Kersemi MBR20H200CT Plastic package has underwriters laboratory flammability classification 94v-0 Datasheet

MBR20H200CT, MBRF20H200CT & MBRB20H200CT-1 Series
Reverse Voltage 200V
Forward Current 20A
Max. Junction Temperature 175°C
Features
TO-220AB (MBR20H200CT)
0.055 (1.40)
0.047 (1.20)
0.398 (10.10)
0.185 (4.70)
0.382 (8.70)
0.169 (4.30)
0.150 (3.80)
0.343 (8.70) Typ.
0.139 (3.54)
0.055 (1.40)
Dia.
0.049 (1.25)
0.114 (2.90)
0.106 (2.70)
0.154 (3.90)
0.138 (3.50)
0.067
(1.70) Typ.
PIN
2
1
0.638 (16.20)
0.598 (15.20)
0.634 (16.10)
0.618 (15.70)
0.331 (8.40) Typ.
3
0.370 (9.40)
0.354 (9.00)
1.161 (29.48)
1.105 (28.08)
0.118
(3.00) Typ.
0.102 (2.60)
0.087 (2.20)
0.035 (0.90)
0.028 (0.70)
PIN 1
PIN 2
PIN 3
CASE
0.064 (1.62)
0.056 (1.42)
0.100
(2.54) Typ.
0.523 (13.28)
0.507 (12.88)
0.024 (0.60)
0.018 (0.45)
0.200 (5.08) Typ.
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Dual rectifier construction, positive center tap
• Metal silicon junction, majority carrier conduction
• Low leakage current, Low power loss, High efficiency
• Guardring for overvoltage protection
• For use in high frequency switching power supplies and
converters with up to 48V output, free wheeling, and
polarity protection applications
• Rated for reverse surge and ESD
Mechanical Data
Case: JEDEC TO-220AB, ITO-220AB, TO-262AA
molded plastic body
Terminals: Plated leads, solderable per
MIL-STD-750, Method 2026
High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case (TO-220AB,
ITO-220AB) at terminals (TO-236AB)
Polarity: As marked Mounting Position: Any
Mounting Torque: 10 in-lbs maximum
Weight: 0.08 oz., 2.24 g
Dimensions in inches
and (millimeters)
ITO-220AB (MBRF20H200CT)
0.408 (10.36)
1.29 (3.28)
0.392 (9.96)
1.21 (3.08)
TO-262AA (MBRB20H200CT-1)
0.108 (2.74)
Dia.
0.398 (10.10)
0.382 (9.70)
0.092 (2.34)
0.138 (3.50)
0.122 (3.10)
0.633 (16.07)
0.601 (15.67)
0.370 (9.40)
0.354 (9.00)
0.370 (9.39)
0.354 (8.99)
1
PIN
2
3
1
PIN
2
3
0.102 (2.60)
0.087 (2.20)
1.164 (29.55)
1.108 (28.15)
0.117 (2.96)
PIN 1
PIN 2
PIN 3
CASE
0.531 (13.48)
0.507 (12.88)
0.523 (13.28)
0.507 (12.88)
0.035 (0.90)
0.028 (0.70)
0.039 (1.00)
0.024 (0.60)
0.100
(2.54) Typ.
0.058 (1.47) Typ.
0.200 (5.08) Typ.
0.024 (0.60)
0.018 (0.45)
0.425 (10.80)
0.393 (10.00)
0.488 (12.4)
0.472 (12.00)
0.101 (2.56)
0.396 (10.05)
0.372 (9.45)
0.055 (1.40)
0.049 (1.25)
K
0.141 (3.58)
0.125 (3.18)
0.630 (16.00)
0.614 (15.60)
0.185 (4.70)
0.169 (4.30)
0.055 (1.40)
0.039 (1.00)
0.100
(2.54) Typ.
0.405 (10.28)
0.389 (9.88)
0.062 (1.57)
0.054 (1.37)
0.024 (0.60)
0.018 (0.45)
0.200 (5.08) Typ.
PIN 1
PIN 2
PIN 3
CASE
www.kersemi.com
1
MBR20H200CT, MBRF20H200CT & MBRB20H200CT-1 Series
Maximum Ratings
(TC = 25°C unless otherwise noted)
Parameter
Symbol MBR20H200CT MBRF20H200CT MBRB20H200CT-1 Unit
Maximum repetitive peak reverse voltage
VRRM
200
V
Working peak reverse voltage
VRWM
200
V
Maximum DC blocking voltage
VDC
200
V
Maximum average forward rectified current Total device
(Fig. 1)
Per leg
IF(AV)
20
10
A
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) per leg
IFSM
290
A
Peak repetitive reverse current per leg at tp = 2µs, 1KHZ
IRRM
1.0
A
Peak non-repetitive reverse surge energy
(8/20µs waveform)
ERSM
20
mJ
Non-repetitive avalanche energy per leg
at 25°C, EAS = 2.0A, L=10mH
EAS
20
mJ
Electrostatic discharge capacitor voltage
Human body model: C = 100pF, R = 1.5KΩ
VC
25
KV
dv/dt
10,000
V/µs
TJ, TSTG
–65 to +175
°C
Voltage rate of change (rated VR)
Operating junction and storage temperature range
(1)
RMS Isolation voltage (MBRF type only) from terminals
to heatsink with t = 1 second, RH ≤ 30%
Electrical Characteristics (T
C
IF =
IF =
IF =
IF =
10A,
10A,
20A,
20A,
Symbol
Typical
Maximum
Unit
25°C
125°C
25°C
125°C
VF
0.81
0.65
0.87
0.74
0.88
0.75
0.97
0.85
V
TJ = 25°C
TJ = 125°C
IR
5.0
1.0
µA
mA
CJ
250
pF
Tj =
Tj =
Tj =
Tj =
Maximum reverse current per leg
at working peak reverse voltage(4)
Typical junction capacitance at 4.0V, 1MHZ
Thermal Characteristics (T
C
V
= 25°C unless otherwise noted)
Parameter
Maximum instantaneous
forward voltage per leg at:
4500
3500 (2)
1500 (3)
VISOL
= 25°C unless otherwise noted)
Parameter
Typical thermal resistance per leg
Symbol
MBR
MBRF
MBRB
Unit
RΘJC
2.0
4.0
2.0
°C/W
Notes:
(1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset
(2) Clip mounting (on case), where leads does overlap heatsink
(3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.97”)
(4) Pulse test: 300µs pulse width, 1% duty cycle
Ordering Information
Product
Case
Package Code
Package Option
MBR20H200CT
TO-220AB
45
Anti-Static tube, 50/tube, 1K/carton
MBRF20H200CT
TO-200AB
45
Anti-Static tube, 50/tube, 1K/carton
MBRB20H200CT-1
TO-262AA
45
Anti-Static tube, 50/tube, 1K/carton
www.kersemi.com
2
MBR20H200CT, MBRF20H200CT & MBRB20H200CT-1 Series
(TA = 25°C unless otherwise noted)
Fig. 1 – Forward Derating Curve
Fig. 2 – Maximum Non-Repetitive
Peak Forward Surge Current
350
325
MBR, MBRB
Average Forward Current (A)
Average Forward Current (A)
25
20
MBRF
15
10
5
0
50
75
100
125
150
150
125
100
75
50
25
0
1
10
100
Case Temperature (°C)
Number of Cycles at 60 HZ
Fig. 3 – Typical Instantaneous
Forward Characteristics
Fig. 4 – Typical Reverse
Characteristics
100
10,000
TJ = 175°C
1,000
TJ = 175°C
10
TJ = 125°C
TJ = 75°C
1
TJ = 25°C
0.1
0.1
100
TJ = 125°C
10
TJ = 75°C
1
TJ = 25°C
0.1
0.01
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0 1.1
10
20
30
40
50
60
70
80
90
Instantaneous Forward Voltage (V)
Percent of Rated Peak Reverse Voltage (%)
Fig. 5 – Typical Junction Capacitance
Fig. 6 – Typical Transient
Thermal Impedance Per Leg
Transient Thermal Impedance (°C/W)
1000
100
10
0.1
100
100
10000
Junction Capacitance (pF)
275
250
225
200
175
175
IR -- Instantaneous
Reverse Current (µA)
IF -- Instantaneous Forward Current (A)
25
300
1
10
Reverse Voltage (V)
100
10
MBRF
1
0.1
0.01
MBR, MBRB
0.1
1
10
100
t -- Pulse Duration (sec.)
www.kersemi.com
3
Similar pages