TDK GLF201208T100M Glf,glc sery Datasheet

TDK’s New Winding Type
Chip Inductor
GLF,GLC Series
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Item Line-Up
Height[mm]
0.80mm
2
Area[mm ]
GLF1608Type
1.28mm2
1.60X0.80
L:1uH to 22uH
4.50mm2
2.00X1.25
1.80mm
GLF_Type:Low Rdc Type
GLF_Type:Low Profile Type
Rdc:0.70ohm(10uH)
Idc:90mA(10uH)
2.50mm2
1.25mm
GLC_Type:High Idc Type
GLF201208Type
GLF2012Type
L:1uH to 47uH
L:1uH to 100uH
Rdc:1.10ohm(10uH)
Rdc:0.36ohm(10uH)
Idc:170mA(10uH)
Idc:140mA(10uH)
2.50X1.80
GLF251812Type
GLF2518Type
L:1uH to 100uH
L:1uH to 100uH
Rdc:0.60ohm(10uH)
Rdc:0.20ohm(10uH)
Idc:325mA(10uH)
Idc:210mA(10uH)
GLC2518Type
L:1uH to 100uH
Rdc:0.30ohm(10uH)
Idc:300mA(10uH)
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
‚ g
Shapes and Dimensions
‚ a‚ P
‚ a‚ Q
‚ k
‚ v
L
[mm]
W
[mm]
H
[mm]
B1
[mm]
B2
[mm]
±0.10
±0.10
±0.10
±0.15
±0.15
GLF1608Type
1.60
0.80
0.80
0.40
0.40
5mg
GLF2012Type
2.00
1.25
1.25
0.50
0.50
15mg
GLF2518Type
2.50
1.80
1.80
0.60
0.60
35mg
GLF201208Type
2.00
1.25
0.80
0.45
0.45
10mg
GLF251812Type
2.50
1.80
1.25
0.50
0.50
25mg
GLC2518Type
2.50
1.80
1.80
0.60
0.60
35mg
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Weight
[mg]
Electrical Characteristics [GLF1608Type]
Inductance
ITEM
Rdc[ohm]
&
Idc[mA]
L:10%Down
L:20%Down
temp. has to 20Deg.C
Tolerance
±30%
Max.
Max.
Max.
GLF1608T1R0M
1.0µH±20%
0.17
125
220
400
GLF1608T2R2M
2.2µH±20%
0.33
85
160
275
GLF1608T4R7M
4.7µH±20%
0.55
70
115
220
GLF1608T100M
10µH±20%
0.70
50
90
180
GLF1608T220M
22µH±20%
3.00
35
60
100
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Electrical Characteristics [GLF2012Type]
Inductance
ITEM
Rdc[ohm]
&
Idc[mA]
L:10%Down
L:20%Down
temp. has to 20Deg.C
Tolerance
±30%
Max.
Max.
Max.
GLF2012T1R0M
1.0µH±20%
0.07
275
400
850
GLF2012T2R2M
2.2µH±20%
0.10
210
300
700
GLF2012T4R7M
4.7µH±20%
0.24
120
200
450
GLF2012T100K
10µH±10%
0.36
100
140
360
GLF2012T220K
22µH±10%
1.00
75
100
220
GLF2012T470K
47µH±10%
1.70
50
75
170
GLF2012T101K
100µH±10%
4.00
30
50
110
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Electrical Characteristics [GLF2518Type]
Inductance
ITEM
Rdc[ohm]
Idc[mA]
&
L:10%Down
L:20%Down
temp. has to 20Deg.C
Tolerance
Max.
Max.
Max.
GLF2518T1R0M
1.0µH±20%
0.05±30%
500
675
1200
GLF2518T2R2M
2.2µH±20%
0.08±30%
340
450
950
GLF2518T4R7M
4.7µH±20%
0.11±30%
240
320
800
GLF2518T100K
10µH±10%
0.20±20%
165
210
600
GLF2518T220K
22µH±10%
0.45±20%
115
150
400
GLF2518T470K
47µH±10%
0.85±20%
85
100
275
GLF2518T101K
100µH±10%
1.90±20%
55
75
175
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Electrical Characteristics [GLF201208Type]
Inductance
ITEM
Rdc[ohm]
Idc[mA]
&
L:10%Down
L:20%Down
temp. has to 20Deg.C
Tolerance
Max.
Max.
Max.
GLF201208T1R0M
1.0µH±20%
0.19±20%
340
460
650
GLF201208T2R2M
2.2µH±20%
0.56±20%
220
300
350
GLF201208T4R7M
4.7µH±20%
0.74±20%
160
230
300
GLF201208T100M
10µH±20%
1.10±20%
130
170
250
GLF201208T220M
22µH±20%
3.50±20%
80
110
150
GLF201208T470M
47µH±20%
5.30±20%
60
90
120
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Electrical Characteristics [GLF251812Type]
Inductance
ITEM
Rdc[ohm]
Idc[mA]
&
L:10%Down
L:20%Down
temp. has to 20Deg.C
Tolerance
Max.
Max.
Max.
GLF251812T1R0M
1.0µH±20%
0.10±20%
650
800
900
GLF251812T2R2M
2.2µH±20%
0.20±20%
450
600
625
GLF251812T4R7M
4.7µH±20%
0.38±20%
275
450
450
GLF251812T100M
10µH±20%
0.60±20%
200
325
350
GLF251812T220M
22µH±20%
1.20±20%
140
250
250
GLF251812T470M
47µH±20%
2.50±20%
100
175
175
GLF251812T101M
100µH±20%
4.70±20%
80
125
125
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Electrical Characteristics [GLC2518Type]
Inductance
ITEM
Rdc[ohm]
Idc[mA]
&
L:10%Down
L:20%Down
temp. has to 20Deg.C
Tolerance
Max.
Max.
Max.
GLC2518T1R0M 1.0µH±20%
0.08±30%
850
-----
980
GLC2518T2R2M 2.2µH±20%
0.13±30%
650
-----
750
GLC2518T4R7M 4.7µH±20%
0.20±30%
475
-----
600
GLC2518T100K
10µH±10%
0.36±20%
350
-----
470
GLC2518T220K
22µH±10%
0.90±20%
225
-----
300
GLC2518T470K
47µH±10%
1.90±20%
170
-----
200
GLC2518T101K
100µH±10%
3.50±20%
110
-----
150
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Typical Electrical Characteristics [GLF1608Type]
GLF1608T1R0M
Inductance vs. Frequency
GLF1608T2R2M
Impedance vs. Frequency
GLF1608T4R7M
1000.0
100000.0
GLF1608T1R0M
GLF1608T100M
GLF1608T220M
GLF1608T2R2M
10000.0
100.0
Impedance[ohm]
Inductance[µ
]
GLF1608T4R7M
10.0
1.0
1000.0
GLF1608T100M
GLF1608T220M
100.0
10.0
1.0
0.1
0.1
0.01
0.10
1.00
10.00
100.00
Frequency[MHz]
0.01
0.10
1.00
Frequency[MHz]
Inductance vs. DC Superposition
GLF1608T1R0M
1000.0
GLF1608T2R2M
GLF1608T4R7M
100.0
]
GLF1608T100M
Inductance[µ
GLF1608T220M
10.0
1.0
0.1
1
10
100
1000
DC Current
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
10.00
100.00
Typical Electrical Characteristics [GLF2012Type]
GLF2012T1R0M
Inductance vs. Frequency
GLF2012T2R2M
GLF2012T4R7M
Impedance vs. Frequency
GLF2012T100K
1000.0
100000.0
GLF2012T220K
GLF2012T1R0M
GLF2012T470K
GLF2012T2R2M
GLF2012T101K
GLF2012T4R7M
10000.0
GLF2012T100K
100.0
Impedance[ohm]
Inductance[µ
]
GLF2012T220K
10.0
1.0
GLF2012T470K
1000.0
GLF2012T101K
100.0
10.0
1.0
0.1
0.1
0.01
0.10
1.00
10.00
100.00
Frequency[MHz]
0.01
0.10
1.00
Frequency[MHz]
GLF2012T1R0M
Inductance vs. DC Superposition
GLF2012T2R2M
GLF2012T4R7M
GLF2012T100K
1000.0
GLF2012T220K
GLF2012T470K
GLF2012T101K
Inductance[µ
]
100.0
10.0
1.0
0.1
1.00
10.00
100.00
1000.00
DC Current
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
10.00
100.00
Typical Electrical Characteristics [GLF2518Type]
GLF2518T1R0M
Inductance vs. Frequency
GLF2518T2R2M
Impedance vs. Frequency
GLF2518T4R7M
1000.0
100000.0
GLF2518T100M
GLF2518T1R0M
GLF2518T220M
GLF2518T2R2M
GLF2518T470M
GLF2518T4R7M
10000.0
GLF2518T101M
GLF2518T100M
Impedance[ohm]
Inductance[µ
]
100.0
10.0
GLF2518T220M
GLF2518T470M
1000.0
GLF2518T101M
100.0
10.0
1.0
1.0
0.1
0.1
0.01
0.10
1.00
10.00
100.00
0.01
0.10
1.00
Frequency[MHz]
Frequency[MHz]
GLF2518T1R0M
Inductance vc. DC Superposition
GLF2518T2R2M
GLF2518T4R7M
GLF2518T100M
1000.0
GLF2518T220M
GLF2518T470M
GLF2518T101M
Inductance[µ
]
100.0
10.0
1.0
0.1
1.00
10.00
100.00
1000.00
DC Current mA
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
10.00
100.00
Typical Electrical Characteristics [GLF201208Type]
GLF201208T1R0M
Inductance vs. Frequency
GLF201208T2R2M
GLF201208T4R7M
GLF201208T1R0M
Impedance vs. Frequency
GLF201208T100M
1000.0
GLF201208T2R2M
GLF201208T4R7M
GLF201208T100M
100000.0
GLF201208T220M
GLF201208T220M
GLF201208T470M
GLF201208T470M
10000.0
Inductance[µ
]
Impedance[ohm]
100.0
10.0
1.0
1000.0
100.0
10.0
1.0
0.1
0.1
0.01
0.10
1.00
10.00
100.00
Frequency[MHz]
0.01
0.10
1.00
Frequency[MHz]
GLF201208T1R0M
Inductance vs. DC Superposition
GLF201208T2R2M
GLF201208T4R7M
GLF201208T100M
1000.0
GLF201208T220M
Inductance[µ
]
GLF201208T470M
100.0
10.0
1.0
0.1
1
10
100
DC Current
TDK Electronics Europe GmbH
- September 2004
1000
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
10.00
100.00
Typical Electrical Characteristics [GLF251812Type]
GLF251812T1R0M
GLF251812T1R0M
Inductance vs. Frequency
GLF251812T2R2M
GLF251812T4R7M
Impedance vs. Frequency
GLF251812T100M
1000.0
GLF251812T2R2M
GLF251812T4R7M
GLF251812T100M
100000.0
GLF251812T220M
GLF251812T220M
GLF251812T470M
GLF251812T470M
GLF251812T101M
Impedance[ohm]
Inductance[µ ]
100.0
10.0
1.0
GLF251812T101M
10000.0
1000.0
100.0
10.0
1.0
0.1
0.1
0.10
1.00
10.00
100.00
Frequency[MHz]
0.10
1.00
10.00
Frequency[MHz]
GLF251812T1R0M
Inductance vs. DC Superposition
GLF251812T2R2M
GLF251812T4R7M
GLF251812T100M
1000.0
GLF251812T220M
GLF251812T470M
GLF251812T101M
Inductance[µ ]
100.0
10.0
1.0
0.1
10.00
100.00
1000.00
DC Current
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
100.00
Typical Electrical Characteristics [GLC2518Type]
GLC2518T1R0M
Inductance vs. Frequency
GLC2518T2R2M
GLC2518T4R7M
1000.0
GLC2518T100K
GLC2518T1R0M
Impedance vs. Frequency
GLC2518T2R2M
GLC2518T4R7M
100000
GLC2518T100K
GLC2518T220K
GLC2518T220K
GLC2518T470K
GLC2518T470K
GLC2518T101K
10000
Z[ohm]
L[uH]
100.0
10.0
1000
100
1.0
10
0.1
1
0.1
1.0
10.0
100.0
Freq.[MHz]
0.1
1.0
10.0
Freq.[MHz]
GLC2518T1R0M
Inductance vs. DC Superposition
GLC2518T2R2M
GLC2518T4R7M
1000.0
GLC2518T100K
GLC2518T220K
GLC2518T470K
GLC2518T101K
L[uH]
100.0
10.0
1.0
0.1
1.0
10.0
100.0
1000.0
10000.0
Idc[mA]
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
100.0
GLF & GLC Series Basic Information
Ratings
Temperature rise:
20C° max.
Storage temperature range:
-40C° to 105C°
Operating temperature range: -20C° to 105C°
Country of origin
Japan
(TDK Shonai Manufacturing Corporation/Yamagata)
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
D
The Recommended Land Pattern
A
B
A
C
GLF1608Type
GLF2012Type
GLF201208Type
Dimension in [mm]
A
[mm]
0.70
B
[mm]
0.70
C
[mm]
2.10
D
[mm]
0.70
0.80
1.00
2.60
0.80
0.90
1.30
3.10
1.60
GLF2518Type
GLF251812Type
GLC2518Type
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Reliability requirements
Test Item
Tem perature characteristics
Test Condition
Specification
The test shall be perform ed after the sam ple has stabilized in an
L20
am bient tem perature of -40 to +105 ,and the value calculated based
on the value applicable in a norm al tem perature of +20 .
Therm al shock
The test shall be perform ed upon com pletion of 100 cycles in accordance
w ith the conditions in the figure below , the m easurem ent shall be m ade
TEST RESULT
±10%
L
Avg.
-40C
-3.91
20C
0.00
105C
3.81
Max.
Min.
-3.09
-4.55
0.00
0.00
4.79
2.50
Initial
Final
No m echanical dam ege.
L/Lo ±10%
L
Avg.
0.00
0.22
Max.
Min.
0.00
0.00
1.38
-0.69
the m easurem ent shall be m ade after The sam ple has been left in a
L
Avg.
Initial
0.00
Final
1.22
norm al tem perature and norm al hum idity m ore than 12hours.
Max.
0.00
3.56
Min.
0.00
-0.32
Initial
Final
after the sam ple has been left in a norm al tem perature and norm al
hum idity m ore than 12hours.
+105
+20
-40
30m in 30m in
1c yc le
Low tem perature storage
This test shall be perform ed upon com pletion of 1000±12hours in an
atm osphere w ith a tem perature of -40±2 Upon com pletion of the test,
Continuous operation
in high tem perature
The sam ple shall be left for 1000±12hours in an atm osphere w ith a
tem perature of +105±2 , under supplying rated current.Upon
No m echanical dam ege.
L/Lo ±10%
No m echanical dam ege.
L/Lo ±10%
Avg.
0.00
0.75
has been left in a norm al tem perature and norm al hum idiy m ore than
Max.
Min.
0.00
0.00
1.52
0.22
Initial
Final
12hours.
Continuous operation
in m oisture
L
com pletion of the test, the m easurem ent shall be m ade after the sam ple
The sam ple shall be left for 1000±12hours in an atm osphere w ith a
tem perature of +60±3 and a hum idity(RH)of 90-95%,under
No m echanical dam ege.
L/Lo ±10%
L
supplying rated current.Upon com pletion of the test,the m easurem ent
Avg.
0.00
0.51
shall be m ade after the sam ple has been left in a norm al tem prature
Max.
Min.
0.00
0.00
2.14
-0.49
and norm al hum idity m ora than 12hours.
12hours.
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Recommended Soldering Conditions
Reflow Soldering
300C°
Resistance to Soldering Heat Condition
Solderability Condition
Peak 260C°
Temperature[C°]
Peak 230C°
200C°
200C°/
30sec.
100C°
200C°/
Preheating
100C°-150C°/120 sec.
70sec.
Preheating
140C°-180C°/120 sec.
Time [sec.]
TDK Electronics Europe GmbH - September 2004
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
Technical Part and Leader Part Tape
Blank
160x260mm
Leader
400x560mm
Components
Packing number
Reel Dimension
13
GLF201208Type
4,000pieces
2. 0 0}. 5
13
0}. 2
21
0}. 8
ƒ Ó
60+1/ - 0
GLF1608Type
GLF2012Type
GLF2518Type
GLF251812Type
GLC2518Type
TDK Electronics Europe GmbH - September 2004
1}. 4
2,000pieces
ƒ Ó
180+0/ - 3
Copyright 2004 by TDK Electronics Europe GmbH. All rights reserved.
9. 0
0}. 3
Similar pages