IXYS CPC7556NTR Monolithic construction Datasheet

CPC7556
Diode Bridge with Integrated
Adjustable OVP Circuit
INTEGRATED CIRCUITS DIVISION
Bridge Characteristics
Parameter
Description
Rating
Units
Reverse Voltage
100
V
Forward Current
240
mArms
Thyristor Current
120
mA
Features
• Monolithic Construction
• Surface Mount Package
Applications
• Telecommunications Protection Clamp
• High Voltage Multiplexer/Switch
• High Voltage ESD Clamp
100V Diode Bridge with an integrated Over-Voltage
Protection (OVP) thyristor uses IXYS Integrated
Circuits Division's High Voltage SOI technology.
The CPC7556N integrated diode bridge offers
protection from high voltage transients by means of an
adjustable voltage clamp. The clamp performs two
actions, first to limit the voltage across the diode
bridge rectified outputs to a value determined by
external resistors and the gate voltage and second to
fully discharge the V+ to V outputs when the Gate’s
trigger threshold is exceeded during the voltage
limiting function. The rectified outputs are discharged
as a result of the voltage fold-back function of the OVP
device. Voltage fold back of the OVP circuit will
continue until the current through the protector falls
below the hold current threshold.
Terminating the gate to V will disable the clamp
voltage feature up to the thyristor’s off state voltage.
Ordering Information
e3
Pb
Part
Description
CPC7556N
8-Pin SOIC in Tubes (100/Tube)
CPC7556NTR 8-Pin SOIC Tape & Reel (2000/Reel)
CPC7556N Diagram
A/B
+
A
K
B/A
G
-
DS-CPC7556-R04
www.ixysic.com
1
CPC7556
INTEGRATED CIRCUITS DIVISION
1 Specifications
1.2 Pin Description
1.1 Package Pinout
8
1
Pin#
Name
Description
1

Negative Bridge Output
2
G
Thyristor Gate
3
N/C
No Connection
4
+
Positive Bridge Output
-
~B
G
N/C
N/C
N/C
5
~A
Input A
+
~A
6
N/C
No Connection
7
N/C
No Connection
8
~B
Input B
4
5
1.3 Absolute Maximum Ratings
Unless Otherwise Specified all electrical ratings are at 25C
Parameter
Symbol
Minimum
Maximum
Units
VRRM
-
120
V
IF
-
250
mArms
Diode Forward Surge Current
IFSM
-
2
A
Gate Voltage
VGK
-4
7
V
Gate Current
IGK
-
20
mA
Overvoltage Current
IAK
-
120
mA
Thyristor Surge Current
ITSM
-
1.2
A
2
It
-
0.02
A2s
-
-
3
kV
TJ
-
+150
C
TSTG
-65
+150
C
Reverse Voltage
Diode Forward Current (Average)
Fusing Current
ESD, Human Body Model
Junction Temperature
1
Storage Temperature
1
Derate package for PDISS 120C/W.
Absolute maximum ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
R04
www.ixysic.com
2
CPC7556
INTEGRATED CIRCUITS DIVISION
1.4 Recommended Operating Conditions
Parameter
Symbol
Minimum
Maximum
Units
Diode Forward Current (Average)
IF
-
240
mArms
Reverse Voltage
VR
-
100
V
Operating Temperature Range
TA
-40
+125
C
Thermal Impedance
JA
120
-
C/W
1.5 General Conditions
Typical values are characteristic of the device at 25C
and are the result of engineering evaluations. They are
provided for information purposes only and are not
part of the manufacturing testing requirements.
Unless otherwise noted, all electrical specifications
are listed for TA=25C.
1.6 DC Electrical Characteristics
Parameter
Conditions
Symbol
Minimum
Typical
Maximum
Units
-
IF
-
-
240
mArms
0.83
0.91
0.97
1
1.3
1.49
Diode Bridge Characteristics:
Forward Current
Diode Forward Voltage Drop
IF = 40mA
IF = 250mA
VF
V
VR = 100V
IR
-
-
1
A
V+/ = VAK = 10V,
IAK = 110mA
IGT
0.5
1.2
1.8
mA
VGK
2.5
2.8
3.2
V
Trigger Current
-
IAKT
-
25
40
mA
Hold Current
-
IH
70
100
-
mA
VGK = 0V, IAK = 5 uA
VDRM
110
-
-
V
Reverse Voltage Leakage Current
Thyrister Characteristics:
Gate Trigger Current
Gate Trigger Voltage
Peak Off State Voltage
3
www.ixysic.com
R04
CPC7556
INTEGRATED CIRCUITS DIVISION
1.7 AC Electrical Characteristics
Parameter
Input Zero Bias Capacitance
Conditions
Symbol
Minimum
Typical
Maximum
Units
V+  V = 0V
Measured from V~A to V~B
C~A~B
-
4.4
12
pF
V~A = V~B
Measured from V+ to V
C+/
-
8.3
20
pF
V+  V = 0V Measured from
V~A to V+/- and V~B to V+/-
C~A/+, C~A/,
C~B/+, C~B/
-
8.5
12
pF
EPP
-
-
300
mJ
EAVE
-
-
14
mJ
Output Zero Bias Capacitance
Bridge Zero Bias Capacitance
Thyristor Peak Pulse Discharge Energy
Thyristor Repeated Discharge Energy
Single Event Over-Voltage
Discharge Energy
Allowable Repeated Discharge
Energy, Rectified 60Hz
2 Typical Performance Data
Diode Forward Voltage (VF)
vs. Temperature
1.2
1.0
0.8
IF=40mA
0.6
0.4
0.2
0
-40
-20
0
20
40
60
Temperature (ºC)
100
80
IF=250mA
2.6
2.4
2.2
2.0
IF=40mA
1.8
1.6
1.4
1.2
1.0
-40
-20
0
20
40
60
Temperature (ºC)
150
148
146
144
142
140
138
-40
-20
0
20
40
60
Temperature (ºC)
80
100
80
100
3.4
Gate Trigger Voltage (V)
Gate Trigger Current (mA)
152
Gate Trigger Voltage
vs. Temperature
3.0
2.5
2.0
1.5
1.0
0.5
0
R04
100
80
Gate Trigger Current
vs. Temperature
-40
Reverse Breakdown Voltage (V)
2.8
IF=250mA
1.4
Diode Forward Voltage (V)
Diode Forward Voltage (V)
1.6
Diode Reverse Breakdown Voltage (VRRM)
vs. Temperature
Bridge Forward Voltage (VF)
vs. Temperature
-20
0
20
40
60
Temperature (ºC)
80
100
3.2
3.0
2.8
2.6
2.4
2.2
2.0
-40
-20
www.ixysic.com
0
20
40
60
Temperature (ºC)
4
CPC7556
INTEGRATED CIRCUITS DIVISION
3 Manufacturing Information
3.1 Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the
latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee
proper operation of our devices when handled according to the limitations and information in that standard as well as
to any limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to
the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC7556N
MSL 1
3.2 ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard
JESD-625.
3.3 Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of
J-STD-020 must be observed.
Device
Maximum Temperature x Time
CPC7556N
260C for 30 seconds
3.4 Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable, and the use of a short drying bake may be necessary. Chlorine-based or
Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be
used.
Pb
5
e3
www.ixysic.com
R04
CPC7556
INTEGRATED CIRCUITS DIVISION
3.5 8-Pin SOIC Package Dimensions
1.270 REF
(0.050)
Pin 8
PCB Land Pattern
0.60
(0.024)
0.762 ± 0.254
(0.030 ± 0.010)
3.937 ± 0.254
(0.155 ± 0.010)
5.994 ± 0.254
(0.236 ± 0.010)
5.40
(0.213)
Pin 1
1.55
(0.061)
0.406 ± 0.076
(0.016 ± 0.003)
4.928 ± 0.254
(0.194 ± 0.010)
0.559 ± 0.254
(0.022 ± 0.010)
1.346 ± 0.076
(0.053 ± 0.003)
1.27
(0.050)
Dimensions
mm
(inches)
0.051 MIN - 0.254 MAX
(0.002 MIN - 0.010 MAX)
3.6 Tape & Reel Dimensions
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
W=12.00
(0.472)
B0=5.30
(0.209)
K0= 2.10
(0.083)
A0=6.50
(0.256)
P=8.00
(0.315)
User Direction of Feed
Embossed Carrier
Embossment
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC7556 - R04
©Copyright 2012, IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/18/2012
R04
www.ixysic.com
6
Similar pages