JAE FI-J30S-VF15N-R3000 Thin wire coaxial connector for small portable device Datasheet

COMPONENTS PRODUCT INFORMATION
NEW
Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR
MB-0143-3
October 2008
FI-J Series
RoHS Compliant
The FI-J Series is a thin-wire coaxial connector compatible with 42 and 44 AWG
wires, and it is ideally suited for compact devices. The FI-J achieves remarkable
space saving on the board and is small enough to pass through a narrow hinge
after the harness is assembled.
Features
„Plug side can pass through 3.6mm dia. hinge after harness assembly. (40 position,
42 AWG)
„2.5mm depth, 21.7mm width (for 40 position), with 1.58mm height when mated
„Stable connection ensured by 0.4mm effective contact length
„Highly reliable structure of supporting the contact points with each contact
„Enhanced connection stability with gold-plated ground contact points on plug and
receptacle
„Mis-mating prevention structure
„Compatible with 42 and 44 AWG wires. (Proven harness assembly compliance)
„Receptacle side: Available on embossed tape for automatic mounting
„Receptacle side: Solder migration prevention structure with Ni barrier
1/7
JAE PMK Div. Proprietary. Copyright © 2008,Japan Aviation Electronics Industry, Ltd.
MB-0143-3
General Specifications
„No. of contacts : 20, 25, 30, 35, 40 pos.
„Pitch: 0.4mm
„Operating Temperature:
-40 Deg. C to +85 Deg. C
„Contact Resistance: 40m ohm max.
„Life Time: 30 times
„Rated Current: AC, DC each 0.3A per pos.
„Rated Voltage: AC, DC each 50V per pos.
„Insulation Resistance: 100M ohm min.
„Dielectric Withstanding Voltage :
AC 250Vr. m.s per minute
„Applicable Cable: 42 to 44 AWG
Materials and Finishes
Component
Contact
Hold down
Material / Finish
Receptacle(FI-J**S-VF15N)
Copper alloy / Contact portion and terminal portion:
Au flash plating over Ni
Copper alloy / Contact portion and terminal portion:
Au flash plating over Ni
Insulator
Heat resistant plastic UL94V-0
Adsorption Insulator
Heat resistant plastic UL94V-0
Contact
Plug(FI-J**C5 / FI-J**C2-SH-D)
Copper alloy / Contact portion and terminal portion:
Au flash plating over Ni
Insulator
Heat resistant plastic UL94V-0
Shell
Stainless steel / Au plating over Ni
2/7
JAE PMK Div. Proprietary. Copyright © 2008,Japan Aviation Electronics Industry, Ltd.
MB-0143-3
Ordering Information
FI-J
Receptacle Side
Individual Product (SJ104705)
** S - VF 15N
Modification Code 15N: General
Series
Vertical Type
No. of Contacts:
20,25,30,35,40
Socket Side
Unit: mm
Recommended dimension of board
Dimension Chart
Drawing when mated
(for reference)
3/7
JAE PMK Div. Proprietary. Copyright © 2008,Japan Aviation Electronics Industry, Ltd.
MB-0143-3
Ordering Information
Receptacle Side
Embossed Product (SJ104708)
FI-J ** S - VF 15N - R3000
Embossed Reel 3000pcs.
Series
Modification Code 15N: General
No. of Contacts:
20,25,30,35,40
Vertical Type
Socket Side
Unit: mm
Dimension chart
* One lane for 20 pos. type is carrier.
4/7
JAE PMK Div. Proprietary. Copyright © 2008,Japan Aviation Electronics Industry, Ltd.
MB-0143-3
Ordering Information
FI-J
Plug Side, Insulator (SJ106631)
**
C
Series
5
Modification Code 5: General
No. of Contacts:
20,25,30,35,40 pos.
Plug Side
Unit: mm
Dimension Chart
5/7
JAE PMK Div. Proprietary. Copyright © 2008,Japan Aviation Electronics Industry, Ltd.
MB-0143-3
Ordering Information
Plug Side, Shell (SJ104707)
FI-J ** C2 - SH - D
Modification Code D : General
Series
Shell
No. of Contacts:
20,25,30,35,40
Plug Side
Unit: mm
Dimension Chart
6/7
JAE PMK Div. Proprietary. Copyright © 2008,Japan Aviation Electronics Industry, Ltd.
MB-0143-3
Related Documents
• Product Specification Chart (JACS):
JACS-10217
• Harness Assembly Handling Instructions (JAHL):
JAHL-10217-04
• Connector Handling Instructions (JAHL):
JAHL-10217-20
• Connector Insertion /Extraction Tools:
Drawing No. : SJ713182-00
Part Number: SC-FIJ-1
Handling Instructions: T713182
Notice: Products shown in this leaflet are
Japan Aviation Electronics Industry, Limited
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: computers, office
machines, measuring devices,
telecommunication devices (terminals, mobile
devices), AV devices, household applications, FA
devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2008,Japan Aviation Electronics Industry, Ltd.
7/7
Similar pages