MURS140, MURS160 www.vishay.com Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated pallet chip junction • Ideal for automated placement • Ultrafast reverse recovery time • Low switching losses, high efficiency • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 DO-214AA (SMB) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 400 V, 600 V IFSM 35 A trr 50 ns VF 1.05 V TJ max. 175 °C Package DO-214AA (SMB) Diode variation Single die MECHANICAL DATA Case: DO-214AA (SMB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,.....) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL MURS140 MG MJ Maximum repetitive peak reverse voltage VRRM 400 600 Working peak reverse voltage VRWM 400 600 Maximum DC blocking voltage VDC 400 600 Device marking code Maximum average forward rectified current at (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range TL = 150 °C TL = 125 °C IF(AV) MURS160 UNIT V 1.0 2.0 IFSM 35 TJ, TSTG -65 to +175 A °C Revision: 20-Feb-15 Document Number: 88688 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MURS140, MURS160 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS Maximum instantaneous forward voltage VF (1) IF = 1.0 A Maximum instantaneous reverse current at DC blocking voltage IR (2) Rated VR Maximum reverse recovery time trr Maximum forward recovery time tfr MURS140 MURS160 TJ = 25 °C 1.25 TJ = 150 °C 1.05 TJ = 25 °C 5.0 TJ = 150 °C 150 IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 50 IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 10 % IRM 75 IF = 1.0 A, dI/dt = 100 A/μs, recovery to 1.0 V 50 UNIT V μA ns Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance, junction to lead MURS140 RJL MURS160 13 UNIT °C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MURS160-E3/52T 0.096 52T 750 7" diameter plastic tape and reel MURS160-E3/5BT 0.096 5BT 3200 13" diameter plastic tape and reel MURS160HE3/52T (1) 0.096 52T 750 7" diameter plastic tape and reel MURS160HE3/5BT (1) 0.096 5BT 3200 13" diameter plastic tape and reel MURS160HE3_A/H (1) 0.096 H 750 7" diameter plastic tape and reel MURS160HE3_A/I (1) 0.096 I 3200 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 20-Feb-15 Document Number: 88688 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MURS140, MURS160 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Reverse Leakage Current (µA) Average Forward Rectified Current (A) 6.0 5.0 4.0 3.0 2.0 1.0 0 25 50 75 100 125 150 TJ = 100 °C 0.1 0.01 TJ = 25 °C 0 175 20 40 60 80 100 Lead Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics 100 Junction Capacitance (pF) 50 Peak Forward Surge Current (A) 1 0.001 0 40 30 20 10 1 10 100 Number of Cycles at 50 Hz 100 TJ = 175 °C 10 TJ = 100 °C TJ = 25 °C 0.1 0.01 0 0.4 0.8 1.2 1.6 10 1 10 100 Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 1 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1 0.1 0 Instantaneous Forward Current (A) TJ = 175 °C 10 2.0 2.4 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance Revision: 20-Feb-15 Document Number: 88688 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MURS140, MURS160 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 (5.59) REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Revision: 20-Feb-15 Document Number: 88688 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: MURS140-E3/52T MURS140/52T MURS140-E3/5BT MURS140HE3/5BT MURS160/2T MURS160/52T MURS160-E3/52T MURS160-E3/5BT MURS160HE3/52T MURS160HE3/5BT MURS140/5T MURS160-E3/2CT MURS160HE3/2CT MURS160-E3/51T MURS160-E3/5T MURS160-E3/55T MURS160/5T MURS160HE3/55T MURS160/1T