degrees
—
—
—
—
—
—
1
2
5
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages