Ecliptek EV34C6A3A1 Oscillator Datasheet

EV34C6 Series
• RoHS Compliant (Pb-Free)
• Voltage Controlled Crystal Oscillator (VCXO)
• 2.5V Supply Voltage
• LVCMOS output with Tri-State function
• Ceramic 6-pad SMD package
• APR Performance to ±100ppm
• Commercial and Industrial Temperature Range
EV34C6
H
L
W
1.65
7.0
5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
1.544MHz, 2.000MHz, 2.048MHz, 3.088MHz, 3.580MHz, 3.686MHz, 4.000MHz, 4.032MHz, 4.096MHz, 4.434MHz,
5.000MHz, 6.144MHz, 6.176MHz, 6.312MHz, 6.400MHz, 8.000MHz, 8.192MHz, 8.448MHz, 10.000MHz,
12.000MHz, 12.288MHz, 12.352MHz, 12.960MHz, 13.000MHz, 13.500MHz, 14.318MHz, 15.360MHz, 15.440MHz,
16.000MHz, 16.384MHz, 16.660MHz, 17.664MHz, 18.432MHz, 19.200MHz, 19.440MHz, 20.000MHz, 20.480MHz,
24.000MHz, 24.576MHz, 24.704MHz, 25.000MHz, 25.920MHz, 26.000MHz, 27.000MHz, 28.636MHz, 30.000MHz,
30.720MHz, 32.000MHz, 32.768MHz, 34.368MHz, 35.328MHz, 36.864MHz, 38.880MHz, 40.000MHz, 40.960MHz,
44.736MHz, 49.152MHz, 50.000MHz, 51.840MHz, 52.000MHz, 62.208MHz, 65.536MHz, 74.250MHz, 77.760MHz
Operating Temperature Range (OTR)
0°C to +70°C or -40°C to +85°C
Storage Temperature Range (STR)
-55°C to 125°C
Supply Voltage (VDD)
2.5VDC ±5%
Input Current (IDD)
15mA Maximum
Frequency Tolerance/Stability
Inclusive of All Conditions: Calibration Tolerance at 25°C,
±50ppm Maximum
Frequency Stability over the Operating Temperature Range, Supply
Voltage Change, Output Load Change, Shock, and Vibration.
Output Voltage Logic High (VOH)
IOH = -4mA
90% of VDD Minimum
Output Voltage Logic Low (VOL)
IOL = +4mA
10% of VDD Maximum
Rise Time / Fall Time (TR/TF)
20% to 80% of Waveform
5 nSeconds Maximum
Duty Cycle (SYM)
at 50% of Waveform
50 ±5(%) Typical, 50 ±10(%) Maximum
Load Drive Capability (CLOAD)
15pF Maximum
Aging (at 25°C)
±2ppm/1st year typical, ±10ppm /10 years Max.
Start Up Time (TS)
10 mSeconds Maximum
Tri-State Input Voltage
VIH: No Connection
Enables Output
VIH: >0.9VDD
Enables Output
VIL: <0.1VDD
Disables Output: High Impedance
RMS Phase Jitter
FJ=12kHz to 20MHz
1pSec Maximum
Absolute Pull Range (APR)
Inclusive of All Conditions: Calibration Tolerance at 25°C,
±50ppm Minimum
Frequency Stability over the Operating Temperature Range, Supply ±80ppm Minimum < 51.840MHz only
Voltage Change, Output Load Change, Shock, Vibration, and Aging ±100ppm Minimum < 36.000MHz only
over Control Voltage (VC)
Linearity
10% Typical, 20% Maximum
Control Voltage (VC): Test Conditions for APR
0.2VDC to 2.3VDC
Control Voltage Range (VCR)
0.0VDC to VDD
Transfer Function
Positive Transfer Characteristic
Input Impedance (ZI)
50kOhms Minimum
Input Leakage Current
10µA Maximum
Modulation Bandwidth (MBW)
-3dB, VC = 1.25VDC
10kHz Minimum
Typical Phase Noise (Fo = 27.000MHz)
At offset of 10Hz
-65dBc/Hz
At offset of 100Hz
-95dBc/Hz
At offset of 1kHz
-120dBc/Hz
At offset of 10kHz
-142dBc/Hz
At offset of 100kHz
-152dBc/Hz
At offset of 1MHz
-154dBc/Hz
Frequency Range (FO)
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EV34C6
CERAMIC
2.5V
OS7J
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
09/09
Specifications subject to change without notice.
PART NUMBERING GUIDE
EV34C6 B 3 A 1 - 35.328M TR
AVAILABLE OPTIONS
Blank=Bulk (Standard)
TR=Tape and Reel
OPERATING TEMPERATURE RANGE
A=0°C to +70°C,
B=-40°C to +85°C
FREQUENCY
ABSOLUTE PULL RANGE (APR)
3=±50ppm Minimum
4=±80ppm Minimum
5=±100ppm Minimum
DUTY CYCLE
1=50 ±5(%) Typical, 50 ±10(%) Maximum
LINEARITY
A=10% Typical, 20% Maximum
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Control Voltage (VC)
Pin 2: Tri-State
Pin 3: Case Ground
TAPE AND REEL DIMENSIONS
Pin 4: Output
Pin 5: No Connect
Pin 6: Supply Voltage
Tolerances= +0.1
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
B
C
D
E
16±.3-.1
7.5±.1
6.75±.1
4 ±.1
2±.1
F
G
H
J
K
8±.1
B0*
1.5 +.1-0
A0*
.3 ±.05
F
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
REEL
L
K0*
R
S
T
U
V
2.5 MIN
10 MIN
22.4 MAX
360 MAX
16.4+2-0
*Compliant to EIA 481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Specification
ESD Susceptibility
Fine Leak Test
Flammability
Gross Leak Test
Mechanical Shock
Moisture Resistance
Moisture Sensitivity
Resistance to Soldering Heat
Resistance to Solvents
Solderability
Temperature Cycling
Vibration
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
MIL-STD-883, Method 1014, Condition A
UL94-V0
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 1004
J-STD-020, MSL 1
MIL-STD-202, Method 210, Condition K
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
MIL-STD-883, Method 1010, Condition B
MIL-STD-883, Method 2007, Condition A
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EV34C6
CERAMIC
2.5V
OS7J
09/09
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages