POWER NLP65 Series Single, Dual and Triple Output Data Sheet Total Power: 65 - 75 W Input Voltage: 85 - 264 Vac 120 - 370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3” x 5” footprint Low profile fits 1U applications EN61000-3-2 compliance option (HCC) Overvoltage and short circuit protection 65 W with free air convection cooling EN55022, EN55011 conducted emissions level B EN61000-4-2,-3,-4, -5, -6 immunity compliant RoHS compliant LPX80 enclosure kit available Two year warranty SAFETY VDE0805/EN60950-1 File No. 1040100-3336-0096 License No. 114404 UL 60950-1 cUL 60950-1 CCC 60950-1 CE LVD Directive *NLP65-76xx version only Electrical Specifications Input Input voltage range Universal input (see Note 2) NLP65-76xx version only Input frequency range 85 - 264 Vac 120 - 370 Vdc 47 - 63 Hz Input current (cold start) 120 Vac 230 Vac 17 A max. 32 A max Safety ground leakage current 120 Vac, 60 Hz 230 Vac, 50 Hz 0.7 mA 1.4 mA Input current 120 Vac, with PFC 230 Vac, with PFC 120 Vac, without PFC 230 Vac, without PFC 1.4 A 0.51 A rms 1.40 A rms 0.80 A rms Input fuse UL/IEC127 5 A, 250 Vac In live and neutral Total regulation (line and load) Main output Auxiliary outputs ±2.0% ±5.0% Rise time At turn-on 1.0 s, max Transient response Main output 25% step at 0.1 A/µs 5.0% or 250 mV max. dev., 1ms max. recovery to 1% Output Temperature coefficient ±0.02%/°C Overvoltage protection Main outputs 125%, ±10% Short circuit protection Cyclic operation Continuous Minimum output current Single and multiple (See Note 6) NLP65 Series Data Sheet All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. EMC Charateristics (11, 12) Conducted emissions EN55022, FCC part 15 Level B ESD air EN61000-4-2, level 3 Perf. criteria 1 ESD contact EN61000-4-2, level 4 Perf. criteria 1 Surge EN61000-4-5, level 3 Perf. criteria 1 Fast transients EN61000-4-4, level 3 Perf. criteria 1 Radiated immunity EN61000-4-3, level 3 Perf. criteria 2 Conducted immunity EN61000-4-6, level 3 Perf. criteria 2 120 Vac, 60 Hz 230 Vac, 50 Hz 120 Vac, 65 W 16 ms @ 65 W 78 ms @ 65 W 72% typical Isolation voltage Input/output Input/chassis 3000 Vac 1500 Vac Switching frequency Approvals and standards (see Notes 9, 13) Weight Fixed EN60950-1, IEC60950-1 100 kHz, ±5 kHz MTBF demonstrated MIL-HDBK-217F General Specifications Hold-up time Efficiency 283 g (10 oz) 150,000 hours min Environmental Specifications Thermal performance: Operating (See derating curve) 0° C to +70 °C (See notes 1, 3, 10) Non-operating -40 °C to +85 °C 50 °C - 70 °C ambient, convection cooled Derate to 50% load 0 °C to 50 °C, ambient, convection cooled 65 W 0 °C to 50 °C, ambient 20CFM forced air (See Note 10) 75 W Peak (0 °C to 50 °C, 60 s) See table Relative humidity Non-condensing 5 to 95% RH Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Vibration (See Note 5) 5-500 Hz 2.4 G rms peak Shock per MIL-STD-810E 516.4 Part IV NLP65 Series Data Sheet Output Current Output Voltage +5 V (IA) Max(1) 7.5 A Peak(3) Fan(10) 9.1 A 8A Total Non-Harmonic Harmonic Ground Regulation(6) Corrected Corrected Pin (12, 14, 17) 50 mV ±2.0% NLP65-7608J NLP65-9608J(a) NLP65-X608GJ NLP65-7610J NLP65-9610J NLP65-X610GJ NLP65-7620J NLP65-9620J NLP65-X620GJ NLP65-7629J NLP65-9629J NLP65-X629GJ Ripple(4) +12 V (IB) 2.5 A 3.3 A 3A 150 mV ±5.0% –12 V 0.65 A 0.81 A 0.8 A 120 mV ±5.0% +5 V (IA) 7.5 A 9.1 A 8A 50 mV ±2.0% +15 V (IB) 2.2 A 2.9 A 2.5 A 150 mV ±5.0% –15 V 0.65 A 0.85 A 0.8 A 150 mV ±5.0% +5 V 7.0 A 9.1 A 8.0 A 50 mV ±2.0% +24 V 1.5 A 2.6 A 2.0 A 240 mV ±5.0% +12 V 0.7 A 1.0 A 1.0 A 120 mV ±5.0% NLP65-3322J(15) +5 V (IA) 7A 9.1 A 8A 50 mV ±2.0% +24 V (IB) 2A 2.6 A 2A 240 mV ±5.0% +5 V (IA) 7A 9.1 A 8A 50 mV ±2.0% +12 V (IB) 2.5 A 3.3 A 3A 150 mV ±5.0% +5 V 10 A 13 A 12 A 50 mV ±2.0% NLP65-7605J NLP65-9605J NLP65-X605GJ +12 V 5.4 A 7A 6.5 A 120 mV ±2.0% NLP65-7612J NLP65-9612J NLP65-X612GJ +24 V 2.7 A 3.5 A 3.5 A 240 mV ±2.0% NLP65-7624J NLP65-9624J NLP65-X624GJ Notes 1. Natural convection cooling. Models NLP65-X629J, NLP65-X608J, NLP65-X610J must not exceed 62.5 Watts continuous output power with natural convection. Model NLP65-X620J not to exceed 65 Watts continuous output power with natural convection. Model NLP65-3322J must not exceed 60 Watts continuous output power with natural convection. 2. When the input voltage is less than 90 Vac the operating temperature range is 0 °C to +40 °C. The ripple and regulation specifications may not be met. 3. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total regulation limits. 4. Figure is peak-to-peak for convection power rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 µF electrolytic capacitor and a 0.1 µF ceramic capacitor. 5. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz. 6. A minimum load on the main output is required for proper start up. For multiple outputs and single +5V output, the minimum load on the +5 V is 0.2 A. For single outputs greater than +5 V the minimum load is 0.1 A. To maintain stated regulation then: for single output units I ≥ 0.2 A for multiple output units 0.25≤I(A)/I(B)≤ 5, for I(A) ≥ 0.2 A. 7. For optimum reliability, no part of the heatsink should exceed 120 °C, and no semiconductor case temperature should exceed 130 °C. 8. CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. 9. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. 10. Maximum continuous output power for all multiple output models must not exceed 75 Watts (70 watts for NLP65-3322J) with 20 CFM forced air cooling. NLP65 Series Data Sheet 11. Conducted emissions testing were performed using the standard EN55022 set-up with a stand alone NLP65 unit placed on a grounded metal plate with a line choke on the AC input and ground wires (i.e. the wires are looped through an EMI suppression toroid). For system compliance it is usually necessary to install an ‘off-the-shelf’ AC inlet with an integral line filter in the system chassis or to install a line choke on the input wires as close as possible to AC entry point of the system chasssis. Please contact the applications group for assistance with EMI compliance. 12. The NLP65 units with the suffix ‘G’ is the ground pin and ground choke option. J2, L6 and JP10 are included. J2 is a safety agency approved grounding pin, L6 is a ground choke and JP10 is a jumper. This option is intended for use in non-metallic chassis applications where grounding is not possible via the mounting screws. The ground choke is provided to assist system EMC compliance. When performing conducted emissions testing on stand alone units, the ‘G’ option is required to meet level B. To order simply add the suffix ‘G’ to the standard model number, e.g. NLP65-7608GJ, NLP65-9608GJ. This option is available for both the PFC and non-PFC versions. 13. All models require a minimum mounting stand-off of 0.25 inches (6.35 mm) in the end use product. 14. The NLP65-9608J is available with an enclosure. To order an enclosed version, use NLP65-9608EJ. 15. No PFC version, EN61000-3-2 is not applicable to this model. 16. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. 17. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.artesyn.com/power Model Numbering Options a) The enclosure version NLP65-9608EJ includes: IEC connector, on/off switch, wire harness output connector and fitted cover. To order, please add the suffix ‘E’ the model number. See NLP65 enclosure for details. b) A Safety earth ground pin and ground choke are available as an option. To order, please add the suffix ‘G’ the model number, e.g. NLP65-X608GJ. c) To order an enclosure kit (unfitted), order the part number LPX80. Mechanical Drawing 5.00 (127.00) 4.550 (115.57) J1 3 N 0.225 (5.715) J3 1 1 L 3.00 (76.20) 6 T1 T1 J2 2.550 (64.770) C19 Mounting Hole Diameter 0.156 (4.00) ALL DIMENSIONSIN INCHES (mm) MAXIMUM COMPONENT HEIGHT 1.26 (32.00) TOLERANCE: .xxx 0.005" .xx 0.02" NLP65 Series Data Sheet Input Pin Connections J1 Pin 1 AC Line Pin 2 No Pin Pin 3 AC Neutral J2 (On ‘G’ Suffic Only) Pin 1 Safety Ground Output Pin Connections J3 SINGLE DUAL TRIPLE Pin 1 V (A) V (B) V (B) Pin 2 V (A) V (A) V (A) Pin 3 V (A) V (A) V (A) Pin 4 Return Return Return Pin 5 Return Return Return Pin 6 Return N/C V (C) Input and Output Connectors Mating Connectors AC (J1) Molex 26-60-4030 type or equivalent Molex 09-50-3031 or equivalent with Molex 08-52-0113 or equivalent crimp terminals DC (J3) Molex 26-60-4060 or equivalent Molex 09-50-3061 with Molex 2478 phosphor bronze crimp terminals or equivalent. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] NLP65 Series-DS 21Mar2016